Ink key presetting system for all printing machines
LithoCIP allows offset printing machines to integrate ink key presetting. Based on digital job data, CIP3, PDF and TIFF files, the LithoCIP system identifies the optimium ink presetting values for all printing units. The automatic adjustment of all inking units before the first hard-proof significantly enhanes the productivity.
Presetting of all Ral and of all Euro and special colours
Product category: Colour measurement and control systems
Basics of Dynamic Control
All conventional offset printing units will need from 70 to 800 sheets – depending on area coverage – until they reach a stable coloration Reaching the right coloring can be speeded up significantly by special control procedures for the ink keys / slides The correct calculation and execution of the dynamic control parameters for all ink keys and printing units is essential for that The optimised balance between ink key opening, ductor sweep and vibrator ratio is important as well
Scope of Application
Retrofit equipment for print shops with the wish to save make ready and printing costs Optional for Densitronic Professional / Basic, LithoScan Professional / Basic
Significant time reduction of pre-setting and control procedures Up to 50% less waste due to faster make ready
Product category: Measuring/scanning tables for colour charts and printed sheets
"LithoScan Professional" is a measurement system to check the printing quality online, which not only measures the [LithoScan prof. / Densitronic S / Densitronic prof.] density in color bars, but also can measure spectral and colormetrical values within the sujet. Deviations in the color bar and in the sujet will be recignised and - if possible - corrected before they cause problems. In addition the printer can check whether pre press supplied plates with correct curves.
With these features the LithoScan Professional helps to maintain quality and builds a bridge between pre press and printing press.
The system is sold by KBA named "Densitronic S", respectively "Densitronic professional", as well as by manroland as "LithoScan Professional".
LithoScan Professional is the only system worldwide with a combinated sensor to measure densitometricaly and spectraly using only one apperture. The software holds the longest experience with sujet related spectral measurement technology at printing presses.
Spectral inline measurement and control system in web offset printing and special applications
LithoSpectral Web inline enables the spectral measurement and colour control of printed products especially in web offset printing. Measurement is performaned in print control strips pr at appropriate positions in the printed image. The system can achieve considerable savings in a short time. Reduced setting time increases job throughput. High waste savings directly lower substrate costs. The use of a measurement and control system additionally ensures production quality both through density and Lab control.
Measurement and control of Lab values and the densities of process inks and special colours
For web offset printing machines with a production width of 52 - 205 cm
Monitoring of tone value increase, print contrast, trapping, delta-E and contamination parameters
Inline measurement and control system for offset printing
The use of LithoFlash Inline systems can sustainably improve the productivity of your existing or new printing machines. With small investment volume, this kind of systems achieve significant savings in a short time. Reduced setting time inceases job throughput. High waste savings directly lower substrate costs. Moreover, the use of a measurement and control system additionally ensures production quality.
For sheet-fed and web offset printing machines with a production width of 52-205 cm
Measurement and control of the densities of process inks and special colours
Monitoring of tone value increase, print contrast and trapping parameters