Flexo Wash is a Danish company specialized in cleaning press parts, aniloxes, rotogravure cylinders etc for the graphic industry. We originate from a label printer so consequently at first our equipment was mainly aimed at this industry, but today our main activities are in both the Flexo and Gravure industry.
Do you want to minimize downtime on your flexo or gravure press and improve your print quality? Then Flexo Wash has the solution for you!
Flexo Wash will as always be exhibiting different cleaning equipment that are necessary to have, if you want to improve print quality, maintain aniloxes and cylinders and simply save money.
Our range of products consists of fully automatic anilox roll cleaners for deep cleaning as well as daily cleaning of aniloxes and gravure cylinders, automatic washing systems for cleaning of ink e.g trays, chambers and buckets, as well as designed washing equipment for rotary screens, plates, print sleeves and other parts.
Cleaning of Rotogravure Cylinders
Cleaning of gravure cylinders is a hard job that takes a long time. Flexo Wash can supply machines that can clean from one cylinder and up to several per hour. In one of the two machines shown you can clean 10-12 cylinders/hour. Simply place your cylinders on the carriage and let the machine do the rest.
The fully automatic sylinders clean with either solvents or environmentally friendly liquids.
Cleaning of Anilox Rolls
The fully automatic Anilox Roll Cleaners clean anilox sleeves and anilox rolls without any wear and tear and also minimize the pollution and the amount of work. This is simply a must have, if you want to keep a high print quality and at the same time maintain your aniloxes. The machine runs with environmentally friendly liquids that are reused in order to keep the liquid consumption very low. The range of products consists of machines for rollers from 150 mm up to 4300 mm, but the cleaning of larger rollers is also possible.
Cleaning of Trays, Chambers, Buckets etc.
Cleaning of press parts is a dirty job, that not many people like doing. Flexo Wash will show ATEX-Proof machines for cleaning with solvents and machines for cleaning with environmentally friendly liquids. All Flexo Wash Parts Washers can be customize to your specific parts, so no matter whether you have Windmöller & Hölscher, Bobst, Nilpeter or other presses, Flexo Wash has the solution for you. Futhermore Flexo Wash has also worked on improving the working environment by having trolleys in front of the bigger parts washers. In this way the operator only has to handle the parts once. He can take the trolley to the press, load the parts and drive the trolley back to the washing machine and push the grid with parts into the machine.
Cleaning of Plates
Missing dots after scrubbing plates in very common, but with the Flexo Wash Plate Washers you will not have that issue. You simply place the plates on the conveyeor in front of the machine and the machine will do the cleaning, rinsing and drying. You can clean 20m plates in 1 hour without any wear or tear to the plates!
Better Quality and Environment
A close attention to the working environment and safety apply to all our equipment. We want to help our customers print better and safe money e.g. by having a more lean cleaning process.