Packaging & Labels

BOGRAMA AG, Bochsler Grafische Maschinen

Postfach 24, 8488 Turbenthal
Mettlenstr. 1, 8488 Turbenthal
Switzerland
Telephone +41 52 3962770
Fax +41 52 3962777
info@bograma.ch

Location

Hall map

drupa 2016 hall map (Hall 6): stand B38

Fairground map

drupa 2016 fairground map: Hall 6

Contact

Iwan Bochsler

Mettlenstraße 1
8488 turbenthal, Switzerland

Phone
+41-52 3 96 27 70

Fax
+41-52 3 96 27 77

Email
iwan.bochsler@bograma.ch

Our range of products

Product categories

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.350  Die-cutting machines

Die-cutting machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.355  Flatbed die-cutting machines

Flatbed die-cutting machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.360  Piston operated stamping machines

Piston operated stamping machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.370  Rotary die-cutting machines

Rotary die-cutting machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.375  Automatic die-cutters

Automatic die-cutters

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.130  Fold gluing machines

Fold gluing machines

  • 03  postpress/converting/packaging
  • 03.03  finishing
  • 03.03.050  Label die-cutting machines

Label die-cutting machines

  • 06  equipment/services/infrastructure
  • 06.01  Peripheral equipment
  • 06.01.045  Sheet feeders, layboys, sheet deliveries

Sheet feeders, layboys, sheet deliveries

Our products

Product category: Sheet feeders, layboys, sheet deliveries

Feeder TA 15 / TA 20

BOGRAMA Feeder TA 15

Height-adjustable drum feeder with low feed height for comfortable working.

The large feed drum guarantees that products are not damaged whilst being processed. Two pairs of grabs to pull off two sheets in one revolution of the drum.

With a capacity of up to 15,000 cycles/h for products (brochures, folded sheets, etc.) with a thickness up to 5mm.

BOGRAMA Feeder TA 20

High-performance drum feeder with low feed height for comfortable working.

With a capacity of up to 20,000 cycles/h, the TA 20 is also deployed for the small folds of rotary printing sheets.

More Less

Product category: Piston operated stamping machines

Punch machine BS MULTI

Automatic cut, punch, hole-punch and perforation machines for inline or singel function.

To attach inline to a saddle stitcher, folding machine or a single feeder.

Booklets, advertising supplements, instruction manuals, package inserts, and diaries are characteristic products which may be produced on a Bograma punch machine in single or multiple up.

BSM 450 / 750 Servo

The punch machines BS Multi 450 / 750 Servo are by far the two most sold and universal models amongst the BOGRAMA punch machines in the middle capacity range of up to 10.500 cycles/h.

BSM 450 / 750 Servo plus

In order to use the punch machines BS MULTI even more efficiently, the model Servo plus is equiped with a high-powered servodrive. Its capacity can increase up to 12.500 cycles/h.

More Less

Product category: Rotary die-cutting machines

BS ROTARY 550 Servo

The BOGRAMA BSR 550 Servo Rotary die-cutter has been developed for single-sheet processing and for thin, folded products, e.g. 4 or 6-page folded leaflets.

The BSR 550 Servo is ideal for job printing, as well as for pharma, package, label and digital printing.

Mailings, advertising supplements, booklet labels, folders, greeting cards, folded boxes and labels are a few examples of products that can be manufactured, one or multiple-up, on the Rotary die-cutter.

With the corresponding flexible dies, the BSR 550 Servo can punch, kiss cut, perforate, crease and deboss.

The BSR 550 Servo is a compact, mobile punch machine, requiring little space and weighting approx. 2.2 tons.

The machine runs smoothly without dynamic forces / weight acting on the ground.

A maximum product thickness of 0.5 mm can be punched; the paper thickness should be at least 80 g/m2.

Formats can be processed between A4 and a maximum of 550 x 750 mm.

The maximum production capacity of the BSR 550 Servo (depending on material) is at 12,000 cycles / h.

Inline configuration of the die-cutter is naturally the most efficient way to accomplish several work steps in one single step, thus achieving high performance.

Automatic discharge of the section grids while at the same time breaking out the inner cuts optimizes production even further.

More Less

Product category: Sheet feeders, layboys, sheet deliveries

SAB 550 Stream delivery

The BOGRAMA SAB 550 / 750 stream delivery is used for multiple-up production. Formats from A3 to 30 x 30 mm (minimum) can therefore be delivered in streams.


• Round belt infeed for optimised product delivery
• Powered top belts with size-independent stream belt
• Preselection and total counters
• Motorised height adjustment

Available in two working widths, optionally with stream belt extension to 2 meters

More Less

Product category: Rotary die-cutting machines

BS ROTARY 550 basic

Short setup times, simple control guidance, economic and cost-effective productions.

With the market introduction of the BSR 550 basic BOGRAMA expanded its range of machines by another Rotary die-cutter.

The BSR 550 basic is, as the name indicates, reduced to the essential basis of the BSR 550 Servo, which has already been established on the market for five years.

The capacity of the BSR 550 basic is up to 8000 cycles/h with a maximum sheet size of 550 x 750 mm.

The compact and attractively priced system is structured as an offline solution. It is designed specifically for users who want to produce small and medium runs economically and efficiently as well as for those for which the flexible connection options and technical features of the BSR 550 Servo have no priority.

The BSR 550 basic is suitable for die-cutting, kiss-cutting, creasing and perforating of various products such as packaging, labels, mailings, presentation folders, etc. - both from the offset, as well as from the digital printing.

More Less

About us

Company details

Based in Turbenthal in Switzerland, BOGRAMA has been specialising for 15 years on the development and construction of die-cutters, punch machines and additional units for subsequent print finishing.

The core competence of BOGRAMA is die-cutting.

The product range includes:

NEW! Rotary die-cutter BSR 550 basic
Short setup times, simple control guidance, economic and cost-effective productions.
With the market introduction of the BSR 550 basic BOGRAMA expanded its range of machines by another Rotary die-cutter.
The compact and attractively priced system is structured as an offline. It is designed specifically for users who want to produce small and medium runs economically and efficiently as well as for those for which the flexible connection options and technical features of the BSR 550 Servo have no priority.

BSR 550 Servo Rotary die-cutter the innovative die-cut system for the inline or offline processing of single sheets or thin folded products.

The Rotary die-cutters of BOGRAMA are well suited for the creative subsequent finishing of printed material from the job printing, pharmaceutical, packaging, label and digital print sectors.
For the production of mailings, advertising supplements, booklet labels, folders, greeting cards, folded boxes and labels in one-up or multiple-up mode.

BS MULTI 450/750 Servo Punch machine for the inline or offline processing of folded, stitched or perfect bound booklets, advertising supplements, instruction manuals, package inserts and calendars in one-up or multiple-up mode.

Feeder and Delivery systems

From professionals for professionals, BOGRAMA develops and builds machines that are setting benchmarks within the industry. The expertise BOGRAMA has gained over years enables the company to leverage its winning products and BOGRAMA quality to face up to the challenges the market presents.

BOGRAMA AG
Bochsler Grafische Maschinen
Mettlenstrasse 1
CH-8488 Turbenthal
Tel.: +41 52 396 27 70
Email: info@bograma.ch

More Less

Company data

Sales volume

1-9 Mio US $

Export content

> 75%

Number of employees

20-49

Foundation

1986

Area of business

postpress/ converting/ packaging