Tailored hot foil reels: OptiFoil serves to cut hot foil in-house to size specifically for each individual stamping job. Directly when needed. In the desired foil width and length. This saves you time and money, makes your production more flexible and speeds up job processing.
> Cost-efficient purchase of hot foil stock in large reels > Optimized foil utilisation thanks to tailor-made individual reels > Smooth foil payout thanks to separately cutting each foil layer > Dust-free winding thanks to extracting device > No unwanted fusing of the cut edges (as with conventional methods cutting through the entire reel) > Suitable for all foil thicknesses > For 1'' and 3'' cores
Save time twice: First, clichés are fixed to the mounting plate at highest register accuracy in a single step with the cliché positioning system KAMA CPX. And secondly, another job can still be running on the cutting machine while you prepare the die. The CPX can be used for all positioning work for hot foil stamping, hologram stamping and cold embossing jobs, but also for setting up cutting dies.
> Saving in set-up time Quick cliché mounting at highest register accuracy outside the cutting machine.
> Precise positioning The CPX reads the work files directly, computes the target position and indicates it on the monitor. The actual cliché position recorded by a camera is laid on top on the monitor without shades.
> Easy to operate The clichés are mounted to the indicated target position is one step. Thermal expansion of mounting plate and clichés is calculated and compensated for automatically.
> Versatility For any positioning work on hot foil and hologram stamping modules, magnetic plates, hot cut systems and universal chases.
Fast changeovers, best registration: When it comes to short-run folding carton production the DC 76 Foil ASB provides all applications needed to turn digitally printed sheets into the precisely die-cut and 100 % separated blanks - including finishing with hot foil and hologram if desired. Highly efficient, highly profitable and in the high level of quality brand manufacturers demand. Flexible and network compatible, the "short-run expert" DC 76 Foil is the ideal post press partner for your digital printing press.
Special features and benefits
> Multifaceted use: die cutting, creasing, embossing, Braille embossing, perforating, hot foil stamping, combined hot foil stamping and embossing (relief) > USP: KAMA SBU for inline stripping and blanking without the need for tools (!) > USP: KAMA AutoRegister aligns each sheet to a print mark for highest precision with digitally printed or cut sheets (+/- 0.1 mm) > Flexible use according to the actual job (die cutting/cold embossing, finishing) > Universal chase for dies of all sizes > Very quick changeover (just 10 minutes) thanks to KAMA's principle of a removable heating plate > Motor-driven pressure control system (MPC) > Quick-change heating plate system for hologram and hot foil clichés > Timed air blast system to facilitate foil detachment > Energy-saving: six separately controllable heating zones > Space-saving design > Ideal for converting and finishing high-quality folding cartons which have been digitally printed e.g. on an HP Indigo 30000 digital press
> Upgrade for application of holograms > Cutting pressure indicator on the display and overload protection > Module for hot cutting and creasing of plastic materials
Versatile solution for the size 3B: Thanks to a wide range of applications and short set-up times, the finishing die cutter is the ideal machine for processing and refining sheets up to 1050 x 740 mm. Change-over from hot foil stamping to cutting and creasing is quick and easy: The detachable heating plate is replaced by the chase for the dies or vice versa in just 15 minutes. After a heating time of only 5–10 minutes you can start hot foil stamping.
> Wide range of applications > Change-over from hot foil stamping to cutting takes just 15 minutes > Flexible use depending on the actual job type (cutting/creasing and finishing) > Motor-driven pressure control system (MPC) > Quick-change heating plate system for hot foil clichés > Delivery unit monitoring with a camera > Energy-saving: six separately controllable heating zones
Can do what the customer needs: The versatile ProCut 76 Foil with no less than 10 different applications makes your post-press processes highly flexible to satisfy the customers needs. And profitable for you. For hot foil stamping, hologram application, and cutting, creasing, perforating, kiss-cutting and blind embossing. Be it commercial products or packagings. Great benefit: Job set-up is done in a jiffy. To give you the chance to process and finish even the smallest and personalised print runs in a profitable way. NEW: The KAMA AutoRegister adjusts each sheet to a printmark and secures high accuracy also with digitally printed and cut sheets.
Features and benefits
> All with a single machine: cutting, creasing, perforating, kiss-cutting, cold embossing, Braille embossing; hot foil stamping, combined hot foil stamping and embossing, hologram stamping and hot cutting as options > Very fast changeover from hot foil stamping to die cutting and reverse (just 10 minutes) > Motor-driven pressure control system (MPC) > Flexible use depending on the actual job type (cutting/embossing and finishing) > Universal chase for existing and small dies > Highest register accuracy (less than 0.1 mm) > Quick-change heating plate system for hologram and hot foil clichés > Energy-saving: six separately controllable heating zones > Timed air blast system for easy foil detachment > Space-saving design
New value added to your post-press processes: The worlds first finishing die cutter ProCut 58 Foil for a size of 580 x 400 mm boasts a multitude of applications. For excellent print products with classy hot-foil stamp, embossing or hologram. Also as a valued security feature for vouchers, tickets and brand protection. Offer your customers noble finishing also of small runs profitably and efficiently. Be it printed matter or packagings, offset or digital printing.
> Versatile use: 10 different applications with a single machine > Very quick job set-up (just 5 minutes) thanks to KAMA's principle of a removable heating plate > Highly flexible use for finishing and refining tasks > Highest register accuracy (less than 0.1 mm) > New: motor-driven pressure control system > New: timed air blast system to facilitate foil detachment > Space-saving design (footprint less than 5 m²) > Efficient finishing of small and personalised print runs
Versatile, profitable, successfully used world-wide: The Automatic Die Cutter ProCut 76 stands for high-quality and efficient post-press processing of 760 x 600 mm sheets. Lowest set-up times, user-friendly features and quick job change make the ProCut 76 your economical solution for all finishing tasks of job printers and packaging manufacturers. NEW: The KAMA AutoRegister adjusts each sheet to a print mark and secures most accurate finishing of digitally printed and cut sheets.
Features and benefits
> Multifaceted applications for the 760x600 mm size > Motor-driven pressure control system (MPC) > Universal chase for the use of existing dies > Platen changing system (4+1 mm) for quick job change > Profitable finishing also of small runs > Highest register accuracy (+/-0.1 mm) > Clean cutting contours thanks to very few to no nicks > ProCut principle of a moving upper table for gentle sheet pass on one level > Space-saving design
> NEW: The KAMA AutoRegister aligns each sheet to a print mark (+/- 0.1 mm) and secures accurate converting of digitally printed sheets and cut sheets > Cutting pressure indicator on the display and overload protection > Magnetic plate for cutting and kiss-cutting of filigree contours > Hot-foil and hologram stamping module available for retrofitting > Module for hot cutting of plastic materials
Innovative and versatile: The worlds first B3 flat-bed cutter is your flexible solution for all finishing tasks of 580 x 400 mm sheets. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing.
> NEW: AutoRegister, aligns each sheet to a print mark > Multifaceted applications for the 580 x 400 mm format > Highest register accuracy (less than 0.1 mm) > Profitable finishing also of small runs > Clean cutting contours thanks to very few to no nicks > Moving upper table ensures gentle passage of the material > Space-saving design, requires only 4.5 m²
> Motor-driven pressure control system (MPC) > Cutting pressure indicator on the display and automatic overload protection > Platen changing system (4+1 mm) > Module for hot cutting of plastic materials > Hot foil and hologram stamping module available for retrofitting
Precise set-up time planning and quick job set-up are crucial if you want to process small runs and a variety of different folded and glued products profitably. The new Job Planner for the ProFold 74 serves to optimise this process.
> Quickening set-up
The software calculates an optimum set-up plan for every print product. Based on precise position information from the Job Planner, the operator can configure the machine in a well-directed manner, thus saving a lot of time.
> Reproducible repeat orders
Data for repeat orders are saved in the archive of the Job Planner. The operator thus has a suitable set-up plan ready at hand if needed and can set up the machine in exactly the same way thanks to the grid-type mounting system of the ProFold.
> Profitable and precise planning
How much time do we need to process a specific job? What are our actual production costs? The calculation module of the Job Planner gives answers to these questions. Job-related production times and costs can be determined with just a few clicks. For good planning and reliable meeting of deadlines.
Fast lane for short-run folding cartons. Short runs, short delivery times. That is uncharted territory for folding box production. When it comes to folding and gluing, the innovative solution is called KAMA FlexFold 52. The first folder-gluer dedicated to short runs has a fully automated set-up (patent pending), making job and format changes incredibly fast. Whether its beautifully finished folding boxes for beauty, healthcare and consumer goods or versioned pharmaceutical boxes with Braille: with the network compatible FlexFold 52 you will turn those short runs into a profitable Business.
Features and benefits
> Folding + Gluing of: > Straight-line boxes > Automatic boxes (crash-lock) > Slip-lid boxes > USP: Fully automated set-up of the entire production line for very fast changeovers > USP: KAMA APA-system brings the entire production line in position (Automated Plough length Adjustment) > Network-Integration via JDF/JMF > Pre-breaking > Lower gluing unit with high precision > Gluing line inspection with rejector > Barcode inspection with rejector > USP: 100 % inspection in the end2end workflow with HP Indigo 30000, AVT system and KAMA DC 76 die cutter > Compact design for small footprint > Inline Braille unit
Manual work was yesterday: Today, the ProFold 74 folds and glues blanks into a multitude of print products automatically and cost-efficiently. In shortest time and at continuously high quality. Be it presentation folders, CD pockets, ticket envelopes, cross folders or folded boxes with crash-lock base. Great plus: Innovative tools and quick set-up thanks to the grid-type mounting system make processing of small and personalised runs profitable.
> Flexible use for a wide range of products > Quick and reproducible set-up > Unique, grid-type mounting system > Suction-belt-type or flat stack feeder to your choice > Innovative optional device pool including capacity folding device (4 to 25 mm), dispensing device, 360°rotation device, adhesive tape dispenser and many more > New: bar code reader > New: device for folded boxes with crash-lock base > New: interactive Job Planner-Software for optimised set-up and cost planning