Elmag S.P.A. Superfici Division

Via Raffaello Sanzio, 9, 20852 Villasanta (MB)
Telephone +39 039 23611
Fax +39 039 328202


Hall map

drupa 2016 hall map (Hall 3): stand B12

Fairground map

drupa 2016 fairground map: Hall 3

Our range of products

Product categories

  • 01  prepress/print
  • 01.15  Printing machines and systems for special printing applications
  • 01.15.090  Coating machines

Coating machines

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.250  Dryers
  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.265  IR/dry air dryers, IR/hot air dryers

IR/dry air dryers, IR/hot air dryers

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.270  IR dryers, infrared dryers

IR dryers, infrared dryers

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.290  UV dryers

Our products

Product category: Dryers

jet air blade dryer

JET AIR BLADE DRYER The air blade dryer is a flat dryer working with hot air at high speed. Recycling ventilation system with high performance centrifugal fan which conveys air into a special design collecting hood allowing a uniform distribution with minimum losses to the air blades. Thanks to its high efficiency, the dryer is normally used for fast flash off cycles or for the drying of water-borne lacquers or stains. The dryer can eventually also be equipped with infrared lamps placed in-between the blades to accelerate the drying process

More Less

Product category: IR/dry air dryers, IR/hot air dryers

FAST DRY - Infrared and hot air drying

When talking about offset machines, today’s high capacity requirements oblige to achieve the drying of inks and traditional lacquers directly on the machines.
The ink drying process implies two main equally important aspects.
The first main issue is the evaporation of the dilution products, the second one is the chemical reaction, which takes place as an oxidation of the pigments.
The choice of the dryer is determined by the composition of the inks and of the lacquers to be used.
Products not containing any water can be simply dried by an infrared dryer, while water-borne inks need some hot air in addition to the IR irradiation.
The short wave infrared dryer fast dry is equipped with an automatic switching on device for the lamps, which are activated by the sheets passing through. The system can also be partially switched on in case smaller formats are processed.
In this case the side lamps are switched off according to the paper sheet format, thus achieving a relevant energy saving.
The hot air dryer Fastdry is equipped with a heating coil, which feeds the air blades.
Both the air temperature and the air speed are adjustable to avoid turbulences and over-heating especially in case of very light sheets.

Both dryers are controlled by a user friendly touch panel.

More Less

Product category: UV dryers


The ordinary ultraviolet sources produce a string infrared radiation that may cause a relevant overheating of the irradiated substrates. Thanks to a refined device developed by Superfici, it is possible to filter the emitted radiation taking away all the infrared portion. The result is a cold ultraviolet light which can be used with any kind of thermo-sensitive material. The above mentioned Coldcure system combined with the development of a special UV-PLUS module achieves the possibility of positioning the reflector in three different positions: 1. Direct irradiation – on the surface to be cured. 2. Coldcure position – to achieve a “cold” polymerisation. 3. Stand-by position – in case of conveyor stop with lamp power supply cut to 50%.

More Less

Our trade marks

About us

Company details

Elmag-Superfici, a company that has served for decades as a supplier in the field of the design, development and manufacture of complete industrial finishing systems, is the market leader in its sector.
Originating in equipment for wood finishing, over the years Elmag-Superfici has expanded its expertise into the production of coating systems for glass, plastic, graphic arts, metals, and composite materials.
The product range includes complete automated or robotic spraying lines with vertical and / or linear dryers and optional UV curing, complete lines for roller coating and curtain coating, printing lines for panels; and finishing systems for windows and other three-dimensional pieces.

The main production facility, located in Monza, Italy, ensures maximum efficiency and high production standards in order to maintain high international competitiveness.
Having always been oriented towards international markets, Superfici exports all over the world, relying on direct branches and competent dealers and agents, with whom it has established long-standing relationships of cooperation and mutual respect.

More Less