Packaging & Labels Books & Catalogues Newspaper, Magazines & Corporate Communication Customized & Individualized Printing (incl. Security & Brand Protection)

DIENES Werke für Maschinenteile GmbH & Co. KG

Postfach 1320, 51484 Overath
Kölner Str. 7, 51491 Overath
Germany
Telephone +49 2206 6050
Fax +49 2206 605111
sales@dienes.de

Location

Hall map

drupa 2016 hall map (Hall 11): stand B60

Fairground map

drupa 2016 fairground map: Hall 11

Our range of products

Product categories

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.030  Slitters and cross cutters

Slitters and cross cutters

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.405  Creasing, scoring, slitting and cross cutting machines (combined)

Creasing, scoring, slitting and cross cutting machines (combined)

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.415  Perforating machines, perforating devices, perforating tools

Perforating machines, perforating devices, perforating tools

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.085  Slitters and cross cutters

Slitters and cross cutters

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.160  Tube slicing and dividing machines

Tube slicing and dividing machines

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.175  Circular shears

Circular shears

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.220  Reel slitters, inline

Reel slitters, inline

  • 06  equipment/services/infrastructure
  • 06.03  Knives & grinding machines

Knives & grinding machines

  • 06  equipment/services/infrastructure
  • 06.19  Infrastructure
  • 06.19.065  Dust extraction systems

Dust extraction systems

Our products

Product category: Slitters and cross cutters

Bottom knives

Applying. All round view.

Bottom knives Are available as

UN-BS (plain bore / cutting on both sides)
UN-BS-HM (plain bore / tungsten carbide cutting edge on both sides)
UN-ES-HM (plain bore / tungsten carbide cutting edge on one side)

Standard thickness: 15 / 20 / 25 mm

Standard cutting angle: 3°

Typical application areas

aluminium foil
cable strap
plastics
paper
adhesive tape / labels
nonwoven
packaging
and many more

Benefits

highest slitting performance due to optimised surface quality
exact manufacturing tolerances
suitable for high slitting speeds
different bore pitch circles for the fitting of bottom knife motors
DIENES precision grinding "CONTROLLEUR"
designs with single or double-sided cutting edge arrangements
usable for different machine types
regrindable in manufacturer quality

More Less

Product category: Slitters and cross cutters

Vario Cut straight knife

Expand. Variability.
THE DIENES TWO-PIECE PAPER CUTTING KNIFE VARIO-CUT.

Innovative strength for professional slitting solutions has always been the forte of Dienes. With our new patent pending paper cutting knife VARIO-CUT, print shops and machine manufacturers benefit from a knife system which provides a whole range of advantages. Due to its unique, two-piece design, a broad selection of angles and grindings and an unrivalled low blade weight, this knife sets new standards in efficiency, variability and safety.

The new VARIO-CUT is a combination of blade and knife holder and compatible with all standard machines for guillotining - ideal for everyone wishing to optimise the quality and cost-effectiveness of their machines. The innovative, two-piece design of the inventor R. Rieder is in a class of its own - if a knife replacement is required for other material to be cut, the blade does not need to be positioned and aligned due to the fixed knife holder. The variable blade itself is available with various angles and grindings and can thus be flexibly adapted to the respective application. Due to optimised grinding and a 14.55 % lower blade thickness, the sliding friction could be reduced by 70 %, requiring significantly less force during cutting. The result: improved service life, easier cutting through thick material, less wear and more reasonable regrinding of the blade.

Above all, the remarkably low weight is an absolute novelty. Responsible for this is the separation of knife and holder as well as the tapering of the blade - the whole system of knife holder and blade weighs 23 kg, but the weight of the blade itself is a mere 10 kg. This corresponds to half the weight of conventional knives for guillotining, which are usually 20 kg heavier. The benefits are obvious: While a traditional knife replacement used to take up to 30 minutes, with VARIO-CUT a replacement of the blade is possible within just a few minutes by only one person. This not only means increased productivity and safety, but also longer service life of the knives, as the right blade is always used for the respective material due to the easy knife replacement. And despite minimal additional costs of the system, the bottom line is higher slitting quality, better cost-effectiveness and a faster return of invest. Another benefit: Due to the easy knife replacement, the blade can also be cleaned outside of the machine. Incidentally, the new paper cutting knife VARIO-CUT is also highly efficient with regard to repeat orders. The knife has a QR code, which forwards to our online service page, providing information on angles, grindings, spare parts, order numbers and documentations, and direct access is provided to the time- and cost-saving DIENES regrinding service.

More Less

Product category: Knives & grinding machines

Razor Blade Knife Holder

Getting. Grip.
Pneumatic Razor Blade Knife Holder
PSGs DF with razor blade knife head

Range of application

plastic foil
film
textiles
nonwoven
aluminium foil

Benefits

fast exchange of blunt blades without interrupting the cutting process
short set-up times due to blade carriers that can be replaced by touching a button
long service life
high flexibility due to narrow slit width
high user friedliness due to 360° hand guard
suitable for high slitting speeds
reduction of melting of the cutting edge by reducing the frictional heat
high stability due to double guidance

More Less

About us

Company data

Sales volume

50-99 Mio US $

Export content

max. 50%

Number of employees

100-499

Foundation

1913

Area of business

equipment/ services/ infrastructure