Our AKTIPRINT S UV STANDARD DRYER is a universal, fixed-position, continuous throughput unit. It is used to cure UV inks, UV adhesives, coatings and solder resists for medium and large format printing applications. The AKTIPRINT S UV STANDARD DRYER is suitable for use with all commercially available materials such as paper, cardboard, metal, plastics, glass and wood.This unit is available with either 1, 2, or 3 UV (Hg) lamps.
The following maximum UV lamp outputs are available:
Up to 130 cm format = max. 120 W/cm
= 140 cm up to 160 cm format = max. 100 W/cm
= 160 cm format = max. 80 W/cm
Lamp output can be regulated from 30 to 100%.
ECGs can on request be delivered for a higher lamp power.
The professional version of the AKTIPRINT S UV dryer:
This air-cooled system is equipped with sturdy, focusing aluminum half-shell reflectors, lamp current displays as well as a digital speed display, a control panel on the unit, an operating hour counter, a PTFE conveyor belt, a vacuum suction system, an ozone exhaust, a high-volume air cooling system with temperature control, light protection shielding on both sides of the lamp housing and stray field transformer(s). The conveyor belt speed is continuously adjustable from 5 to 35 m/min.
In the standard version, material is transported from right to left. Upon request, we can also configure the material transport from left to right.
Our standard sizes range in 10 cm steps from 40 cm up to 180 cm. Special format sizes are available upon request.
We offer the following options: quartz plates, a slanted material feed tray, a material input and exit detection system (to save energy), ozone filter, a choice of conveyor belt speeds, conveyor belt extensions, ECGs (electronic ballasts instead of standard transformers) and lamp output of max. 200 W/cm.
The customer is responsible for installation of the required air exhaust system, power supply connection and fusing.