Schneider Senator SSB GmbH

Bürgermeister-Kröger-Str. 36, 21244 Buchholz
Germany
Telephone +49 4186 9710
Fax +49 4186 971126
info@schneider-senator.de

This company is co-exhibitor of
Gerhard Busch GmbH

Location

Hall map

drupa 2016 hall map (Hall 6): stand C40

Fairground map

drupa 2016 fairground map: Hall 6

Our range of products

Product categories

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.010  Cutting machines and cutting systems
  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.015  Loading and unloading devices for high-speed cutting machines and cutting systems

Loading and unloading devices for high-speed cutting machines and cutting systems

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.020  Destackers

Destackers

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.025  Rear table loading

Rear table loading

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.040  Multiple-up cutting machines
  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.045  Paper sheet counting machines

Paper sheet counting machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.050  Pressing stations

Pressing stations

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.060  Jogging tables and automatic jogging machines

Jogging tables and automatic jogging machines

  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.065  High-speed cutting machines
  • 03  postpress/converting/packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.075  Pile lifting devices

Pile lifting devices

Our products

Product category: Cutting machines and cutting systems

Sheet Transport System BTS

 

Sheet Transport System BTS

The BTS pusher system has been designed for automatic loading of material to be cut from joggers or air board lifts on to the rear table of the guillotine

The transport system with buffer stations for one or optionally two reams ensures an optimal flow of material – controlled by the new PCC power cutting control. This negates the need for a separate control panel.

The table surface is made of VA stainless steel, air blown.

.

Features

Automatic loading of the rear table with buffer station

Buffer stations for one or optionally two reams

Portal pusher system

Stable and torsion-free aluminium profile construction

Frequency-controlled gear motor

Encoder-controlled positioning

Low-noise and maintenance-free toothed belt drive

VA stainless steel table surface, air blown

Adjustable sheet transport speed depending on customer’s request

B & R control

 

 The BTS equipment needs the optional retractable side gauge (ASL) on the guillotine.

More Less

Product category: Cutting machines and cutting systems

Guillotines S-Line 115H, 137H, 155H

Fully hydraulic. High cutting accuracy up to the last sheet.

Faster, more precise, more economical – these are the attributes Schneider Senator S-Line is known for. The patented direct-hydraulic drive concept sets new standards for the performance of cutting machines.

  • cutting width:

          - S-Line 115H: 1150 mm

          - S-Line 137H: 1370 mm

          - S-Line 155H: 1550 mm (pic.)

  • fully hydraulic drive
  • computer-control with 15“ TFT-display
  • solid cast iron frame
  • infrared safety barriers
  • rust-proof cutting table with air film and stainless steel surface, with blower
  • automated knife change at the front (AKC) into a patented knife change cassette
  • clamp pressure adjustment via display, programmable and controlled by proportional valve
  • program correction function, linear and percentagewise
  • optical cut indicator
  • 2 knifes (HSS quality)
  • 5 sinus cutting sticks
  • slot cover
  • clamp bar cover plate
  • CE & EN 1010 conform
  • options:

          - TrimmMaster (automatic waste removal)

          - swinging and/or tilting back gauge, program-controlled

          - downholder at the back gauge, program-controlled

          - lay edge control, program-controlled

          - retractable rear cover, electrically locked

          - retractable side gauge

More Less

Product category: Cutting machines and cutting systems

Guillotines 78 & 92 compact

  • cutting width: 780 or 920 mm
  • direct electromechanical knife drive
  • hydraulic clamp bar
  • rust-proof stainless steel side tables (without air film)
  • one-piece rear table (without slot cover band)
  • closed rear table cover
  • manual clamp pressure adjustment
  • 1 HSS knife

More Less

Product category: Cutting machines and cutting systems

Guillotines 78 & 92 advance

  • cutting width: 780 or 920 mm
  • direct electromechanical knife drive
  • hydraulic clamp bar
  • rust-proof stainless steel side tables with air film
  • one-piece rear table (without slot cover band)
  • hinged rear table cover
  • proportional valve controlled clamp pressure adjustment
  • program correction linear and in percentage terms
  • Ethernet interface
  • scaled swinging / tilting back gauge adjustment
  • 2 HSS knives

More Less

Product category: Multiple-up cutting machines

Guillotines S-Line 115H, 137H, 155H

Fully hydraulic. High cutting accuracy up to the last sheet.

Faster, more precise, more economical – these are the attributes Schneider Senator S-Line is known for. The patented direct-hydraulic drive concept sets new standards for the performance of cutting machines.

  • cutting width:

          - S-Line 115H: 1150 mm

          - S-Line 137H: 1370 mm

          - S-Line 155H: 1550 mm (pic.)

  • fully hydraulic drive
  • computer-control with 15“ TFT-display
  • solid cast iron frame
  • infrared safety barriers
  • rust-proof cutting table with air film and stainless steel surface, with blower
  • automated knife change at the front (AKC) into a patented knife change cassette
  • clamp pressure adjustment via display, programmable and controlled by proportional valve
  • program correction function, linear and percentagewise
  • optical cut indicator
  • 2 knifes (HSS quality)
  • 5 sinus cutting sticks
  • slot cover
  • clamp bar cover plate
  • CE & EN 1010 conform
  • options:

           - TrimmMaster (automatic waste removal)

           - swinging and/or tilting back gauge, program-controlled

           - downholder at the back gauge, program-controlled

           - lay edge control, program-controlled

           - retractable rear cover, electrically locked

           - retractable side gauge

More Less

Product category: Multiple-up cutting machines

Guillotines 78 & 92 compact

  • cutting width: 780 or 920 mm
  • direct electromechanical knife drive
  • hydraulic clamp bar
  • rust-proof stainless steel side tables (without air film)
  • one-piece rear table (without slot cover band)
  • closed rear table cover
  • manual clamp pressure adjustment
  • 1 HSS knife

More Less

Product category: Multiple-up cutting machines

Guillotines 78 & 92 advance

  • cutting width: 780 or 920 mm
  • direct electromechanical knife drive
  • hydraulic clamp bar
  • rust-proof stainless steel side tables with air film
  • one-piece rear table (without slot cover band)
  • hinged rear table cover
  • proportional valve controlled clamp pressure adjustment
  • program correction linear and in percentage terms
  • Ethernet interface
  • scaled swinging / tilting back gauge adjustment
  • 2 HSS knives

More Less

Product category: High-speed cutting machines

Guillotines S-Line 115H, 137H, 155H

Fully hydraulic. High cutting accuracy up to the last sheet.

Faster, more precise, more economical – these are the attributes Schneider Senator S-Line is known for. The patented direct-hydraulic drive concept sets new standards for the performance of cutting machines.

  • cutting width:

          - S-Line 115H: 1150 mm

          - S-Line 137H: 1370 mm

          - S-Line 155H: 1550 mm (pic.)

  • fully hydraulic drive
  • computer-control with 15“ TFT-display
  • solid cast iron frame
  • infrared safety barriers
  • rust-proof cutting table with air film and stainless steel surface, with blower
  • automated knife change at the front (AKC) into a patented knife change cassette
  • clamp pressure adjustment via display, programmable and controlled by proportional valve
  • program correction function, linear and percentagewise
  • optical cut indicator
  • 2 knifes (HSS quality)
  • 5 sinus cutting sticks
  • slot cover
  • clamp bar cover plate
  • CE & EN 1010 conform
  • options:

          - TrimmMaster (automatic waste removal)

          - swinging and/or tilting back gauge, program-controlled

          - downholder at the back gauge, program-controlled

          - lay edge control, program-controlled

          - retractable rear cover, electrically locked

          - retractable side gauge

More Less

Product category: High-speed cutting machines

Guillotines 78 & 92 compact

  • cutting width: 780 or 920 mm
  • direct electromechanical knife drive
  • hydraulic clamp bar
  • rust-proof stainless steel side tables (without air film)
  • one-piece rear table (without slot cover band)
  • closed rear table cover
  • manual clamp pressure adjustment
  • 1 HSS knife

More Less

Product category: High-speed cutting machines

Guillotines 78 & 92 advance

  • cutting width: 780 or 920 mm
  • direct electromechanical knife drive
  • hydraulic clamp bar
  • rust-proof stainless steel side tables with air film
  • one-piece rear table (without slot cover band)
  • hinged rear table cover
  • proportional valve controlled clamp pressure adjustment
  • program correction linear and in percentage terms
  • Ethernet interface
  • scaled swinging / tilting back gauge adjustment
  • 2 HSS knives

More Less

About us

Company details

The company has been founded in 1948 and is manufacturer of the well known Schneider Senator guillotines, cutting systems and peripherals.

The company was taken over by Gerhard Busch GmbH in 2009 and is being managed by Ekkehardt Busch and Burkhardt Busch.

The modern, powerful machines and peripherals are developed and manufactured exclusively in own factories in Germany.

The products of both companies are shown at drupa 2016 on a joint stand, just as at drupa 2012.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

> 75%

Number of employees

20-49

Foundation

1948

Area of business
  • postpress/ converting/ packaging
  • future technologies