FINESTFOG GmbH Luftbefeuchtung und Wasseraufbereitung

Alte Landstr. 6, 85521 Ottobrunn
Germany
Telephone +49 89 67359150
Fax +49 89 673591515
info@finestfog.com

Location

Hall map

drupa 2016 hall map (Hall 14): stand D20

Fairground map

drupa 2016 fairground map: Hall 14

Contact

Christian Wagner

Vorstand/Geschäftsführer
Geschäfts- /Unternehmensleitung

Alte Landstraße 6
85621 Ottobrunn, Germany

Phone
+49-8102 - 778480

Email
cwagner@finestfog.com

Our range of products

Product categories

  • 06  equipment/services/infrastructure
  • 06.02  Measuring and testing engineering
  • 06.02.040  Humidity measuring instruments, hygrometers

Humidity measuring instruments, hygrometers

  • 06  equipment/services/infrastructure
  • 06.02  Measuring and testing engineering
  • 06.02.050  Hardness measuring instruments

Hardness measuring instruments

  • 06  equipment/services/infrastructure
  • 06.19  Infrastructure
  • 06.19.010  Air conditioning

Air conditioning

  • 06  equipment/services/infrastructure
  • 06.19  Infrastructure
  • 06.19.015  Air humidifiers
  • 06  equipment/services/infrastructure
  • 06.19  Infrastructure
  • 06.19.035  Fresh water treatment plants for printing houses

Our products

Product category: Air humidifiers

Single-medium nozzle

The FINESTFOG single-medium nozzle is at the heart of every FINESTFOG system. Crafted from high-quality stainless steel and hand finished, each nozzle is engraved to identify it as designed and produced exclusively for FINESTFOG.

The ingenious inner workings, the special bore and precision hand finishing together produce the unique atomization performance. The nozzle atomizes water into finest aerosols capable of being rapidly taken up by the air. A check spring reliably prevents water dripping.

More Less

Product category: Air humidifiers

Pump

The high-pressure pump generates a uniform pressure (80 bar) to supply pressurized water to the individual humidification zones. Available pump ratings range from 120 to 780 litres/hour. Motor and pump rpm are controlled via the pressure sensor and the frequency converter. The pump only delivers as much water as is needed at any moment. This saves energy and wear and tear on the pump.

More Less

Product category: Air humidifiers

Control unit

FINESTFOG attaches great importance to high-quality control systems. Only components from reputable manufacturers like Siemens or Eaton-Möller find their way into our switching cabinets. FINESTFOG control units are offered in two versions:

Eaton-Möller – controller for fully automated control of up to 6 humidifier zones and a maximum humidification performance of 780 litres per hour. Comprises Eaton-Möller PLC, operator display and frequency converter.

Siemens S 7 – the most user-friendly controller, based on a Siemens SPS S7. Up to 8 zones can be humidified. The SIMATIC HMI KP 700 touch panel (7") displays all operating parameters. The controller unit includes a data logger, an operating hours counter for each zone, trend analysis and numerous other auxiliary functions. Options range from remote monitoring to data transfer to a facility management system. Consult our specialists for available configuration variants.

More Less

Product category: Fresh water treatment plants for printing houses

UV-Entkeimung

Optimale Prophylaxe: Die hochintensive UV-Entkeimung schützt gegen Bakterien, Hefen und Legionellen. Der kompakte Aufbau der UV-Entkeimung eignet sich ideal für eine Filtration direkt am Einsatzort.

Das im Vorratstank gespeicherte Reinwasser durchfließt die UV-Entkeimung; und zwar bevor das Wasser von der Hochdruckpumpe unter Druck gesetzt wird.

Die Hochleistungs-UV-Lampen reduzieren Bakterien und Viren um 99,9% – damit sind sie besonders geeignet zum hochwirksamen Reinigen von Befeuchterwasser. Das Bestrahlen des Wassers mit intensivem UV-Licht verhindert weitgehend Keim- und Bakterienbildung.

Weitere Merkmale:

Durchflussmenge 120–1.800 Liter pro Stunde
Edelstahlarbeitskammer, poliert, für Labor und medizinische Anwendungsbereiche
Akustischer Alarm und LED-Lampenausfall-Anzeige
Digitaler Tageszähler zeigt an, wie lange der Strahler noch effektiv arbeitet
7 Jahre Garantie auf Edelstahlarbeitskammer

 

More Less

Product category: Fresh water treatment plants for printing houses

Fountain water treatment

FINESTFOG supplies compact, ready-to-connect water treatment technology for the printing industry. In addition to supplying water for air humidifiers, the provision of fountain water for the printing machines is becoming more and more important.

The heart of a FINESTFOG pure water system is the high-quality composite membrane, specially designed for high efficiency over a long service life. The pure water obtained is brought exactly to the desired water hardness via fine adjustment of the metering station. The advantages for the printing process are enormous:

Compensates for fluctuations in tap water quality
Prevents stripping of the colour rollers and the build-up of lime in dampening and inking units
Longer lifespan for colour rollers
Keeps pH level neutral
Sharply reduces alcohol requirements
Germ-free pure water prevents dampening units from being blocked by microorganisms
Sufficiently large pressure tank even when the fountain water is completely replenished
High-quality hardening agents at a fair price

More Less

Product category: Fresh water treatment plants for printing houses

Soft water treatment

Compact, ready to connect and unpowered – that’s the way the FINESTFOG soft water technology works. Tap water flows through a column filled with cation exchange resin. Magnesium (Mg²+) and calcium (Ca²+) are exchanged for an equivalent amount of sodium ions (Na+). The water softened in this fashion will now contain a proportionately greater amount of sodium salt (cooking salt), but hardly any magnesium and calcium. Both are known as hardeners. The exhausted exchange resin is automatically regenerated by regenerating salt from the storage container. In air humidification systems the sodium ions prevent nozzles from becoming calcified and blocked. In reverse osmosis systems softening units are used for pretreating the process water.

FINESTFOG water softening systems are always of the pendulum type with two resin columns. This guarantees the availability of softwater at all times. Regeneration is quantity-controlled: only when a column is actually exhausted, will it be regenerated. This saves on salt and waste water. An electronic low-salt indicator (optional) shows when the regenerating salt is used up.

More Less

Product category: Fresh water treatment plants for printing houses

Pure water treatment

FINESTFOG’s compact reverse osmosis systems are characterized by an open design and their performance. The systems produce between 100 and 900 litres of pure water per hour (larger capacities on request).

The FINESTFOG osmosis module is at the heart of the water purification system. Its high-quality composite membrane is guaranteed for high efficiency over a long service life.

The open design of the unit makes it easy to monitor performance. Flow meters for permeate and concentrate (waste water) supply information on operating efficiency. A conductivity sensor ensures the highest water quality. A pre-alarm and alarm provide ample warning of rising conductivity. All operating parameters can be called up on a digital display.

There is no risk of water becoming recontaminated, because this is a closed system with only a small buffer tank. An integrated UV sterilization system at the end of the process gives double surety that there are no microorganisms left in the treated water.

More Less

About us

Company data

Number of employees

1-19

Foundation

1994

Area of business

Sonstiges