Index Cutting Machine, model RG

half-automatic Index Cutting Machine for index cutting on brochures, catalogues and loose sheets

Book height  min.  85 mm, max. 310 mm

Book width   min. 125 mm, max. 350 mm

Working height per cut  approx. 8 mm

Option: different forms of knives available

Gluing Machines model ZW/ZWD and model TZW 132 II

Gluing Machines in different models and with a selction of optional accessories:

model ZW/ZWD - Sheets are glued from below, machine can be used for gluing numerous materials such as paper, board, etc., different sizes available from 400 up to 800 mm, for use of cold glue or hot animal glue, optional: stand (after request mobile), installation of a frequency converter for variable speed drive

model TZW 132 II - Sheets are glued from above, machine can be used for gluing paper and board up to 12 mm thickness, different sizes available from 500 mm up to 1200 mm, particularly suitable for big sizes lamination, for use of cold or hot animal glue, with conveyor belt 3 mm long, optional: pneumatic glue pump and heating for glue roller and glue ciculation pump with melter and viscosity control system, rollers made of stainless steel, additional length of conveyor belt

Book Back Rounding Machine model BRM 500

very rugged construction, operated manual, for rounding of thread sewn or perfect-bound book blocs up to a maximum book thickness of 100 mm, working width 540 mm,

output appox. 400 books per hour

Twin Press model ZP 39 and model ZP-Combi

hydraulic book-press, pressure infinitely variable, max. pressure 5000 kgs, mobile, working height 390 mm (both models)

model ZP 39 - with two pressure plates 320 x 440 mm, each pressure plate is working independently

model ZP-Combi - with a large pressure plate 700 x 440 mm or after change-over with two pressure plates 320 x 440 mm

Corner Rounding Machines, models EH I, EK 100 and EK-D 100

..depending of the use there are 3 different models available ..

model EH I, manually, max. pile height 50 mm, radius of round corner die after request

model EK 100, with helical geared motor, strong machine for continuous production, equipped with top and bottom knife, max. pile height 100 mm, radius of round corner die after request, special kind of tools are available

model EK-D 100 wilth helical geared motor, technical details similar model EK 100, for cutting two corners in one punching operation, in the machine are installed 2 top knives, these knives are cutting against an exchangeable cutting bar, max. distance between knives 350 mm

Rotary Board Cutter model KRS II

for the use of cutting board up to a thickness of 4 mm, with 7 pairs of cutting knives, opening with 1200 mm, cutting speed is variable, feeding table with hopper feeder for cutting the stripes, central lubrication, delivery table