The FoilTech FT-12 is the latest in the range of foil fusing machines from Caslon Limited. This hand fed model incorporates a fully digital control panel for accurate setting of both temperature and speed, thereby ensuring that any repeat job can be simply and quickly re-established.
The FoilTech FT-12F is the automatic feed version of the FT-12 in the range of foil fusing machines from Caslon Limited. This friction feed model incorporates a fully digital control panel for accurate setting of both temperature and speed, thereby ensuring that any repeat job can be simply and quickly re-established.
The FoilTech FT-22 is a hand feed machine in the FoilTech range of foil fusing equipment and incorporates two foil roll holders for side by side foiling! This hand feed model has a fully digital control panel for accurate setting of both temperature and speed, thereby ensuring that any repeat job can be simply and quickly re-established.
The FoilTech FT-22F is the automatic feed version of the FT-22 and includes two foil roll holders for side by side foiling!. This friction feed model incorporates a fully digital control panel for accurate setting of both temperature and speed, thereby ensuring that any repeat job can be simply and quickly re-established.
Thee Zip10M cutter/slitter is a unique machine designed to produce business cards and other multiple-up products produced on a variety of printing methods. The Zip10M uses an adjustable blade cassette to slit the sheet as it passes through the machine. A guillotine cutter cross cuts the sheet as it advances through the machine, driven by the programmable paper drive. The combination of adjustable slitting with programmable guillotine cutting allows common products (like 10-up business cards) to be easily processed in a single pass.
The new Zip-21A cutter/slitter is the deep pile, air fed version of the original Zip21C designed to cut business cards & other multiple-up products produced from a range of different printing methods. The Zip21A is faster than the Zip21C, producing 18,500 cards per hour and comes mounted on a stand which houses the extra large waste container required for such quick operating speeds. The Zip-21A cross cuts the sheet with a guillotine and then, with a very easily adjustable blade cassette, it will slit and/or score/perforate the sheet immediately before it exits to the delivery tray. This clever combination of two cutting systems allows a multitude of common products (like 21-up or 24-up business cards) to be accurately processed in a single pass. It can register from either the lead edge of the sheet or from a printed registration mark at the top of the job, thereby reducing the problems of image drift which are so common with digital printers.
Product category: Gluing machines, Adhesive applicating machines and devices
Maxit Adhesive System
The Maxit adhesive system is a motorised roller coater which applies a very thin smooth coating of a unique hot melt adhesive. Once the substrate is coated it will stick permanently to just about any surface including plastic, wood and metal. The machines will coat 30cms in 4 seconds and once processed the adhesive will not lose its tack so mounting does not have to be immediate. The adhesive will not transfer to fingers and is completely Non-Hazardous and Non Toxic. As it uses a special hot melt adhesive the machine is warm when running. But the heat will not affect inkjet or laser prints. The adhesive is supplied in pliable bags which can be added straight to the bath, bag included! The system is so simple it requires no daily or monthly maintenance either.
Based on the original 8x5 this new model has been developed to print onto thin paper up to beer mat thickness! It is the ideal small press for producing Invitation Cards, Greetings Cards, Menus, Place Cards, Business Cards, Social Stationery, Flyers, Labels, Envelopes, Napkins, Beer Mats, ...you name it!
AdanaLite UV 2219 Negative & Photopolymer Platemaker, 240v (max plate size 220 x 190mm) Uses pressure instead of vacuum to make contact with the negatives and polymer plates. Exposure area 220 x 190mm with a 15 minute auto digital timer. Ideal for making negatives, letterpress printing plates and hot-foiling plates. Thick Base Glass to produce a good quality pressure contact. Built in drawer for controlled post exposure for hardening plates. Moulded Mains Cable, 220/240v., AC., & Water Washout Brush included for the polymer plates.
The PS Series, Powdering Section range of machines were specifically developed as stand alone, fully automated powdering section units for the application of adhesive powders used by the heat transfer industry. Available in 38, 51, 76 and 104cm wide versions, each one features an exclusive moulded cast aluminium vacuum head which focuses the vacuum precisely to the substrate surface allowing for a crisp, clean product every time. It can operate independently offline or inline with high production presses. The variable vacuum control, which increases and decreases vacuum, will accommodate powder as fine as 60 microns and as coarse as 200, thereby allowing for a varied and wide range of designs and effects to be achieved.
Caslon Ltd will be exhibiting some unique products from their range of finishing and specialist equipment in Hall 12, stand D72. This includes machines for Digital foiling, Duplexing, Card cutting, Letterpress, Thermography, plate making and Die Stamping, all designed to add value and achieve the maximum profit available!