Chengdu Xingraphics Co., Ltd.

Juguang Road # 79, Xindu Industrial Zone, Sichuan, 610500 Xindu, Chengdu
China
Telephone +86 28 85925222
Fax +86 28 85925221
info@xingraphics.com

Location

Hall map

drupa 2016 hall map (Hall 4): stand F60

Fairground map

drupa 2016 fairground map: Hall 4

Contact

Vivi Liu

Employee
Marketing, sales, advertising, PR

Juguang Road 51#, Xindu Industrial Zone Chengdu,Sichuan,610500,P.R.China
Chengdu 610500, China

Phone
+86-28 8396 6666

Fax
+86-28 8592 5221

Email
liutt@xingraphics.com

Our range of products

Product categories

  • 01  prepress/print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.020  Computer to plate systems for offset printing
  • 01  prepress/print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.035  Processing systems (film & printing plate)

Our products

Product category: Computer to plate systems for offset printing

Fit News

FIT News is a high speed thermal CTP plate designed specifically for newspaper printing. Low laser energy requirement and resolution of 1-99% at 250lpi guarantee fast and accurate pre-press and print results. Manufactured with strict quality control production procedures, FIT News is able to provide newspaper printers reliable, consistent performance on press.


Product specifications:

Type: Thermal positive CTP Plate

Suitable for: Newspaper printing

Substrate: High quality grained and anodized aluminum

Maximum width: 1450mm

Spectral sensitivity: 830 nm

Exposure energy: 100-110mj/cm2

Resolution: 1-99%@250 lpi

Run length*: 150,000 unbaked, 1,000,000 impressions when post-baked
                    *Run length depends on processing and printing quality control and conditions.

UV ink compatibility: Applicable with UV inks when post-baked

Shelf life: 18 months when stored away from excessive cold, heat and humidity

Storage conditions: Store plates flat in their packaging, away from excessive cold,heat or high humidity at 5℃~30℃, with RH between 40~80%

Post-baking recommendation : 230 ~ 250 ℃ , 5 ~ 8 minutes

More Less

Product category: Computer to plate systems for offset printing

Fit Envase

FIT Envase is positive thermal CtP plate designed for high quality UV printing

Product Information

Unique hybrid technology:

Our unique plate graining technology (marked with “ Hybrid technology”) allows for lower water usage in most printing environments, especially when printing alcohol free. Average water savings is up to30%. This water savings has a direct relationship to ink savings, better color and faster drying.

Low chemical consumption:

FIT Envase plates is a low chemical consumption product. Replenishment rates only 70~90 ml/m2

Cost effective and easy to use:

FIT Envase is a positive working thermal plate that does not require pre-heat. Coupled with its unique aluminum graining, this produces has a wider operational latitude in addition to economical benefits is that exceed the abilities of many other plates.

High run length:
Up to 100,000 impressions without baking with UV inks/ Solvent Based Coating
Up to 250,000 impressions without baking with Conventional inks

Precise dot reproduction:

Excellent performance in dot reproductionand linearity. The dot proportion tolerance is less than 1% without calibration. This provides perfect image and color reproduction and gives printers the ability to print 25 micron screening.
*10 micron screening capable, depends on platesetter.

Dual coating plate technology:

FIT Envase utilizes a dual plate coating technology on a thermal positive plate allowing customers to print with UV inks and in  aggressive chemical environments without  baking. This is the perfect solution for customers  who want to be able to use high-resolution  plates and do not want to have to bake the  plates when printing with UV inks.


 

More Less

Product category: Computer to plate systems for offset printing

FIT eCO Processless Thermal Plate

 As an international corporate citizen, we are conscious of the direct and indirect environmental impact of our decisions especially in our manufacturing and R&D business units. We understand the need to take responsibility directly, that is why we recycle water, chemistry and gasses throughout our manufacturing process and utilizing bio-degradable materials wherever possible to ensure we protect our employees health and safety as well as safeguard our environment.

Our FIT eCO thermal plates are a true process-less thermal plate technology, eliminating the need for chemistry and or additional equipment removing further energy requirements whilst maintaining optimum printing results to our valued customers world wide and protecting the environment.

Finally, we are proud to highlight that Xingraphics is ISO14001:2004 Environmental Management System certified.

More Less

Product category: Computer to plate systems for offset printing

FIT Invado

FIT Invado thermal CtP Plate is specifically designed for cost-conscious printers, who needs medium to long run lengths with high-performance press quality. It uses advanced thermal plate technology to deliver 1-99% at 250 lpi resolutions, which will satisfy general commercial print quality requirements. Manufactured with strict quality control production procedures, FIT Invado is able to provide printers excellent and reliable pre-press and print results

Product Information

Consistent performance:

A combination of state of the art production technology and strict quality control procedures throughout the production process to provide our customers with stable and repeatable performance. Guaranteeing superior finished results.

Fast imaging speed:

Fast exposure to maximize the output of CtP devices and increase efficiency

High run length:

Over 100,000 impressions without post-baking and more than 1,000,000 when post-baked.

Unique plate technology:

Our unique plate graining technology allows for lower water usage in most printing environments, especially when  printing alcohol free, or with an alcohol substitute. Average  water savings is up to 30%. Due to the physical characteristics involved in ink/water balance on press, a reduction in water means that you can also reduce your ink consumption by the same percentage and still achieve the desired solid ink densities. This unique quality allows for faster makeready, better color control and faster drying times thus allowing for more production. All the while eliminating the harmful effects that come with too much fountain solution, i.e. emulsi白cation, sheet instability and bindery issues.

Cost effective and easy to use:

FIT Invado reduces overall cost of operation by coming up to colour faster due to its excellent ink/water balance characteristics, using ink more efficiently. FIT Invado is a positive working thermal technology which does not require pre-heat coupled with its wide operation latitude and
reliability provides consistant, reliable plate making.


.

More Less

Product category: Computer to plate systems for offset printing

Primus Plus

Primus+ Hybrid technology provides the best solution available when using a "wet" CTP plate. Long run length (including the ability to bake) combined with low chemical consumption and reduced water and ink on press, gives printers the best all around option. Printers will see better color control, with faster drying times which increases production. Lower water and ink usage on press means that you will be ecologically friendly, in most cases reducing your carbon footprint more than if you use process-less or chem-free plates.

Product information

Unique hybrid technology:

Due to the unique way we manufacture our Primus Plus plate has a robust high contrast solvent resistant thermal top layer coated over the electrochemically grained hybrid technology –this will give the printer the ability to print over 250,000 copies or print up to 1 million copies even with UV ink after post baking.

Low chemical cost saving:

The Primus Plus has wide processing latitude and requires only 70-90ml per sqm replenishment rates. The chemical saving contines into the press room with the printer having the ability to reduce his ink and water level to a minimum – many of our existing customers enjoy up to 30% lower water settings and up to 15% lower ink consumption than our equivalent competitors low chem CtP plate solutions.

Precise dot reproduction:

Excellent performance in dot reproduction and linearity. The dot proportion tolerance is less than 1% without calibration. This provides perfect image and color reproduction and gives printers the ability to print 10 micron screening.

High run length:

Over 250,000 impressions unbaked;1,000,000 impressions when post-baked
Upto 20,000 impressions possible with UV ink when unbaked

Cost effective and easy to use:

Primus+ Hybrid is a positive working thermal technology that does not require pre-heat. Coupled with its unique aluminum grain, this produces a wider operational latitude in addition to economical benefits its that exceed the abilities of other plates.

 


More Less

Product category: Processing systems (film & printing plate)

Primus Plus

Primus+ Hybrid technology provides the best solution available when using a "wet" CTP plate. Long run length (including the ability to bake) combined with low chemical consumption and reduced water and ink on press, gives printers the best all around option. Printers will see better color control, with faster drying times which increases production. Lower water and ink usage on press means that you will be ecologically friendly, in most cases reducing your carbon footprint more than if you use process-less or chem-free plates.

Product information

Unique hybrid technology:

Due to the unique way we manufacture our Primus Plus plate has a robust high contrast solvent resistant thermal top layer coated over the electrochemically grained hybrid technology –this will give the printer the ability to print over 250,000 copies or print up to 1 million copies even with UV ink after post baking.

Low chemical cost saving:

The Primus Plus has wide processing latitude and requires only 70-90ml per sqm replenishment rates. The chemical saving contines into the press room with the printer having the ability to reduce his ink and water level to a minimum – many of our existing customers enjoy up to 30% lower water settings and up to 15% lower ink consumption than our equivalent competitors low chem CtP plate solutions.

Precise dot reproduction:

Excellent performance in dot reproduction and linearity. The dot proportion tolerance is less than 1% without calibration. This provides perfect image and color reproduction and gives printers the ability to print 10 micron screening.

High run length:

Over 250,000 impressions unbaked;1,000,000 impressions when post-baked
Upto 20,000 impressions possible with UV ink when unbaked

Cost effective and easy to use:

Primus+ Hybrid is a positive working thermal technology that does not require pre-heat. Coupled with its unique aluminum grain, this produces a wider operational latitude in addition to economical benefits its that exceed the abilities of other plates.

More Less

Product category: Processing systems (film & printing plate)

Fit News

Fit News is a high speed thermal CTP plate designed specifically for newspaper printing. Low laser energy requirement and resolution of 1-99% at 250lpi guarantee fast and accurate pre-press and print results. Manufactured with strict quality control production procedures, FIT News is able to provide newspaper printers reliable, consistent performance on press.

Product specifications:

Type: Thermal positive CTP Plate

Suitable for: Newspaper printing

Substrate: High quality grained and anodized aluminum

Maximum width: 1450mm

Spectral sensitivity: 830 nm

Exposure energy: 100-110mj/cm2

Resolution: 1-99%@250 lpi

Run length*: 150,000 unbaked, 1,000,000 impressions when post-baked
*Run length depends on processing and printing quality control and conditions.

UV ink compatibility: Applicable with UV inks when post-baked

Shelf life: 18 months when stored away from excessive cold, heat and humidity

Storage conditions: Store plates flat in their packaging, away from excessive cold,heat or high humidity at 5℃~30℃, with RH between 40~80%

Post-baking recommendation : 230 ~ 250 ℃ , 5 ~ 8 minutes

More Less

Product category: Processing systems (film & printing plate)

Fit Envase

FIT Envase is positive thermal CtP plate designed for high quality UV printing

Product Information

Unique hybrid technology:

Our unique plate graining technology (marked with “ Hybrid technology”) allows for lower water usage in most printing environments, especially when printing alcohol free. Average water savings is up to30%. This water savings has a direct relationship to ink savings, better color and faster drying.

Low chemical consumption:

FIT Envase plates is a low chemical consumption product. Replenishment rates only 70~90 ml/m2

Cost effective and easy to use:

Fit Envase is a positive working thermal plate that does not require pre-heat. Coupled with its unique aluminum graining, this produces has a wider operational latitude in addition to economical benefits is that exceed the abilities of many other plates.

High run length:
Up to 100,000 impressions without baking with UV inks/ Solvent Based Coating
Up to 250,000 impressions without baking with Conventional inks

Precise dot reproduction:

Excellent performance in dot reproductionand linearity. The dot proportion tolerance is less than 1% without calibration. This provides perfect image and color reproduction and gives printers the ability to print 25 micron screening.
*10 micron screening capable, depends on platesetter.

Dual coating plate technology:

FIT Envase utilizes a dual plate coating technology on a thermal positive plate allowing customers to print with UV inks and in aggressive chemical environments without baking.This is the perfect solution for customers who want to be able to use high-resolution plates and do not want to have to bake the plates when printing with UV inks.

 

More Less

Product category: Processing systems (film & printing plate)

FIT eCO Processless Thermal Plate

As an international corporate citizen, we are conscious of the direct and indirect environmental impact of our decisions especially in our manufacturing and R&D business units. We understand the need to take responsibility directly, that is why we recycle water, chemistry and gasses throughout our manufacturing process and utilizing bio-degradable materials wherever possible to ensure we protect our employees health and safety as well as safeguard our environment.

Our FIT eCO thermal plates are a true process-less thermal plate technology, eliminating the need for chemistry and or additional equipment removing further energy requirements whilst maintaining optimum printing results to our valued customers world wide and protecting the environment.

Finally, we are proud to highlight that Xingraphics is ISO14001:2004 Environmental Management System certified.

More Less

Product category: Processing systems (film & printing plate)

Fit Invado

FIT Invado thermal CtP Plate is specifically designed for cost-conscious printers, who needs medium to long run lengths with high-performance press quality. It uses advanced thermal plate technology to deliver 1-99% at 250 lpi resolutions, which will satisfy general commercial print quality requirements. Manufactured with strict quality control production procedures, FIT Invado is able to provide printers excellent and reliable pre-press and print results

Product Information

Consistent performance:

A combination of state of the art production technology and strict quality control procedures throughout the production process to provide our customers with stable and repeatable performance. Guaranteeing superior finished results.

Fast imaging speed:

Fast exposure to maximize the output of CtP devices and increase efficiency

High run length:

Over 100,000 impressions without post-baking and more than 1,000,000 when post-baked.

Unique plate technology:

Our unique plate graining technology allows for lower water usage in most printing environments, especially when printing alcohol free, or with an alcohol substitute. Average water savings is up to 30%. Due to the physical characteristics involved in ink/water balance on press, a reduction in water means that you can also reduce your ink consumption by the same percentage and still achieve the desired solid ink densities. This unique quality allows for faster makeready, better color control and faster drying times thus allowing for more production. All the while eliminating the harmful effects that come with too much fountain solution, i.e. emulsi白cation, sheet instability and bindery issues.

Cost effective and easy to use:

FIT Invado reduces overall cost of operation by coming up to colour faster due to its excellent ink/water balance characteristics, using ink more efficiently. FIT Invado is a positive working thermal technology which does not require pre-heat coupled with its wide operation latitude and
reliability provides consistant, reliable plate making

More Less

About us

Company details

Under theme of “FIT YOUR BUSINESS”, Xingraphics will bring you the thermal CTP plates built in Hybrid technology, which designed for different business requirement or variable pre-press and press environment. whatever business section you are in, or any consideration factors taking into account, we will make sure it fits you through:

Consistent performance

A combination of state of the art production technology and strict quality control, Hybrid technology series plates provide printers with stable and repeatable performance.

Cost effective

Hybrid techonology plates reduce overall cost of operation by coming up to color fast because of its excellent ink/water balance character.

Easy to Use

Hybrid technology plates are a positive working thermal technology which does not require pre-heat coupled with its wide operating latitude and reliability provides stress free storage and transportation requirements as well as energy savings.

Fast imaging speed

Low exposure energy requirement means fast exposure to maximize the throughput.

More Less

Company data

Sales volume

100-199 Mio US $

Export content

> 75%

Number of employees

100-499

Foundation

2006

Area of business
  • prepress / print
  • premedia/ mulitchannel
  • materials
  • equipment/ services/ infrastructure