Manage stand orders
Select Option

PrintConcept Grafische Maschinen GmbH

Philipp-Jakob-Manz-Str. 18, 72664 Kohlberg
Germany
Telephone +49 7025 84330-0
Fax +49 7025 84330-40
office@printconcept-gm.de

This company is main exhibitor of

Location

  •   Hall 14 / A49

Our range of products

Product categories

  • 06  equipment / services / infrastructure
  • 06.01  Peripheral equipment
  • 06.01.075  Dust removing equipment for printing presses

Dust removing equipment for printing presses

  • 06  equipment / services / infrastructure
  • 06.01  Peripheral equipment
  • 06.01.140  Web cleaning systems

Web cleaning systems

  • 06  equipment / services / infrastructure
  • 06.01  Peripheral equipment
  • 06.01.205  Quality inspection systems

Quality inspection systems

  • 06  equipment / services / infrastructure
  • 06.01  Peripheral equipment
  • 06.01.250  Dryers

Dryers

  • 06  equipment / services / infrastructure
  • 06.01  Peripheral equipment
  • 06.01.270  IR dryers, infrared dryers

IR dryers, infrared dryers

Our products

Product category: Web cleaning systems

WEB CLEANING

The web cleaning system is usually installed shortly before the 1st printing unit, whereby the two manifolds are laterally offset. This ensures optimum cleaning of the front and back sides. Due to the direct contact especially the cut edges are cleaned. 

Another installation position is after the perforation, after the slitting knives, before a coating or application unit. 

More Less

Product category: IR dryers, infrared dryers

IR Modul Dry

Together with our technical partner we have developed our idea of a modular dryer system and brought it to market maturity.
 
  • The infrared dryer is designed as a modular cassette system.
  • Each dryer cassette is equipped with four short-wave emitters.
  • Through a reflector plate, the rear radiation is reflected evenly on the drying surface.
  • The lamp area is protected by a quartz plate and guide bars against the ingress of sheets or pieces of paper.
  •  The cooling air is led through the emitter area and fed to the inlet zone as hot process air for moisture absorption.
  • The quartz plate has only a temperature under 150 °C -> lower danger of fire.
  • The hot-air-nozzle makes effective process air available and helps cleaning the surface of the dryer from dust.
FUNCTIONS AND ADDITIONAL SAFETY DEVICES
  • The control takes place via a modern touch panel.
  • Each cassette can be controlled individually.
  • The power of each cassette can be infinitely adjusted from 0 - 100.
  • The emitters of each cassette are monitored. A failure is monitored.
  • The configuration of the dryer modules can be saved per job order.
  • A safety light curtain is looking sharp over the dryer element to detect board jams or pieces of paper on the dryer.
  • HD camera with monitor - the machine operator has all dryer units in view.
  • Power Drop Down - The dryer unit is automatically swung down when the machine stops, so that no sheets or pieces of paper can remain on the surface.

More Less

Product category: Quality inspection systems

COLOUR MANAGEMENT

WHY COLOUR MANAGEMENT
If your company wants to enter a more and more high quality market by printing on coated paper with inline varnishing, all influencing factors should have the right conditions:

  • Paper (printing on half coated or full coated paper limits the printing speed)
  • Anilox (the ink volume must be reduced from "brown" paper to coated paper)
  • Dies (the quality of dies also limits the speed)
  • Setting (the pressure of the printing cylinder must be reduced to a minimum)
  • Inks and varnishing (the quality of the inks and varnish mainly influence the printing; keywords: pigments, binder, rewetting, temperature, viscosity, PH-value)

More Less

About us

Company details

The company PrintConcept Grafische Maschinen GmbH was founded on 01 February 2006.

Already in 1996 the company PrintConcept GmbH had acquired the exclusive representation rights for the product Doyle web and sheet-fed cleaning systems from the manufacturer Doyle Systems  and is responsible for the countries:  

Germany, Austria, Switzerland, Benelux, England (Wales, Scotland, Ireland) Italy, France, Spain, Hungary, Czech Republic, Slovakia, Poland and Scandinavia.

  • We are a trading company with almost 25 years of experience.
  • With this know-how, we focus specifically on the needs and requirements of our customers. 
  • We supply the most diverse markets in the graphic arts industry.
  • Our products serve to ensure quality and increase productivity.  
  • Close cooperation with machine manufacturers and proximity to the end customer market. 
  • 500 installations in Europe.
  • Since the beginning of 2019 expansion of the product range in the field of IR drying, plate cleaning, colour control systems, moisture measurement. 

More Less