Packaging & Labels Customized & Individualized Printing (incl. Security & Brand Protection) Industrial & Specialized Applications

FAG Graphic Systems S.A.

Rue de la Vigie 3, 1003 Lausanne
Switzerland
Telephone +41 21 3432323
Fax +41 21 3432333
sales@fag.ch

This company is main exhibitor of

Location

Hall map

drupa 2016 hall map (Hall 9): stand C40

Fairground map

drupa 2016 fairground map: Hall 9

Contact

Marlyse DUBEY

Senior head of department
Marketing, sales, advertising, PR

Rue de la Vigie 3
1003 Lausanne, Switzerland

Phone
+41-21 3 43 23-23

Fax
+41-21 3 43 23-33

Email
sales@fag.ch

Philippe ORVILLE

Executive board/managing director
Business, corporate or plant management

Rue de la Vigie 3
1003 Lausanne, Switzerland

Phone
+41-21 3 43 23-23

Fax
+41-21 3 43 23-33

Email
sales@fag.ch

Visit us

Hall 9 / C40

31.05.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

01.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

02.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

03.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

04.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

05.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

06.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

07.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

08.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

09.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

10.06.2016

Topic

Download

all-day

During all the show our specialists are there to demonstrate all the range of the FAG measuring devices and solutions. Hope to have the chance to see you on our booth

More Less

Our range of products

Product categories

  • 01  prepress/print
  • 01.02  Workflow and data handling software
  • 01.02.055  Color management software

Color management software

  • 01  prepress/print
  • 01.15  Printing machines and systems for special printing applications
  • 01.15.010  Proofing machines (all printing methods)

Proofing machines (all printing methods)

  • 04  future technologies
  • 04.06  Inspection and test systems
  • 06  equipment/services/infrastructure
  • 06.02  Measuring and testing engineering
  • 06.02.030  Densitometers
  • 06  equipment/services/infrastructure
  • 06.02  Measuring and testing engineering
  • 06.02.085  Test printing devices (also see Laboratory printing devices)
  • 06  equipment/services/infrastructure
  • 06.02  Measuring and testing engineering
  • 06.02.095  Spectrophotometers

Spectrophotometers

Our products

Product category: Color management software

NEW i1Pro 2

About Next Generation i1Pro Spectrophotometer

The i1Pro 2 spectrophotometer introduces a new level of color accuracy, delivering increased ease of use and an expanded professional level feature set, including supporting the latest developments in industry measurement standards. i1Pro 2 solutions are sure to maximize profitability and minimize wasted time, ink and paper, while delivering the confidence that the user’s digital workflow is perfectly and professionally calibrated and profiled.

New i1Pro 2 spectrophotometer highlights:

New illuminant design allows for 3 standard measurement conditions (ISO 13655 M0: Tungsten; ISO 13655 M1: D50; ISO 13655 M2: UV Cut) plus Optical Brightener Compensation (OBC) without changing filters or needing a second instrument.

Enhanced Optical Brightener Compensation allows for the most accurate profiling (both Tungsten and UV/LED mode) for today’s enhanced range of substrates. Now users can predict what colors printed on optically brightened paper will look like under different light conditions using a single hand-held device.

Positioning Detection with Zebra Sensor provides a more robust scanning experience even on special substrates and low-resolution printers. It allows for the measurement of smaller patch sizes (as low as 7mm) in manual mode and enables dual measurement workflows for OBC, M1 and M2.

New Wizard-driven interface with status LED leads users through the profiling and calibration process while providing all the options and control desired, regardless of expertise.

New Design Ergonomics throughout allows for greater usability, flexibility, cleaning, protection, and storage of the precision i1Pro 2 device.

Improved Emissive Measurement allows for better temperature stability and higher brightness levels resulting in the best possible calibration and profiling of monitors ever.

More Less

Product category: Color management software

I ONE II

Color management system for accurate, predictable and consistent color from scanners, monitors printers and projectors.

More Less

Product category: Proofing machines (all printing methods)

FAG KORREX 2000

10 good reasons for deciding on the FAG Korrex 2000

Your successful future begins with greatly increased performance for proofing with high consistency, according to recommended quality standards. Register is perfect, inking is regular and proofing times are short considering the ideal printing size of 72 x 104 cm.

1. Stable, absolutely distortion-free construction. The machine bed is one heavy piece of cast iron and the machine base, a welded construction, includes strong crosspieces.

2. The printing cylinder is precision mounted in massive sidewalls with special bearings preventing all distortion.

3. Generously dimensioned, newly developed inking unit with four-fold oscillating ink distribution in the traveling and the stationary inking unit, one-way and double inking.

4. the printing cylinder rotates in the stationary position of the cylinder carriage. At the same time, the automatic wash-up device cleans the inking system.

5. The traveling dampening unit carries a minimum amount of dampening solution for brilliant proofs. The stationary anilox roller ensures optimal metering of dampening

6. Wash-up solution flows in a closed tray, giving good protection to the printer from vapours. An additional suction pipe is provided for connection to an automatic extraction device, which is optional.

7. Light-weight inking rollers with aluminium cores can be changed very quickly.

8. Use of modern electronics for controlling the printing process: Microprocessor control enables to replace almost all electrical switching elements. A frequency regulator ensures smooth running of the cylinder carriage.

9. Maximum safety: Operating and emergency stop switches, infrared light barriers on both sides of the cylinder carriage.

More Less

Product category: Inspection and test systems

Prepress Interface FAG CIP 3/4 Reader

Following the trend of digitalisation in prepress, meaning digital assembly of entire sheets using CPF and CPT technology, the FAG CIP 3/4 reader allows you to convert all CIP 3/4 files containing the complete data from prepress operations. This technique guarantees complete agreement with the methods in use. Various output formats are possible for different machine brands: Heidelberg, Manroland, KBA, etc....

More Less

Product category: Inspection and test systems

FAG FLEX3 PRO

FAG FLEX³PRO is an affordable, easy to use Flexo Plate reader that can help you to immediately see, manage and interpret any changes to the parameters and thus achieve a superior quality output.

The state of the art illumination, pickup optics and camera technology of the FAG FLEX³PRO flexo plate reader delivers extremely sharp images. The shoulder portion of the dot is clearly separated from the surface of the dot. Dot printing surfaces with sharp corners that are not artificially rounded due to overexposing can be measured accurately.

The FAG FLEX³PRO software FLEYE³ offers a function to directly compare images, enabling you to see directly the impact of any changes of process parameters. Images captured with any FAG FLEX³PRO device can be loaded and then resized with a resolution of 12700DPI, rotated, corrected in brightness and finally overlaid.

The minimum dot of the flexo plate making process defines the range of values and the perceived resolution of the printed product. But what is the minimum dot? What should the minimum dot look like? How can it be defined and how can it be consistently maintained from one plate to the next, from one day to the next? Looking at the dot shape lets us understand immediately that the dots are not the same, even though the view from top would lead us to think that was the case. The dots differ in shape whilst having an almost identical printing surface. The FAG FLEX³PRO is used to capture the top view and the 3D image by a simple click of the mouse, without the need to re-position the plate.

The mechanical dot size, the contour (shape of the flexo dot) and the ink coverage across the dot itself will often lead to changes in the printed colour.
The FAG FLEX³PRO is a precision device designed to measure and monitor the changes in colour due to mechanical problems of plate, press or ink.

More Less

Product category: Inspection and test systems

FAG BINGOSCAN

This Plate scanner is based on two video camera analysis, which allows the creation of an ink profile. The software gives you the facility to take care of the different paper, plate and machine characteristics. A process of self-teaching is also integrated. The data transfer is possible online via network or via floppy disk, different formats are available.

More Less

Product category: Inspection and test systems

EasyTrax System

EasyTrax is  semi-automated color scanning system for producing accurate CMYK and CMYK + 2 color jobs. Available in multiple press sizes from 20” to 40”,

EasyTrax comes on a measurement board for easy installation and can be adapted to other after-market consoles. EasyTrax includes a black backing so you can achieve or maintain ISO certification, and the characterization data sets for G7 or PSO process control are available to support your efforts to achieve ISO standards.

EasyTrax has the ability to take a scan measurement or spot measurement anywhere on the sheet making EasyTrax the perfect solution for press-side color control for smaller format color presses or for primarily process color environments

More Less

Product category: Densitometers

IntelliTrax II System

The all-new IntelliTrax II series is the industry's fastest, smartest line of auto scanning systems for press-side color control.

With two core models and numerous optional enhancements, this series allows sheetfed commercial and folding carton printers to maximize productivity and profitability during makeready and production.

More Less

Product category: Densitometers

FAG OPADENS

Control the opacity of the white Ink layer on transparent film in an easy and effective manner

More Less

Product category: Densitometers

FAG FLUO

This is the First Portable INVISIBLE INKS DENSITOMETER. Control the correct layer thinkness of invisible inks.Save invisible ink by optimizing and controlling the 100% patch using FAG FLUO. Improve the security of your brand labels with 3 color fluoresent screen tint images and by controlling the dot area with FAG FLUO. Improve the security of your brand label by printing fluorescent half tone contrast
There are 3 models FAG FLUO with LEDlight 365nm or 365nm/280nm or 365nm/255nm

Additionnal Software FLUOCol for visualization of the Fluorescent Color including Spectral representation, Export Capability in Excel file and pdf reporting

More Less

Product category: Densitometers

FAG VIPDENS C5P

  • FAG VIPDENS C5P
  • Measuring and controlling have never been as simple!
  • The automatic densitometer for fast and uncomplicated measurements
  • Automatic recognition of the patch type and choice of the appropriate function and color.
  • Automatic recognition of solid, shadow and nightlight dot gain and balance patch.
  • Built-in polarization filter for measurements on freshly printed sheets.
  • Easy to recognize icons on the LCD display
  • Extremely low energy consumption
  • New ergonomic and compact design of the robust casing.
  • With simple push-buttons commands in the semi-automatic mode reference values are shown, percent-measurements can be done and the unit can be sent to decorative colors and individual series of measurements.
  • FAG VIPDENS C5P is exactly what you need for your quality control.
  • Check and measure your printed matter simply, fast and fully automatic.
  • Presentation of the measured results is additionally simplified by easy understandable symbols.
  • Included functions
  • Automatic paper recognition (zeroing)
  • Secondary densities, color balance
  • Automatic color recognition (CMYK)
  • Color balance
  • Automatic patch type recognition
  • Dot gain 3 ref ¼, ½, ¾
  • Automatic balance patch recognition
  • Dot gain curve
  • Automatic trapping mode
  • Out of tolerance indic. and corr. options
  • Density
  • 1 customized reference set
  • Density difference
  • 3 defined standards (Fogra)
  • Grey balance
  • Slope

 

Technical features

 

ELEMENT SPECIFICATION

  • Aperture 3 mm (Option 2 mm)
  • Density D 0,00 – 2,50
  • Percent % 0-100
  • Measuring Time 0,5 seconds
  • Graphical Display 160 x 80 Pixel
  • Repeatability D +/- 0,01 D
  • Linearity % +/- 1 %
  • Interface Computer Interface
  • Measurements (per battery set) >500.000
  • Batteries 2 Alkaline 1,5 V size AA
  • Filter Status I, E, T
  • Polarization Filter E and T optional
  • Dimensions (mm) 175 x 75 x 47 cm
  • Operating conditions Temperature 10° - 40°
  • Rel. humidity 10 % - 90 % Non-condensing
  • Storage conditions Temperature –20° - 60°
  • Rel. humidity 10 % - 90 %

Composition and printing errors excepted. All technical specifications, features and use are subject to change without notice.

More Less

Product category: Densitometers

FAG PRESTO DELTA E

PRESTO DE : Efficiency, Economy, and delta E converge in a new measurement solution

FAG will launch the new Spectrodensitometer PRESTO DE at DRUPA2012. The PRESTO DE offers unprecedented ease of use in a press-side ink and color control system. The high cost and complexity of laboratory spectrophotometers make them a poor choice for color control on the production floor. Their bewildering array of functions and settings requires more training than many shops can afford and most operators can tolerate. Without a suitable alternative, “eyeball” control takes over with unpredictable results. The PRESTO DE offers all the necessary measurement functions in a quick, cost-effective, and easy-to-use instrument.

PRESTO DE is a non-polarizing Spectrodensitometer with Status E filter set. Because plastic film substrates have a natural polarizing effect, the use of a polarization filter would be counter-productive. The PRESTO DE measures Density, Dot Gain, Dot Area, Balance, and finally Delta E 2000. (Figure 1.)

One of the most important quality parameters in flexo printing is ink transfer. Obtaining optimal ink transfer is a prerequisite to achieving the desired color strength in the print. Ink viscosity, anilox volume, plate material and substrate also affect ink transfer, as does press speed and environmental conditions. Because of the excellent correlation of optical density to the human visual response, densitometers have been successfully used for many years with excellent results in press control of the ink transfer. Both process and spot colors lend themselves to density control, and the PRESTO DE automatically selects and displays the correct color channel for the operator.

Impression and rolling conditions have to be optimized to avoid doubling and slur effects and to avoid excessive or premature plate wear. Impression hexagons are widely used to subjectively evaluate the impression settings on a press. An alternative visual control can be done using the DFTA AKE 1.0 control element described in „DFTA Leitfaden für die Flexodruckvorstufe v1.0“. More precise control is easily implemented by using a target consisting of vertical lines (machine direction) and horizontal lines (cross direction) to optimize the pressure between anilox and plate, as well as between plate and substrate. The pressure between plate and substrate has a higher impact on horizontal lines than it has on vertical lines. Therefore the dot area measured in the horizontal line patch is typically higher than the dot area measured in the vertical line patch. The optimal pressure is achieved when the two dot area values match. Once the plate-to-substrate pressure is optimized, the anilox-to-plate pressure can be reduced as long as the minimum dot patch is still printed. The PRESTO DE can be used to measure the dot area quickly and easily during press setup and to detect small changes of the rolling conditions during the run of the press (see figure 2: line elements).

The smaller the printed minimum dot, the closer the flexo printing quality is to competing print methods. During setup and characterization of the printing process the FLEX³PRO from PERET is of great help, as it delivers high resolution images of the print. Dot size and geometry can be measured while dot void and mottling can be evaluated. During normal production, the PRESTO DE can be used to check if the minimum is still printed correctly or if there are printing problems (see figure 2: minimum dot)

Special (spot) colors are widely used in FLEXO and packaging. The color is prepared in the ink department using color formulation systems and Spectrophotometers. Ideally, once the ink is at the press, no further ink mixing (toning) should take place. Nevertheless it is sometimes necessary to make adjustments. These changes should be measured in terms of delta E. The PRESTO DE device can be used for a quick check of the accuracy of the color match in terms of Delta E2000.

FAG offer a wide range of control instruments for Flexo and Packaging. The new PRESTO DE makes the portfolio even more complete and cost-effective.

Dipl.Ing. Lukas Pescoller

www.fag.ch

More Less

Product category: Densitometers

FAG DENS D3

The FAG DENS D3 , the new Densitometer developed for FAG introduces a totally new positioning concept: it's not just easy to use, you will love to use it.

With the FAG DENS D3 , the proper densitometer for every single pressman measures solid density, dot gain, dot area, balance, and density differences in a fast and easy manner. Automatic zero and automatic color recognition is implemented as well. The simple and robust mechanics, the power saving electronics, and the LED technology assures a long life time of the device. With only 2 AA batteries you can take measurements over a long period of time without the need to connect the device to power for recharging.

More Less

Product category: Densitometers

EasyTrax System

EasyTrax is NEW semi-automated color scanning system for producing accurate CMYK and CMYK + 2 color jobs. Available in multiple press sizes from 20” to 40”, EasyTrax comes on a measurement board for easy installation and can be adapted to other after-market consoles. EasyTrax includes a black backing so you can achieve or maintain ISO certification, and the characterization data sets for G7 or PSO process control are available to support your efforts to achieve ISO standards. EasyTrax has the ability to take a scan measurement or spot measurement anywhere on the sheet making EasyTrax the perfect solution for press-side color control for smaller format color presses or for primarily process color environments

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG Corrcheck

We are proud to present our pocket size FAG CORRCHECK .
The Sensor is connected to a PC via a USB2.0 port and supplies a view of
the Mechanical WASHBOARD Effect, mesure the FLUTE PROFILE and the CREASING on corrugated.

This device is the optimum tool to control the converting process.
Mechanical characteristics of corrugated, flute dimensions and liner types are key parameters for good looking packaging products.

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG Rount

The FAG FLEX³ PRO reads all transparent flexo plates from 0.5% to 98% within a screen ruling range of 50 Lines/Inch up to 300 Lines/Inch. Also the total dot surface area in % of stochastic screens and hybrid screens can be measured.
In addition the FAG FLEX³ PRO offers functions to evaluate the DOT SHAPE in the 3rd dimension.

The ROUNT Option is a mechanical holder for Transparent sleeves with integraded ligth source for good stability in transmission analysis

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG E-GUIDE PRO

The FAG CREASY with the E (Embossing) GUIDE PRO and its new 3D dedicated visualization software :

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG FLEX3HR


High resolution measurement at 43‘000ppi
FAG FLEX³HR

Micro Structures on Solids to improve the Ink Transfer and the Solid Quality

Reproduce consistently your Solids by controlling the Imaging of the Micro Structures on engraved LAMS

The Impact of 1 micron: The physical variations in size of Dots are directly linked to its overall size

The Impact of 1 micron. The Solid shows deviations in Dot Size of approx. 5% inside one single patch

High Screen Rulings require High Resolution Images

The evaluation of complex Dot Shapes require High Resolution Images

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG Flex3PRO XXL

The FAG FLEX³PRO XXL is an extra mechanical long reach arm with transmission ligth source. this coud be integrated into a table or mounted between two tables.


The FAG RELIX P is relief mesurement mechanical clock with USB data transfer to the FAG FLEX³PRO software.


The FAG FLEYEplus offers functions for Fast Quality Reporting

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG Relix-P

FAG RELIX-P

FAG has enhanced the FAG FLEX³ PRO accessory family by the FAG RELIX-P System, a digital micrometer with remote control, such as measurement data can directly be imported into the FAG FLEX³ PRO software and measurements can be fired without touching the micrometer. This leads to higher precision in relief depth measurements for flexo plates.

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG Gloss III

• sturdy construction with aluminium housing

• luminous graphical OLED display switchable for equally com-fortable operation by right or left handed users

• stand-alone operation mode or using the USB-cable for trans-mitting the results efficiently directly to the PC/laptop

• precise results within seconds with automatic gloss range shift

• stray light compensation allows exact measurements of trans-parent objects

• automatic prompt for calibration if necessary

• automatic recognition of standard

• calibration unit ensures correct positioning during calibration and protects the working standard and the optic

• different meausirng modes (multiple measurements and con-tinuous measurements, sequence mode, measuring groups, etc.)

• on-going updated statistics of the gloss values (average, standard deviation, max, min)

• simultaneously display of up to 3 geometries as well as up to 3 statistical values

• long-lasting LED

• multi-language menu-guidance

• supplied in a handy carrying case for protection during storage and transportation

geometry triple angle 20°, 60°, 85°

gloss range 0 - 2‘000 GU

measuring period per geometry 0.5 s

repeatability 0-199.9 GU: 0.1 GU, 200-2‘000 GU: 0.2%

reproducibility 0-199.9 GU: 0.5 GU, 200-2‘000 GU: 0.4%

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG Creasy


CREASY – the new optical measurement device to control creasing and folding quality in the box forming process

The Cardboard Box. Cardboard is made up from bonded layers providing the material with stiffness enabling it to protect the goods properly and able to give the box a high quality finish
Because of its stiffness folding the cardboard will result in cracks and splitting on the outside of the box. To avoid cracks the stiffness of the cardboard is reduced along a defined line creating a bending crease, this is created with a crease rule pressing into a crease channel. The fibre-fibre bonds between the inner plies are broken. This causes the material itself to be delaminated and deformed showing a crease on the outer side of the box and a bead at the inner side. The bending stiffness now along the crease is significantly reduced and the crease behaves like a hinge.

Image 1: Creasing process proper tool to control the creasing process.
In order to have full control about the creasing process, PERET has developed the CREASY, a hand held camera based measurement device. With a single key stroke the device calculates the dimensions and shape parameters of the Crease or Bead. The measured values can be collected in a statistics and reports can be created in PDF format.
CREASY is the tool to control the creasing process properly

Image 2: CREASY Converting Creasing Analyzer
Why is it important to analyze and control the crease and bead process and what can happen during creasing?
Before the CREASY was produced problems could only be detected after the boxes were formed and even sometimes only after the goods were already packed inside the boxes. As the box edges are stressed during packaging and transportation a high quality edge is a vital criterion for a quality box, most problems however can be predicted by analyzing the bead or crease and enabling the correction of the settings of the embosser.
Initially the card is folded to an angle between 90° and 180°, the bead rises up and the de-lamination of the inner layers takes place. On both ends of the bead there will be a folding point. In some cases the bead will not have been formed properly during the creasing either due to a partial de-lamination or the formation of an overlarge bead, this will result in extreme tension stress on the outside of the box, the consequence being cracks or splitting and the box becomes waste. The symmetry of the bead is also an important characteristic. Non symmetric creasing will obviously lead to non symmetric boxes and to run problems on the packaging line, and finally a low quality product both visually and in performance.

Image 3: Optimal Ruling

Image 4: Dimensions of rulings which are not optimal
There are different sources for the problems in the creasing process. Even if settings are accurate with the creasing rule and creasing channel, there are abrasions to the cutting knives taking place. The operator typically changes the settings of the penetrating depth of the knife without realising the effects of the impact. This impact will lead to higher shear stress at the channel and reduce the life time of the tools.

Image 5: Wear on the creasing knife
Next there is the problems of bad register, rule – channel misalignment, tool-tool misalignment, crease rule dish or incorrect laser die-board cutting can be the source of a poorly formed or an asymmetric bead

Image 6: The effect of bad alignment on the crease forming process
Using the CREASY you can measure:-
1. Critical dimensions and the symmetry of the crease before the pre-break and after the pre-break to optimize the settings of your embosser.
2. Check the creasing during the run of the press to predict quality problems in time.
3. Calculate the job statistics at the end of the job.

The CREASY also supports the quality control of the finished box. This can be done by adding the angle support accessory, which comes with the device.

Image 7: Measuring the finished box with CREASY

More information:
FAG GRAPHIC SYSTEMS SA, CH-1003 Lausanne
www.fag.ch

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG VIPCAM 122

This CTP-mesuring device guarantees accurate and quick quality control of computer to plate technologies and traditional prepress processes. With its built-in video camera it reads and analyses geometrically the dot area of each field with conventional or stochastic screening. It is also capable of measuring the dot diameter, screen angle and ruling, as well as the logarithmic visual area.

VIPCAM 122 BASIC: For polyester and standard plates (excl. film and paper)

VIPCAM 122 ADVANCED: For all plates, prints and films

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG PIT

Fascinatingly practical, versatile, easy to use and inexpensive: the digital “pocket microscope” FAG PIT from FAG Graphic Systems of Switzerland. PIT stands for PRINT IMAGE TOOL.It doesn’t have an eyepiece so you don’t look into it. Instead, the FAG PIT connects to your desktop computer or laptop through its USB port. After installing the software the user has a digital microscope with a zoom factor of up to 140x. The image recorded by a built-in camera is shown immediately on the computer screen. And this image can be measured, stored, printed out and emailed. Recorded facts put an end to discussions that always arise due to subjective perception and lead to disagreements.What print experts up till now could not do with the means at their disposal is now child’s play.

More Less

Product category: Test printing devices (also see Laboratory printing devices)

FAG BREYE

For the DRUPA 20126 the NEW BREYE version 2 analyzes characteristics of the Braille dot, the image providing a visual interpretation whilst the software measures height, base diameter and distances between dots, at the same time collecting data and calculating statistics, which you can then save and print quality reports on the Braille.

The NEW BREYE Braille Dot Checker can be used to control the Braille in three areas: (1) On the press, (2) after gluing, (3) in the QA department.

The NEW BREYE device is very stable and mobile, providing the user with the option to also take it to meetings with their clients, to maybe discuss for instance the type of card to be used and or the Braille height, all of course making costing and therefore your profit margin correct. Clients can then see the effect of each type of card on the monitor as reference images can be stored, and later reloaded in case of complains or adjustments.

More Less

Product category: Spectrophotometers

eXact

X-Rite eXact is the next generation handheld color measurement solution that takes into account the new business needs and dynamics of a global supply chain.

The first instrument in the industry that combines unique hardware and software into a single integrated scalable solution that offers:

Intuitive color touch-screen display that simplifies device operation
Product configurations that scale to meet business needs
Color pass/fail reporting against industry standards, including ISO, Japan Color, G7 and PSO.
Embedded Pantone Libraries for Access to industry-leading color reference standards
BestMatch offers press operators a fast and easy way to get a close match to your reference color by adjusting the density.

More Less

About us

Company details

FAG, the well-known supplier of the largest selection of quality control systems is proud to present its complete range of FAG measuring units.

As highlight FAG is proud to announce that a new range of FAG measuring units is now available on the market, the first unit is called FAG CREASY with the E (Embossing) GUIDE PRO and its new 3D dedicated visualization software

In order to avoid imitation and counterfeiting no visible inks reflection to the ultraviolets are used. The FAG FLUO allows these controls and checks these elements

The FAG FLEX³ PRO is now the reference in the flexo field, its software has now new functions to compare Dot on the plate and Dot on the printed result, to make statistics, etc…..

The FAG specialists hope to have the chance to meet you and give you any information you might need ! You will also discover some new novelties !


Seeing you on our stand no. 9C40 !

More Less

Company data

Sales volume

1-9 Mio US $

Export content

> 75%

Number of employees

1-19

Foundation

1937

Area of business
  • prepress / print
  • premedia/ mulitchannel
  • postpress/ converting/ packaging