Product category: Extraction systems for solid, liquid and gaseous substances
Paint Mist Extraction Paintline
The surface finishing requirements in coating operations are high. Frequent colour changes, special paints, short deadlines, different shapes, sizes and materials of the parts to be coated are commonplace. The requirements placed on the paints and lacquers to be processed as well as on environmental compatibility and occupational health and safety are constantly increasing. These requirements and the fact that solvents and paints have a greater density than air and so fall to the floor, were the basic idea behind the development of the paintline product line. It led to the creation of an extraction system installed near the floor or using the underfloor principle. Because, dust- and draught-free zones are the most important requirements for high-quality painting and varnishing. Our Modular Construction System:
NESTRO's tried-and-tested PAINTLINE products produce perfect surfaces.
geräuscharmer Hochleistungsventilator, Wirkungsgrad je nach Typ 82 bis 85% Zuluftdecke mit Filtermatte der Güteklasse EU5 Breite jeweils um 500mm erweiterbar, Rastermaß: 800 x 500mm Filtermatten leicht und schnell zu wechseln Tragkraft: 300 kg/m² keine Profileisenkonstruktion erforderlich Komplettlieferung einschließlich Rosten separate Aufstellung des Ventilators
Maximum flexibility, efficiency and compliance with all statutory provisions ensures that NESTRO provides a complete surface coating solution that is tailored to your specific requirements. Please contact one of our sales representatives for further information.
NESTRO NE-series dust removers comply with all current requirements and are approved for internal installation in workshops (see also BGI [Information provided by the Employers Liability Insurance Association] 739 p. 15). The NE 350 has been registered for approval. Powerful dust removers are ideal for use in the woodworking industry, as extractors for individual machines, small groups of machines or stand-alone solutions (where special extraction requirements exist). They can also be used for related materials, such as plastic, leather, paper or other industrial dusts. Dust removers NE 160 to NE 350 are vacuum filters with fans installed on the clean gas side and outstanding efficiency. All dust removers are equipped with automatic filter regeneration and, from NE 250, with an automatic extinguishing system. In automatic mode, the dust removers switch on and off in parallel with the machines that require extraction.
NESTRO horizontal baling presses are ideal for use in industry, manufacturing and waste disposal operations. They press paper, cardboard and foils, e.g. after material separation using a separator airlock . The benefits of a baling press at a glance:
Pressing force of 80 kN to 400 kN Bale weight of up to 600 kg Large fill opening, low design Press plate travels horizontally, presses against a counter-plate Filling: Manual or automatic Strapping the bale
Founded in 1977, NESTRO® Lufttechnik GmbH is now one of the largest established manufacturers of extraction and filter technology products and systems, the downstream heating technology and surface engineering as well as sorting and disposal technology. More than 180 employees at the three production sites in Germany, Poland and Hungary are engaged in development and production according to individual customer specifications.