Simec Group S.r.l.

Via Verga Nr. 17, 21057 Olgiate Olona (VA)
Italy
Telephone +39 0331 393900
Fax +39 0331 323382
info@simecgroup.com

Location

Hall map

drupa 2016 hall map (Hall 16): stand A46

Fairground map

drupa 2016 fairground map: Hall 16

Our range of products

Product categories

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.310  Roller cleaning systems

Roller cleaning systems

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.340  Inking rollers

Inking rollers

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.345  Damping rollers

Damping rollers

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.350  Chill rollers, web-fed machines

Chill rollers, web-fed machines

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.355  Coating rollers

Coating rollers

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.360  Impression cylinders

Impression cylinders

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.365  Anilox rollers

Anilox rollers

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.370  Sleeves

Sleeves

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.375  Gravure cylinders

Gravure cylinders

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.385  Doctor blades

Doctor blades

Our products

Product category: Gravure cylinders

Deltor R

This product is largely used in those areas where the roll maker uses an electronic type engraving system.

The structural features involve galvanic copper coating with a layer thickness from 300 to 1000 microns.

After copper plating and grinding, the roll is engraved by Simec using the conventional mechanical system by tool. The possible screens are listed in the technical data sheets for mechanical engravings.

The use of this item is recommended either when the rolls to be refurbished have already a copper substrate or when the rolls need diameter re-building. It is also used on applications where accidental damage is not the primary reason for the replacement of the roll.

This type of roll is frequently used for spreading, but in such cases Simec prefers suggesting the Deltor N structure.

More Less

Product category: Gravure cylinders

Deltor N

This product has been manufactured for years and is used in the field of spreading and coating.

Its structural features involve a galvanic nickel coating both in the horizontal and in the vertical sense according to the roll size. The thickness may vary from 300 to 1000 microns.

The nickel having a hardness between 200 and 300 HV will then be engraved mechanically according to the customer’s requirements and then protected by a catalysed galvanic chromium coating having a hardness of over 1000 HV.

The manufacturing process involves special operations of polishing and previous run-in, which are necessary to ensure an excellent emptying of the cells and a constant product release in grams from the first meter of material produced.

The possible screens are listed in the technical data sheets for mechanical engravings.

More Less

Product category: Gravure cylinders

Deltor T

This product can be considered as the first Anilox roll used for flexoprinting. Its extremely simple structure is still widely employed in the printing industry, especially in the applications where a rubber roller for counter-pressure is used.

The galvanic chromium coating ensures a good resistance to corrosion and to wear, especially on solvent-based applications. As regards water-based applications, the resistance to corrosion is good. There might be particular cases where the characteristics of water from the mains might cause corrosion problems. In such cases, a roll structure of the Deltor N or Deltor R type is recommended.

Engraving is carried out mechanically on carbon steel. The anti-wear protection is ensured by galvanic chromium coating (standard hardness 890 HV), having a layer thickness from 10 to 30 microns.

The possible screens are listed in the technical data sheets for mechanical engravings.

More Less

About us

Company details

Simec Group is a family-run business that for the past fifty years has designed and produced rollers and sleeves for many uses and applications, including editorial and packaging flexographic printing, glues and adhesive coatings and embossing of various materials.

Simec Group has been operating in the flexographic and embossing fields since 1960 and today it’s one of the most representative companies worldwide. Created by the idea and entrepreneurial spirit of its founder, Mr. Renato Della Torre, the company has registered numerous patents thoughout the years and internally developed the plant and production systems to make them suitable for the various industries of reference.

Simec designs and manufactures its own products. All of Simec’s articles are produced in the company plants.

Simec has three factories (for a total covered area of 21.000 sqm out of an overall area of 62.000 sqm.) and twelve production lines, which ensure a steady stream of products to the market. Thanks to this capacity, the delivery of rollers and sleeves is always in line with the times required by the production needs of the customers.

Thanks to consolidated partnerships and important and constant investments in the Research & Development field, Simec is now able to face the new market requirements particularly those of machine manufacturers in the converting and printing industry.

More Less

Company data

Sales volume

10-49 Mio US $

Export content

max. 75%

Number of employees

50-99

Foundation

1960