Manage stand orders
Select Option


Maestro Serrano 23, 46940 Manises


  •   Hall 13 / B36

Our range of products

Product categories

  • 05  materials
  • 05.09  Adhesives and glues
  • 05.09.020  Hotmelts (EVA, PA, PO)

Our products

Product category: Hotmelts (EVA, PA, PO)

Pur Hot Melt

Are you looking for an industrial glue that gives you the best cohesion and climate resistance? Without a doubt, Pur Hot Melt is the best choice.   Pur Hot Melt is a reactive glue based on Polyurethane. It is one of the adhesives with the greatest capacity for cohesion.   One of the most important aspects of this industrial glue is its drying process.   It consists of two phases: a primary phase and a secondary phase in which it absorbs humidity from the environment or from surrounding materials. For this reason, although drying is quite fast, the curing process of Pur Hot Melt can last between 24 and 72 hours. This polyurethane hot melt is the best choice.   Therefore, being a reactive glue, it needs moisture for this reaction to take place. Both in the air and in the material being glued, this condition usually occurs, so it does not usually cause problems.   Pur hot melt differs from other adhesive products in that it can be used both indoors and outdoors thanks to its high resistance to moisture. In fact, they retain their cohesion from -40º to 100º.   Without a doubt, if we need a glue for difficult materials Pur Hot Melt is the best option. This polyolefin pur melt is able to present good adhesion conditions in non-porous materials and with different elements.  
  • There are industries in which this type of pur adhesive is very present such as the furniture industry or automotive, there are also others such as binding or packaging where it is entering more slowly due to its high cost but in which it is already present.
  • The furniture sector: its quick cure makes it ideal for carpentry
  • Product assembly: in industries such as automotive or
  • Binding
  • Packaging
If you want to know more about the specific characteristics of this type of glue you can visit our complete guide of polyurethane adhesives. Discover all the advantages of the polyester hot melt.

In Indumarsan we have a wide trajectory of more than 25 years of experience. Throughout this stage we have always guaranteed the highest quality in all our products. Our main premise is to treat each client in a personalized way. Therefore, we adapt to your needs, providing your order within two or three days. We are a professional glue company and we know everything about high temperature hot glue and pressure sensitive adhesive.

All our products pass demanding quality controls that guarantee that the industrial glue fulfills all the necessary conditions for its sale.


More Less

Product category: Hotmelts (EVA, PA, PO)

PSA hot melt

Would you like to bet on PSA hot melt for the manufacture of adhesive tape? From Indumarsan we can help you, offering you products of the best quality with which you will obtain professional results.

They are used for different uses such as: health and hygiene products, adhesive tapes or labels of all kinds.

Initial adhesion: This is the immediate adhesion of the label when it comes into contact with the substrate. A label with a high initial adhesion will quickly attach to the substrate. A low nitial tack label will have a low level of adhesion when first applied and can be removed cleanly.

Final Adhesion: It is the adhesion final or maximum that the label will reach when the adhesive penetrates into the substrate. The time required to achieve adhesion final may depend on the shear of the adhesive, the roughness of the substrate and the ambient temperature. Settling time may vary from 2 to 24 hours, depending on conditions. Initial accession and final accession are not necessarily related.

Shear Strength: A measure of the internal cohesion strength of the adhesive. The shear of the adhesive is an indication of the softness of an adhesive. A low (soft) shear adhesive has a

greater tendency to flujo (resulting in higher initial adhesion) and has a greater likelihood of

the adhesive separating under tension. A high shear adhesive (firme) has a lower probability of separating under tension due to its high internal cohesion strength, and will have a lower

probability of fluir (possibly lower initial adhesion).

One of the keys to the success of pressure sensitive adhesives is that they manage to maintain the balance between adhesion and cohesion. In other words, it sticks to the substrate quickly by simply applying pressure and effectively penetrates the pores of the substrate in such a way that adhesion is permanently maintained.

Hot Melt PSAs are used on all types of surfaces exposed to different conditions. Therefore, one of the characteristics that we cannot overlook is the resistance to ultraviolet rays of the pressure sensitive glue.

Within the Hot Melt PSA we differentiate different types according to the use to which it is going to be destined. In this way, each pressure-sensitive adhesive acquires its own specific characteristics.

PSA Label Adhesives
One of the applications of the PSA glue are the labels, in any field, from food and beverages to massage or logistics. .

PSA Adhesives for Adhesive Tapes

PSA adhesives for sanitary materials

More Less

Product category: Hotmelts (EVA, PA, PO)

Hot Melt Metalocene

If you are looking for an industrial glue for packaging, Hot Melt Metalocene is undoubtedly the best option.

This is an adhesive with special properties that provides a higher yield than traditional EVA hot melt.

What is metalocene?
Metalocene is part of a family of plastic materials used to make hot melt adhesives, increasingly common in many industries.

The main feature of Metalocene Hot Melt is that not much product is needed to achieve optimum results. In other words, the gram/m2 yield is greater due to its density, so with less grammage the same linear metres are covered.

Its efficiency means that one of its main advantages is its precision. It is therefore suitable for

work where a clean result with high adhesion power is required.

It is true that its price is slightly higher than other industrial adhesives. However, having to use 30% less material in the long run makes it more profitable.

Even though they are less dense, their adhesion power is excellent.

The main premise you should have when using this glue is that less is more. That is to say, you will obtain optimal results in your works using little quantity of product.

Here are the benefits metalocene can bring you.

Industrial glue that avoids threads
Surely if you have used industrial adhesives at any time you have been produced threads that can ruin the work.

If so, the adhesive you have used is of poor quality or your equipment is misconfigured at a low temperature.

To be sure that this type of problem will be avoided, it is best to bet with a hot melt glue such as Metalocene Hot Melt.

The metalocene takes care of his equipment
As a hot melt adhesive, Metalocene Hot Melt melts cleanly and remains in the deposit so hardly any carbon is generated as it has a higher thermal resistance.

That’s why the metalocene will save you time unclogging nozzles or hoses and the work will be done efficiently.

Metalocene hot melt is odorless
Metallocene, despite being a hot melt adhesive, is clean-burning so it prevents bad odours when melted.

Metalocene is resistant to extreme temperatures
Metalocene hot melt has excellent ability to adapt to cold or hot temperatures. In fact, it is a product that is widely used in the freezing industry or in the microwave ready meals sector.
In addition, this quality allows for greater stability at higher temperatures. That is, you can stay in a hot machine without burning for longer than other adhesives, which will allow you to leave it on for longer.

More Less

About us

Company details

Our quality and our refusal to use fillers in our adhesives make us perfect for the most demanding glue injection machines.

INDUMARSAN focuses on quality by checking the different characteristics of our range of water-based adhesives. Each product in our range of hot-melt adhesives undergoes rigorous quality checks and complies with the FDA indirect food contact regulations.

Our commitment stems from our efforts to get the best results in everything we do to offer the customer the best quality end product.

We have an integrated work process which not only includes the ends but also the means. We strive to employ the best technologies and professionals, making sure our internal procedures are as efficient as possible.

More Less