Gerhard Busch GmbH

Fully hydraulic. High cutting accuracy up to the last sheet.

Faster, more precise, more economical – these are the attributes Schneider Senator S-Line is known for. The patented direct-hydraulic drive concept sets new standards for the performance of cutting machines.

• cutting width:

         - S-Line 115H: 1150 mm

         - S-Line 137H: 1370 mm

         - S-Line 155H: 1550 mm (pic.)

• fully hydraulic drive
• computer-control with 15“ TFT-display
• solid cast iron frame
• infrared safety barriers
• rust-proof cutting table with air film and stainless steel surface, with blower
• automated knife change at the front (AKC) into a patented knife change cassette
• clamp pressure adjustment via display, programmable and controlled by proportional valve
• program correction function, linear and percentagewise
• optical cut indicator
• 2 knifes (HSS quality)
• 5 sinus cutting sticks
• slot cover
• clamp bar cover plate
• CE & EN 1010 conform
• options:

          - TrimmMaster (automatic waste removal)

          - swinging and/or tilting back gauge, program-controlled

          - downholder at the back gauge, program-controlled

          - lay edge control, program-controlled

          - retractable rear cover, electrically locked

          - retractable side gauge

• cutting width: 780 or 920 mm
• direct electromechanical knife drive
• hydraulic clamp bar
• rust-proof stainless steel side tables (without air film)
• one-piece rear table (without slot cover band)
• closed rear table cover
• manual clamp pressure adjustment
• 1 HSS knife

• cutting width: 780 or 920 mm
• direct electromechanical knife drive
• hydraulic clamp bar
• rust-proof stainless steel side tables with air film
• one-piece rear table (without slot cover band)
• hinged rear table cover
• proportional valve controlled clamp pressure adjustment
• program correction linear and in percentage terms
• Ethernet interface
• scaled swinging / tilting back gauge adjustment
• 2 HSS knives

• Air removal roller for forming precise blocks of reams
• Two different air removal pressures which can also be programmed individually via pneumatic proportional valve
• Stepless variable roller speed
• Intermediate air removal in jogging position is possible
• Pneumatic FESTO valve terminal technology
• Two pneumatic side flaps on the left and the right side
• Four different adjustable table inclinations to the left and the right side
• Solid welded underframe on a 20 mm base plate
• Air-blown, VA-grade stainless steel vibrating table surface
• Air film for easy transport of the reams
• Automatic, frequency controlled jogging mechanism
• Selectable rotation direction of jogger motor to the left or right (can also be switched during operation)
• Blower and electric switchboard mounted on underframe
• SIEMENS control S7 1200
• Optional sheet counting scale is available for exact and recurring determination of sheet quantity
• Maximum sheet format:

           - Model BR 87: 630 x 860 mm

           - Model BR 115: 800 x 1140 mm

           - Model BR 150: 1080 x 1480 mm

• Two pneumatic side flaps on the left and the right side
• Four different adjustable table inclinations to the left and the right side
• Solid welded underframe on a 20 mm base plate
• Air-blown, VA-grade stainless steel vibrating table surface
• Air film for easy transport of the reams
• Automatic, frequency controlled jogging mechanism
• Selectable rotation direction of jogger motor to the left or right (can also be switched during operation)
• Blower and electric switchboard mounted on underframe
• SIEMENS control S7 1200
• Optional sheet counting scale is available for exact and recurring determination of sheet quantity
• Maximum sheet format:

          - Model BR 87: 630 x 860 mm

          - Model BR 115: 800 x 1140 mm

          - Model BR 150: 1080 x 1480 mm

Fully hydraulic. High cutting accuracy up to the last sheet.

Faster, more precise, more economical – these are the attributes Schneider Senator S-Line is known for. The patented direct-hydraulic drive concept sets new standards for the performance of cutting machines.

• cutting width:

          - S-Line 115H: 1150 mm

          - S-Line 137H: 1370 mm

          - S-Line 155H: 1550 mm (pic.)

• fully hydraulic drive
• computer-control with 15“ TFT-display
• solid cast iron frame
• infrared safety barriers
• rust-proof cutting table with air film and stainless steel surface, with blower
• automated knife change at the front (AKC) into a patented knife change cassette
• clamp pressure adjustment via display, programmable and controlled by proportional valve
• program correction function, linear and percentagewise
• optical cut indicator
• 2 knifes (HSS quality)
• 5 sinus cutting sticks
• slot cover
• clamp bar cover plate
• CE & EN 1010 conform
• options:

          - TrimmMaster (automatic waste removal)

          - swinging and/or tilting back gauge, program-controlled

          - downholder at the back gauge, program-controlled

          - lay edge control, program-controlled

          - retractable rear cover, electrically locked

          - retractable side gauge

• cutting width: 780 or 920 mm
• direct electromechanical knife drive
• hydraulic clamp bar
• rust-proof stainless steel side tables (without air film)
• one-piece rear table (without slot cover band)
• closed rear table cover
• manual clamp pressure adjustment
• 1 HSS knife

• cutting width: 780 or 920 mm
• direct electromechanical knife drive
• hydraulic clamp bar
• rust-proof stainless steel side tables with air film
• one-piece rear table (without slot cover band)
• hinged rear table cover
• proportional valve controlled clamp pressure adjustment
• program correction linear and in percentage terms
• Ethernet interface
• scaled swinging / tilting back gauge adjustment
• 2 HSS knives

• Stable, welded design
• Automated hydraulic lifting and lowering mechanism (direct drive without lifting chains)
• Adjustable working height thanks to light sensor
• Operating arm can be fitted on the left or right
• Automated lifting and lowering mechanism can be switched over for unloading and de-stacking
• With optional pre-piling device for precise de-stacking (for easy retrofitting)
• Platform size: 1100 x 1550mm
• Load: 1500kg

• Stable, welded design
• Automated hydraulic lifting and lowering mechanism (direct drive without lifting chains)
• Adjustable working height thanks to light sensor
• Operating arm can be fitted on the left or right
• Automated lifting and lowering mechanism can be switched over for unloading and de-stacking
• With optional pre-piling device for precise de-stacking (for easy retrofitting)
• Platform size: 840 x 1250mm
• Load: 1000kg

• Stable, welded design
• Automated hydraulic lifting and lowering mechanism (direct drive without lifting chains)
• Adjustable working height thanks to light sensor
• Operating arm can be fitted on the left or right
• Automated lifting and lowering mechanism can be switched over for unloading and de-stacking
• With optional pre-piling device for precise de-stacking (for easy retrofitting)
• Platform size: 620 x 850mm
• Load: 500kg

• Stable, welded design
• Automated hydraulic lifting and lowering mechanism (direct drive without lifting chains)
• Adjustable working height thanks to light sensor
• Operating arm can be fitted on the left or right
• Automated lifting and lowering mechanism can be switched over for unloading and de-stacking
• With optional pre-piling device for precise de-stacking (for easy retrofitting)
• Platform size: 780 x 1100mm
• Load: 1000kg

• For large-sized products up to 330 x 380 mm
• Min. die-cut size: 80 x 100 mm; with counter-pressure 70 x 140 mm
• Activation of the cutting stroke: by electronic light barrier
• The machine is especially used with counter-pressure (see picture) for the production of inmould-labels made of plastic material (PP- or PE-foil).
• Without the counter-pressure unit, but equipped with a delivery tray instead, the machine works on punching products made of paper, board and PVC.

• For large sizes, with high punching power
• Activation of the cutting stroke: by electronic light barrier
• Max. die-cut size:

           - Model BL: 220 x 260 mm

           - Model BLS: 230 x 320 mm

• Min. die-cut size:

           - Model BL: 15 x 15 mm; with counter-pressure 30 x 30 mm

           - Model BLS: 20 x 20 mm; with counter-pressure 30 x 30 mm

• Both models can be operated with counter-pressure as well. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For smaller runs, especially for labels
• Max. die-cut size: 180 x 180 mm
• Min. die-cut size: 17 x 17 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

           - Model A: manual closure of the protective door (left pic.)

           - Model A+P: pneumatic closure of the protective door after pressing

              a push-button on the control panel (left pic.)

           - Model AL: by electronic light barrier (right pic. incl. counter-pressure unit)

• All models can also be operated with counter-pressure. This is helpful e.g. when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For larger cutting sizes with increased punching power
• Max. die-cut size: 230 x 230 mm
• Min. die-cut size: 10 x 10 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model B: manual closure of the protective door

          - Model B+P: pneumatic closure of the protective door after pressing a push-button on the control panel

• Both models can also be operated with counter-pressure. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

A label or a brochure with a complex and extraordinary shape demonstrably attracts the customer’s attention. In order to achieve a high-quality produced outer contour, a die-cut is recommended for almost simple forms with rounded or cut corners up to complicated fancy contours. The BUSCH die-cutting machine program offers suitable and flexible solutions for each individual requirement - for small, medium or large runs. It is noted for their safe operation, short set-up times and maintenance free operation.

Application range: labels, inmould labels, brochures, credit and service cards, plastic stickers, children's booklets, note pads (also with a sloping edge) and similar articles.

Material for die-cutting: paper, board and all related material, different plastics and plastic laminates, PP- or PE-foil, self-adhesive foil, tempered and varnished aluminium foil, etc.

• For large-sized products up to 330 x 380 mm
• Min. die-cut size: 80 x 100 mm; with counter-pressure 70 x 140 mm
• Activation of the cutting stroke: by electronic light barrier
• The machine is especially used with counter-pressure (see picture) for the production of inmould-labels made of plastic material (PP- or PE-foil). Without the counter-pressure unit, but equipped with a delivery tray instead, the machine works on punching products made of paper, board and PVC.

• For large sizes, with high punching power
• Activation of the cutting stroke: by electronic light barrier
• Max. die-cut size:

           - Model BL: 220 x 260 mm

           - Model BLS: 230 x 320 mm

• Min. die-cut size:

           - Model BL: 15 x 15 mm; with counter-pressure 30 x 30 mm

           - Model BLS: 20 x 20 mm; with counter-pressure 30 x 30 mm

• Both models can be operated with counter-pressure as well. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For larger cutting sizes with increased punching power
• Max. die-cut size: 230 x 230 mm
• Min. die-cut size: 10 x 10 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model B: manual closure of the protective door

          - Model B+P: pneumatic closure of the protective door after pressing

            a push-button on the control panel

• Both models can also be operated with counter-pressure. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For smaller runs, especially for labels
• Max. die-cut size: 180 x 180 mm
• Min. die-cut size: 17 x 17 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model A: manual closure of the protective door (left pic.)

          - Model A+P: pneumatic closure of the protective door after pressing

             a push-button on the control panel (left pic.)

          - Model AL: by electronic light barrier (right pic. incl. counter-pressure unit)

• All models can also be operated with counter-pressure. This is helpful e.g. when working with embossed paper, plastics and foil that allow only minimum tolerances.

A label or a brochure with a complex and extraordinary shape demonstrably attracts the customer’s attention. In order to achieve a high-quality produced outer contour, a die-cut is recommended for almost simple forms with rounded or cut corners up to complicated fancy contours. The BUSCH die-cutting machine program offers suitable and flexible solutions for each individual requirement - for small, medium or large runs. It is noted for their safe operation, short set-up times and maintenance free operation.

Application range: labels, inmould labels, brochures, credit and service cards, plastic stickers, children's booklets, note pads (also with a sloping edge) and similar articles.

Material for die-cutting: paper, board and all related material, different plastics and plastic laminates, PP- or PE-foil, self-adhesive foil, tempered and varnished aluminium foil, etc.

• For large-sized products up to 330 x 380 mm
• Min. die-cut size: 80 x 100 mm; with counter-pressure 70 x 140 mm
• Activation of the cutting stroke: by electronic light barrier
• The machine is especially used with counter-pressure (see picture) for the production of inmould-labels made of plastic material (PP- or PE-foil).
• Without the counter-pressure unit, but equipped with a delivery tray instead, the machine works on punching products made of paper, board and PVC.

• For large sizes, with high punching power
• Activation of the cutting stroke: by electronic light barrier
• Max. die-cut size:

           - Model BL: 220 x 260 mm

           - Model BLS: 230 x 320 mm

• Min. die-cut size:

           - Model BL: 15 x 15 mm; with counter-pressure 30 x 30 mm

           - Model BLS: 20 x 20 mm; with counter-pressure 30 x 30 mm

• Both models can be operated with counter-pressure as well. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For larger cutting sizes with increased punching power
• Max. die-cut size: 230 x 230 mm
• Min. die-cut size: 10 x 10 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model B: manual closure of the protective door

          - Model B+P: pneumatic closure of the protective door after pressing a push-button on the control panel

• Both models can also be operated with counter-pressure. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For smaller runs, especially for labels
• Max. die-cut size: 180 x 180 mm
• Min. die-cut size: 17 x 17 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model A: manual closure of the protective door (left pic.)

          - Model A+P: pneumatic closure of the protective door after pressing

            a push-button on the control panel (left pic.)

          - Model AL: by electronic light barrier (right pic. incl. counter-pressure unit)

• All models can also be operated with counter-pressure. This is helpful e.g. when working with embossed paper, plastics and foil that allow only minimum tolerances.

A label or a brochure with a complex and extraordinary shape demonstrably attracts the customer’s attention. In order to achieve a high-quality produced outer contour, a die-cut is recommended for almost simple forms with rounded or cut corners up to complicated fancy contours. The BUSCH die-cutting machine program offers suitable and flexible solutions for each individual requirement - for small, medium or large runs. It is noted for their safe operation, short set-up times and maintenance free operation.

Application range: labels, inmould labels, brochures, credit and service cards, plastic stickers, children's booklets, note pads (also with a sloping edge) and similar articles.

Material for die-cutting: paper, board and all related material, different plastics and plastic laminates, PP- or PE-foil, self-adhesive foil, tempered and varnished aluminium foil, etc.

• For large-sized products up to 330 x 380 mm
• Min. die-cut size: 80 x 100 mm; with counter-pressure 70 x 140 mm
• Activation of the cutting stroke: by electronic light barrier
• The machine is especially used with counter-pressure (see picture) for the production of inmould-labels made of plastic material (PP- or PE-foil). Without the counter-pressure unit, but equipped with a delivery tray instead, the machine works on punching products made of paper, board and PVC.

• For large sizes, with high punching power
• Activation of the cutting stroke: by electronic light barrier
• Max. die-cut size:

          - Model BL: 220 x 260 mm

          - Model BLS: 230 x 320 mm

• Min. die-cut size:

          - Model BL: 15 x 15 mm; with counter-pressure 30 x 30 mm

          - Model BLS: 20 x 20 mm; with counter-pressure 30 x 30 mm

• Both models can be operated with counter-pressure as well. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For larger cutting sizes with increased punching power
• Max. die-cut size: 230 x 230 mm
• Min. die-cut size: 10 x 10 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model B: manual closure of the protective door

          - Model B+P: pneumatic closure of the protective door after pressing

            a push-button on the control panel

•  Both models can also be operated with counter-pressure. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For smaller runs, especially for labels
• Max. die-cut size: 180 x 180 mm
• Min. die-cut size: 17 x 17 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model A: manual closure of the protective door (left pic.)

          - Model A+P: pneumatic closure of the protective door after pressing

             a push-button on the control panel (left pic.)

          - Model AL: by electronic light barrier (right pic. incl. counter-pressure unit)

• All models can also be operated with counter-pressure. This is helpful e.g. when working with embossed paper, plastics and foil that allow only minimum tolerances.

A label or a brochure with a complex and extraordinary shape demonstrably attracts the customer’s attention. In order to achieve a high-quality produced outer contour, a die-cut is recommended for almost simple forms with rounded or cut corners up to complicated fancy contours. The BUSCH die-cutting machine program offers suitable and flexible solutions for each individual requirement - for small, medium or large runs. It is noted for their safe operation, short set-up times and maintenance free operation.

Application range: labels, inmould labels, brochures, credit and service cards, plastic stickers, children's booklets, note pads (also with a sloping edge) and similar articles.

Material for die-cutting: paper, board and all related material, different plastics and plastic laminates, PP- or PE-foil, self-adhesive foil, tempered and varnished aluminium foil, etc.

• For automatic banding of product piles and rows of product piles - the ideal solution behind folding machines with shingle delivery and on guillotines.
• Equipped with an integrated feed pusher, packet recognition, pneumatic compression of packets and a simple touchscreen-operation.
• Banding is performed with coated Kraft paper tape or polypropylene foil (30 mm tape width).
• The machine is mobile on four castors and suitable for variable applications, available for delivery to the right or left side with optional 180° roller delivery or straight roller delivery in two different lengths.
• A high efficiency is achieved due to automatic feeding of the product piles.

• The Inline Bander with automatic feeding and alignment is directly connected to machines with product pile delivery. Product piles of all types are banded for example behind gang stitchers with three-knife trimmer and stacker.
• Equipment includes an integrated feed pusher, packet recognition, multiple packet alignment, pneumatic compression of packets and a simple touchscreen-operation.
• Banding is performed with coated Kraft paper tape or polypropylene foil (30 mm tape width).
• The delivery is optionally selectable with 180° roller delivery or straight roller delivery in two different lengths.
• The space requirement without delivery is just 1.0 m².
• A notable high efficiency is achieved due to automatic feeding of the product piles and the possibility of integration into existing plants.

• Banding material is either coated Kraft paper tape (white or brown) or transparent polypropylene foil tape.
• Available in 2 different versions:

          - TB 39-30: for 30 mm tape width

          - TB 39-50: for 50 mm tape width

• Both machine models are equipped with a digital display, error message and electronic temperature control.
• Adjustable position stops are offered as an option.
• Machines can be operated by:

          - single stroke release by press-button

          - single stroke release by foot pedal

          - automatic sensor release

• For high volume production a movable Large Reel Stand (GRS) is offered for reels with 800 m Kraft paper tape or 1200 m foil tape. The stand height is easily adjustable by means of a gas pressure spring. The band feeding is controlled by sensor detection.
• Picture: TB 39 with GRS

• All types of products are banded with coated Kraft paper tape (white or brown) or with transparent polypropylene foil tape.
• Two sizes are available with 2 tape widths each that are easily adjustable:

           - TB 24 & 26 I: for 20 and 30 mm tape width

           - TB 24 & 26 II: for 40 and 50 mm tape width

• The banding machines are equipped with adjustable position stops, digital display, error message and electronic temperature control.
• Machines can be operated by:

          - single stroke release by press-button

          - single stroke release by foot pedal

          - automatic sensor release

• For high volume production a movable large reel stand is offered for reels with 800 m Kraft paper tape or 1200 m foil tape. The stand height is easily adjustable by means of a gas pressure spring. The band feeding is controlled by sensor detection.

• The space-saving Multiple Bander is used for banding rows of paper piles, such as labels, square-cut on a guillotine.
• Installation either as a stand-alone machine (e.g. with an air pallet lift) or linked to all known guillotines.
• Available for 3 different max. feeding sizes (L x W):

          - MB 54: 540 x 1040 mm

          - MB 74: 740 x 1040 mm (picture)

          - MB 104: 1040 x 1040 mm

• An increased output of the cutting plant is achieved by more effective work flow.
• Also applicable for mixed sheets (patented machine system).
• With 4-6 banding stations as standard and up to 12 stations as an option, with central adjustment.
• Banding material is either polyethylene tape or Kraft paper tape in 25 mm tape width (optional: 20, 30 or 40 mm).
• Standard equipment with integrated feed pusher, safety light barrier and clear text display.
• Adjustable height of the working plate (machine height) & slope of the roller delivery. All models are available either for delivery to the right or to the left side.

• For automatic banding of product piles and rows of product piles - the ideal solution behind folding machines with shingle delivery and on guillotines.
• Equipped with an integrated feed pusher, packet recognition, pneumatic compression of packets and a simple touchscreen-operation.
• Banding is performed with coated Kraft paper tape or polypropylene foil (30 mm tape width).
• The machine is mobile on four castors and suitable for variable applications, available for delivery to the right or left side with optional 180° roller delivery or straight roller delivery in two different lengths.
• A high efficiency is achieved due to automatic feeding of the product piles.

• The Inline Bander with automatic feeding and alignment is directly connected to machines with product pile delivery. Product piles of all types are banded for example behind gang stitchers with three-knife trimmer and stacker.
• Equipment includes an integrated feed pusher, packet recognition, multiple packet alignment, pneumatic compression of packets and a simple touchscreen-operation.
• Banding is performed with coated Kraft paper tape or polypropylene foil (30 mm tape width).
• The delivery is optionally selectable with 180° roller delivery or straight roller delivery in two different lengths.
• The space requirement without delivery is just 1.0 m².
• A notable high efficiency is achieved due to automatic feeding of the product piles and the possibility of integration into existing plants.

• Banding material is either coated Kraft paper tape (white or brown) or transparent polypropylene foil tape.
• Available in 2 different versions:

          - TB 39-30: for 30 mm tape width

          - TB 39-50: for 50 mm tape width

• Both machine models are equipped with a digital display, error message and electronic temperature control.
• Adjustable position stops are offered as an option.
• Machines can be operated by:

          - single stroke release by press-button

          - single stroke release by foot pedal

          - automatic sensor release

• For high volume production a movable Large Reel Stand (GRS) is offered for reels with 800 m Kraft paper tape or 1200 m foil tape. The stand height is easily adjustable by means of a gas pressure spring. The band feeding is controlled by sensor detection.
• Picture: TB 39 with GRS

• All types of products are banded with coated Kraft paper tape (white or brown) or with transparent polypropylene foil tape.
• Two sizes are available with 2 tape widths each that are easily adjustable:

           - TB 24 & 26 I: for 20 and 30 mm tape width

           - TB 24 & 26 II: for 40 and 50 mm tape width

• The banding machines are equipped with adjustable position stops, digital display, error message and electronic temperature control.
• Machines can be operated by:

          - single stroke release by press-button

          - single stroke release by foot pedal

          - automatic sensor release

• For high volume production a movable large reel stand is offered for reels with 800 m Kraft paper tape or 1200 m foil tape. The stand height is easily adjustable by means of a gas pressure spring. The band feeding is controlled by sensor detection.
• Picture: TB 26 I with foot pedal

• The space-saving Multiple Bander is used for banding rows of paper piles, such as labels, square-cut on a guillotine.
• Installation either as a stand-alone machine (e.g. with an air pallet lift) or linked to all known guillotines.
• Available for 3 different max. feeding sizes (L x W):

          - MB 54: 540 x 1040 mm

          - MB 74: 740 x 1040 mm (picture)

          - MB 104: 1040 x 1040 mm

• An increased output of the cutting plant is achieved by more effective work flow.
• Also applicable for mixed sheets (patented machine system).
• With 4-6 banding stations as standard and up to 12 stations as an option, with central adjustment.
• Banding material is either polyethylene tape or Kraft paper tape in 25 mm tape width (optional: 20, 30 or 40 mm).
• Standard equipment with integrated feed pusher, safety light barrier and clear text display.
• Adjustable height of the working plate (machine height) & slope of the roller delivery. All models are available either for delivery to the right or to the left side.

Fully hydraulic. High cutting accuracy up to the last sheet.

Faster, more precise, more economical – these are the attributes Schneider Senator S-Line is known for. The patented direct-hydraulic drive concept sets new standards for the performance of cutting machines.

• cutting width:

          - S-Line 115H: 1150 mm

          - S-Line 137H: 1370 mm

          - S-Line 155H: 1550 mm (pic.)

• fully hydraulic drive
• computer-control with 15“ TFT-display
• solid cast iron frame
• infrared safety barriers
• rust-proof cutting table with air film and stainless steel surface, with blower
• automated knife change at the front (AKC) into a patented knife change cassette
• clamp pressure adjustment via display, programmable and controlled by proportional valve
• program correction function, linear and percentagewise
• optical cut indicator
• 2 knifes (HSS quality)
• 5 sinus cutting sticks
• slot cover
• clamp bar cover plate
• CE & EN 1010 conform
• options:

          - TrimmMaster (automatic waste removal)

          - swinging and/or tilting back gauge, program-controlled

          - downholder at the back gauge, program-controlled

          - lay edge control, program-controlled

          - retractable rear cover, electrically locked

          - retractable side gauge

• cutting width: 780 or 920 mm
• direct electromechanical knife drive
• hydraulic clamp bar
• rust-proof stainless steel side tables (without air film)
• one-piece rear table (without slot cover band)
• closed rear table cover
• manual clamp pressure adjustment
• 1 HSS knife

• cutting width: 780 or 920 mm
• direct electromechanical knife drive
• hydraulic clamp bar
• rust-proof stainless steel side tables with air film
• one-piece rear table (without slot cover band)
• hinged rear table cover
• proportional valve controlled clamp pressure adjustment
• program correction linear and in percentage terms
• Ethernet interface
• scaled swinging / tilting back gauge adjustment
• 2 HSS knives

• For large-sized products up to 330 x 380 mm
• Min. die-cut size: 80 x 100 mm; with counter-pressure 70 x 140 mm
• Activation of the cutting stroke: by electronic light barrier
• The machine is especially used with counter-pressure (see picture) for the production of inmould-labels made of plastic material (PP- or PE-foil).
• Without the counter-pressure unit, but equipped with a delivery tray instead, the machine works on punching products made of paper, board and PVC.

• For large sizes, with high punching power
• Activation of the cutting stroke: by electronic light barrier
• Max. die-cut size:

           - Model BL: 220 x 260 mm

           - Model BLS: 230 x 320 mm

• Min. die-cut size:

           - Model BL: 15 x 15 mm; with counter-pressure 30 x 30 mm

           - Model BLS: 20 x 20 mm; with counter-pressure 30 x 30 mm

• Both models can be operated with counter-pressure as well. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For smaller runs, especially for labels
• Max. die-cut size: 180 x 180 mm
• Min. die-cut size: 17 x 17 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model A: manual closure of the protective door (left pic.)

          - Model A+P: pneumatic closure of the protective door after pressing

            a push-button on the control panel (left pic.)

          - Model AL: by electronic light barrier (right pic. incl. counter-pressure unit)

All models can also be operated with counter-pressure. This is helpful e.g. when working with embossed paper, plastics and foil that allow only minimum tolerances.

• For larger cutting sizes with increased punching power
• Max. die-cut size: 230 x 230 mm
• Min. die-cut size: 10 x 10 mm; with counter-pressure 30 x 30 mm
• Activation of the cutting stroke:

          - Model B: manual closure of the protective door

          - Model B+P: pneumatic closure of the protective door after pressing

            a push-button on the control panel

• Both models can also be operated with counter-pressure. This is e.g. helpful when working with embossed paper, plastics and foil that allow only minimum tolerances.

A label or a brochure with a complex and extraordinary shape demonstrably attracts the customer’s attention. In order to achieve a high-quality produced outer contour, a die-cut is recommended for almost simple forms with rounded or cut corners up to complicated fancy contours. The BUSCH die-cutting machine program offers suitable and flexible solutions for each individual requirement - for small, medium or large runs. It is noted for their safe operation, short set-up times and maintenance free operation.

Application range: labels, inmould labels, brochures, credit and service cards, plastic stickers, children's booklets, note pads (also with a sloping edge) and similar articles.

Material for die-cutting: paper, board and all related material, different plastics and plastic laminates, PP- or PE-foil, self-adhesive foil, tempered and varnished aluminium foil, etc.

For semi-automatic mode of operation with high pile throughput by programmable operation. Installation without protective fences, as the hydraulic movements are carried out by pressed push-button. Fully automatic airing programs with automatic start and stop.

Max sheet size:

  - 800 x 1200 mm: SWH-SA 125 RLA

  - 1060 x 1450 mm: SWH-SA 155 RLA

  - 1220 x 1650 mm: SWH-SA 180 RLA

Process acceleration is achieved by complete automation.

The programmable fully automatic operation with reinforced hydraulics enables the high pile throughput. Reproducible pile treatment is possible by storable airing programs.

The installation of protective fences with light barriers and the motorized-pneumatic aligning gauge with paper recognition enables the fully automatic operation.

An access without machine stop is possible during airing process.

Max. sheet size:

  - 800 x 1200 mm: SWH 125 RLA Automatic

  - 1060 x 1450 mm: SWH 155 RLA Automatic

  - 1220 x 1650 mm: SWH 180 RLA Automatic

The SWH Pile Turner – powerful and efficient with various options

• SWH 90 / SWH 125 RLA: equipped as standard with airing (1 blower), pressure control flaps, jogging, electrical air volume regulation at the control desk, slewable control desk, adjustable aligning gauge, tilting (15°)
• SWH 125 RLA, the new SPEEDTURNER® 2020 with an increase in efficiency of the airing function, thanks to the latest Siemens programmable logic controller. In addition and amongst others it comes with a new aligning gauge that adapts to the pile height automatically and offers two selectable tilting positions (15° and 10°).
• SWH 155 / SWH 180: a unit for turning only, but without airing, jogging and aligning gauge.
• SWH 155 / SWH 180 RLA: with airing (4 blowers), pressure control flaps, jogging, electrical air volume regulation at the control desk, slewable control desk, adjustable aligning gauge, tilting (15°)
• Numerous additional options are offered depending on the chosen model
• Max. sheet size:

          - 600 x 750 mm: SWH 90 RLA

          - 800 x 1200 mm: SWH 125 RLS

          - 1060 x 1450 mm: SWH 155 (RLA)

          - 1220 x 1650 mm: SWH 180 (RLA)

The SE-series - The efficient low priced Pile Turner

• SE 90 / SE 125 for turning only (without airing) with fixed control desk
• SE 90 / SE 125 RLA: with airing (1 blower), slewable control desk, fixed aligning gauge, jogging, tilting (15°), regulation of air volume by hand lever located on the machine body
• Pressure control flaps are offered as additional option (the pile is not compressed)
• Max. sheet size:

          - SE 90: 600 x 750 mm

          - SE 125: 800 x 1200 mm

The technically mature BUSCH pile turners speeds up and improves both the printing and the finishing process. Different sorts of paper and board with varying weights can be handled on the turner. The solid and modern designed machines are well-known for their easy handling worldwide. With the large range of models, with numerous options, BUSCH fulfils all individual requirements.