Packaging & Labels

Shanghai Eternal Machinery Co., Ltd

T1/13A-B, Gateway Plaza, No. 2601, Xietu, 200030 Shanghai
China
Telephone +86 21 64262538, +86 155 02112055
Fax +86 21 64262153
export@eterna-shanghai.com

This company is main exhibitor of

Location

Hall map

drupa 2016 hall map (Hall 10): stand D36

Fairground map

drupa 2016 fairground map: Hall 10

Our range of products

Product categories

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.340  Foil stamping machines

Foil stamping machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.355  Flatbed die-cutting machines

Flatbed die-cutting machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.375  Automatic die-cutters
  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.130  Fold gluing machines

Fold gluing machines

  • 03  postpress/converting/packaging
  • 03.02  converting
  • 03.02.200  Box making machines

Box making machines

Our products

Product category: Foil stamping machines

BRAUSSE 1050SEF


Feeder

Patent turbo spiral air blower pressing foot at feeder head

Four pick up and four forward suck heads with angle adjustment

Preloading device with rail cart and scaled gate

Non – stop feeder with automatic pile lift

Left and right side turbo air blower

Motorized side adjustment of pallet table

Electrical double sheet control

Fine air blast at lead edge for smooth thin paper transport

Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays with selective on/off switch

Synchronizing device to adjust the sheet positioning to the front lay by hand during production

Bullet catcher on the feeder entrance

Side lays on both sides push and pull convertible

Electronic side lay control to check the sheet position

Four individually adjustable front lays with dial read out at the operation side of the machine

Two electronic front lay controls by means of Omron Glasfiber optik to control the sheet arrival

Photo sensor safety barrier at pallet table floor lever touching point

Die cutting Section

Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement

Precision stationery upper platen

Sandwich hardened cutting plate

Pneumatic push button diechase locking mechanism to ensure safe and operator friendly changing of the die

Pneumatic clutch/brake for main drive system

Servo motor drive automatic impression on/off

Digital diecutting pressure tonnage display with maximum pressure limit protection

Seven high precision alloy gripper bar

High quality pre – stretched gripper bar driving chain

State – of – art 3 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement

Torque limit safety clutch to protect the index driving system in case of gripper bar crash

Double cam driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off

Air blasting nozzle bar for stretching the thin paper before die cutting

Stripping Section

Triple action movement of the upper and lower stripping frames with lower spring loaded stripping pins

Motorized upper frame suspending hoister

Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready

Remote control operation panel for jogging the upper frame up and down, easy and safe stripping tool set up and alignment

Quick stripping tool exchange device (optional)

Mechanical disconnecting of lower stripping frame when it is not in use

Delivery Section

Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange

Five section brush brake each section angle adjustable individually

Air blower to press down the sheets

Rare and side joggers with easy position adjustment

Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side

Tape inserter with counter

Safety device to prevent the steel pile plate from clamping on the foot when it reaches at ground level

 

More Less

Product category: Automatic die-cutters

BRAUSSE 1050SE(H)


Feeder

Patent turbo spiral air blower pressing foot at feeder head

Four pick up and four forward suck heads with angle adjustment

Preloading device with rail cart and scaled gate

Non – stop feeder with automatic pile lift

Left and right side turbo air blower

Motorized side adjustment of pallet table

Electrical double sheet control

Fine air blast at lead edge for smooth thin paper transport

Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays with selective on/off switch

Synchronizing device to adjust the sheet positioning to the front lay by hand during production

Bullet catcher on the feeder entrance

Side lays on both sides push and pull convertible

Electronic side lay control to check the sheet position

Four individually adjustable front lays with dial read out at the operation side of the machine

Two electronic front lay controls by means of Omron Glasfiber optik to control the sheet arrival

Photo sensor safety barrier at pallet table floor level touching point

Die cutting Section

Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement

Precision stationery upper platen

Sandwich hardened cutting plate

Pneumatic push button diechase locking mechanism to ensure safe and operator friendly changing of the die

Pneumatic clutch/brake for main drive system

Servo motor drive impression on/off by button

Digital diecutting pressure tonnage display with maximum pressure limit protection

Seven high precision alloy gripper bar

High quality pre – stretched gripper bar driving chain

State – of – art 3 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement

Torque limit safety clutch to protect the index driving system in case of gripper bar crash

Double cam driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off

Air blasting nozzle bar for stretching the thin paper before die cutting

Stripping Section

Triple action movement of the upper and lower stripping frames with lower spring loaded stripping pins

Motorized upper frame suspending hoister

Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready

Remote control operation panel for jogging the upper frame up and down, easy and safe stripping tool set up and alignment

Quick stripping tool exchange device (optional)

Mechanical disconnecting of lower stripping frame when it is not in use

Delivery Section

Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange

Five section brush brake each section angle adjustable individually

Air blower to press down the sheets

Rare and side joggers with easy position adjustment

Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side

Tape inserter with counter

Safety device to prevent the steel pile plate from clamping on the foot when it reaches at ground level

 

More Less

Product category: Automatic die-cutters

PE1620S(H)L-Extra

Automatic Diecutting & Creasing Machine with Servo Drive Extended Long Feeder


FEEDER

Non-stop “ L” type bottom feeding system with extended long feeding table and side lay

Pneumatic side push guide plate (right side only)

Motorized feeding roller

Paper hold down pressing plate and front lay with double sheet detector

Vacuum/blow pump

Slow down device at front lay for gentle and precise sheet front edge registration
FRONT LAY WITH SLOW DOWN AND SIDE REGISTER LAY PUSH

Sheet arrives at front lay with servo motor controlled slow down action for precise registration

Both left and right side push lay to ensure the accuracy of side register

Advanced non-stop adjustment of feeding timing

DIECUTTING SECTION

Crank and worm gear, toggle drive system for the lower platen

The mobile platen stroke is increased from 71mm to 95mm for handling corrugated board (especially AB Flute) smoother

Stationary high precision upper platen

Safety door and diechase safety locking system

High torque pneumatic clutch/break for positive clutch on and reliable breaking, and special air inlet system to control the air volume for smooth machine start and stop

Air cushion underneath the cutting plate for easy cutting plate in and out

Gear main drive

Overloading protection torque limit clutch

State-of-the-art 3 cam index gripper chain drive

Center line system compatible to Center Line II, makes the cutting die and stripping die centered quickly

8 high quality precision alloy gripper bars, each with 12 special hardened grippers to ensure firm grab of the sheet at high speed

Sheet arrival and departure check photo sensor

Left and right front lay locking blocks, separating and synchronizing adjustment available

Chain guide rail use VL compound to improve abrasive resistance and seismic resistance

Self-diagnostic trouble display

Digital speed display

Automatic recycling lubrication system with oil pressure gauge and oil pressure switch

Automatic main gripper drive chain lubrication

STRIPPING SECTION

Centerline system (compatible to Centerline II)

400mm upper stripping frame raiser enhances greatly the operation space, more operator friendly

Motorized upper frame suspending hoister

Lead edge waste removal system

Centerline system for quick stripping die set up

DELIVERY

Escalator delivery fork with non-stop air cylinder for neat and positive delivery and conveyor belt delivery table to protect the sheets from scratches

Bundle delivery with pre-set counter requesting only one sheet interval in non-stop operation at 4500S/H production speed

The bundle delivery table can be prepared for future connection with breaker for in line operation (to be required at order)

Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation

Spring loaded adjustable chain tension back buffering wheel to maintain the chain tension constant and smooth gripper bar movement

Electronic batch counter

 

More Less

About us

Company details

Shanghai Eternal Machinery Co., Ltd. is a solely foreign-owned company which is specialized in manufacturing automatic/semi-automatic flat bed diecutting & creasing machine, foil stamping machine, folding & gluing machine, along with corrugated paper board peripheral equipment and stitching machine. Established in Shanghai in 1995, Shanghai Eternal Machinery Co., Ltd. is the pioneer in manufacturing large format automatic flat bed diecutting & creasing machine for corrugated industry in China.

Shanghai Eternal Machinery Co., Ltd. is made up of 13 segments: Operation Headquarter, Research & Development Centre (R&D), Production Management Centre (PMC), Financial Management Centre (FMC), Material Planning and Purchasing Management Centre (MPMC), Sales & Service Management Centre (SSMC), Human Resource Management Centre (HRMC), Import & Export Department, Eternal Factory (Specialized in manufacturing large format flat bed diecutting & creasing machine for corrugated board and other corrugated paper board peripheral equipment), Eterna Factory (Specialized in manufacturing flat bed diecutting & creasing machine for cardboard and foil stamping machine), Taeyong Eterna Factory (Specialized in manufacturing folding & gluing machine), Parts Machining Shop and EDF Europe S.R.L. In 2009, we have altogether 362 employees with 31 (8.6%) R & D engineers and boast an annual capacity of over 250 machines among which more than 50% are exported throughout the world. Over years of development, we have set up two modern facilities, including the one located in Shanghai Jiading Anting Automobile Industrial Park with 20,000 square meters, and now we are building the third modern plant. After its completion, we will have altogether 45,000 square meters’ plant area and have grown into an entity incorporating full line of research and development, manufacturing, assembling and pre-sale consultation, as well as post-sale service capability.

Hereunder are our main product line: Eterna PE1620SA ELITE Automatic Flat Bed Diecutting & Creasing Machine, Eterna PE1620SHL ACTION/PE1620SAL-Extra Automatic Flat Bed Diecutting & Creasing Machine with Extended Long Feeder, PE2100S Automatic Flat Bed Diecutting & Creasing Machine, SA1620S/SA2100S Hand-fed Semi-automatic Flat Bed Diecutting & Creasing Machine with Stripping Station.  Brausse 106CE/1050/PE1450SE series Automatic Flat Bed Diecutting & Creasing Machine, Foil Stamping Machine and Eterna/Brausse TA/TB series  Folding & Gluing Machine; TC Corrugate Folding & Gluing Macihne.

Our goal is to establish our complete chain of supply by utilizing the best technologies available today and independent R&D core technologies, in conjunction with superior and economical manufacturing and the sales and service network throughout the world. Our products represent the latest technology with the greatest economical value available today, which can meet not only the actual needs of the domestic market but also in line with the international standards. We are committed to provide the best and overall solution to satisfy our customer in the packaging industry.

To be Best in class! This motto is coming into and will be well-known in the paper and package industry all over the world along with our products and services.

More Less