La Meccanica Fumagalli S.r.l.

Via Lavoratori Autobianchi Lotto 1 b, 20832 Desio
Italy
Telephone +39 0362 303542
Fax +39 0362 302692
info@lameccfumagalli.com

Location

Hall map

drupa 2016 hall map (Hall 11): stand D35

Fairground map

drupa 2016 fairground map: Hall 11

Our range of products

Product categories

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.045  Cash register roll making machines

Cash register roll making machines

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.090  Reel slitting and rewinding machines

Reel slitting and rewinding machines

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.165  Tube cutting and winding machines

Tube cutting and winding machines

Our products

Product category: Cash register roll making machines

TRR

Slittier rewinding machine fully automatic with robot for cash register rolls model "TRR"

Slitting rewinding machine fully automatic to produce cash register rolls, charts rolls, lottery tickets rolls. This automatic machine is recommended for big productions capacity as no operator work and assistance is involved; the machine cycle consisting in automatic cross cut, glue and closure of loose tails and tuck in over the cores; positioning and traslation of the rewinding shafts from core loader station up to ejection of rolls on a roll breaker and press machine is controlled by a robot sistem.
The productivity of this slitter rewinder is 1200 cycles in 8 hours with finished rolls 40 meter long and it is included the time required to replace the mother rolls.
The change of the setting of the cutting width takes about 25 minutes.
The winding system is by surface drums and the tension control is very accurate controlled by a pneumatic disk brake and loadcell with microprocessor.
The machine is equipped by inverter motor, electronic programmable microprocessor unit for cycling, meter counter to set length of warning stripes slow-down speed final stop, including number of cycle setting, cycle counter for shift, meter counter total for mill roll control.
The circular slitting knives with spacers multisizes provides shear clean cut with pneumatic ON/OFF movement of all the shaft.
The machine can be provided with flexographic station for printing in line up to 2 colours with registration.

WORKING WIDTH: 1100 - 1600
UNWIND DIAMETER: 1250
REWIND DIAMETER: 120
SPEED: 400 mt/min

More Less

Product category: Cash register roll making machines

TRL-AT

Automatic tuck in slitter rewinder for cash register roll

Slitting rewinding machine to produce cash register rolls, multiplies rolls,
fax rolls, charts rolls, lottery tickets rolls. This automatic machine is recommended
for small, medium and big production capacity as the setting
for different width and diameter is very easy and fast. The automatic sequence
to descend top rider pressor roll, tuck-in of the paper over the
cores,start up motor, warning stripes mark activation, deceleration and
final stop does not require operator attention that during this part of the
cycle can discharge the finished rolls and prepare the new rewinding
shaft with cores for next cycle.
The automatic tucker givrs you 20% more in production than machine with manual tucker.
The number of the cycles in 8 hours is 720 for finished rolls 40 mt lenght including time to change mother rolls.
The winding system is by surface drums
and the tension control is very accurate controlled by a pneumatic disk
brake. The machine is equipped by inverter motor, electronic metre counter
to set length of warning stripes slow-down speed final stop, circular
slitting knives with spacers multisizes. The machine can be provided with
extra unwind stations to produce 2 and 3 copy rolls, flexographic station
for printing in line up to 2 colours with registration, accumulator for non-stop printing and accessories machines
to speed up production as automatic core loader, roll breaker and
flattening machines, shrink wrapping machine for packaging.
WORKING WIDTH: 800/1100 (multiplies)- 1350 (one ply)
UNWIND DIAMETER: 1000 (multiplies) – 1250 (one ply)
REWIND DIAMETER: 320
SPEED: 350 mt/min

More Less

Product category: Cash register roll making machines

TRL

Semiautomatic machine with manual tuck-in

Slitting rewinding machine to produce cash register rolls, multiplies rolls, fax rolls, charts rolls, lottery tickets rolls. This semiautomatic machine is recommended for small and medium productions capacity as the setting for different widht and diameter is very easy and fast.
The number of the cycles in 8 hours is 600 for finished rolls 40 mt lenght including time to change mother rolls.
The winding system is by surface drums and the tension control is very accurate controlled by a pneumatic disk brake. The machine is equipped by Inverter Motor , electronic metre counter to set length of warning stripes slow-down speed final stop , circular slitting knives with spacers multisizes. The machine can be provided with extra unwind stations to produce 2 and 3 copy rolls, flexographic station for printing in line up to 2 colours with registration and accessories machines to speed up production as automatic core loader, automatic and manual roll breaker and flattening machine ,shrink wrapping machines for packaging.

WORKING WIDTH: 800/1100 (multiplies) - 1350/1550 (one ply)
UNWIND DIAMETER: 1000 (multiplies) - 1250 (one ply)
REWIND DIAMETER: 320
SPEED: 300 mt/min

More Less

About us

Company details

LA MECCANICA FUMAGALLI SRL was founded in 1947 and since that time is involved into the manufacture of paper converting machines and specialized in semiatutomatic and automatic lines to produce cash register rolls, multiply rolls, fax simile rolls. Also in our production range are included slitting rewinding machines for paper and board of big diameter and core tube spiral winding machines and core tubes recutters for mill rolls cores, tapes cores or textile tubes. The frames of all our machines are milled in our Factory where also assembling and final test is done before shipment. Our Engineers under customer request provide installation, commissioning and instruction of operator on delivery place.

More Less