Lüscher Technologies AG of Oftringen at virtual.drupa in Düsseldorf -- drupa - April 20 to 23, 2021 - Messe Düsseldorf
Manage stand orders
Select Option

Lüscher Technologies AG

Industriestr. 17, 4665 Oftringen
Switzerland

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Contact

Peter Berner

CEO

Phone
+41 62 767 76 10

Email
pberner@luescher.com

Stefan Thulin

Vice President Sales

Phone
+41 62 767 76 12

Email
sthulin@luescher.com

Benedikt Strebel

Vice President Services & Operations

Phone
+41 62 767 76 01

Email
bestrebel@luescher.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.010  Printing forme producers
  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.015  Printing forme production for offset printing

Printing forme production for offset printing

  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.020  Computer to plate systems for offset printing

Computer to plate systems for offset printing

  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.050  Printing forme production for flexographic printing
  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.065  Computer to plate systems for flexo plates
  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.075  Printing forme production for screen printing
  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.085  Computer to screen systems
  • 04  future technologies
  • 04.01  Printed electronics
  • 04.01.015  Machines and equipment for organic and printed electronics

Machines and equipment for organic and printed electronics

Our products

Product category: Printing forme producers, Printing forme production for screen printing, Computer to screen systems

JetScreen! LT - High Tech CtS System with UV Lasers for Large Formats

Latest Generation
JetScreen! LT stands for an entirely new generation of CtS system using the same Swiss precision engineering and CtS know-how, but with state-of-the-art laser technology developed by Lüscher Technologies AG. This equipment sets new standards in digital imaging of printing screens and is available in various formats up to 5500 x 3200 mm.

Lüscher Trioptic!-System
Depending on the specific quality requirements, the desired resolution can be selected at the touch of a button. Be it 635, 1270, or 2540 dpi: the resolution is directly related to the output performance, thus JetScreen! LT always operates in optimal quality and speed range. As an option, some JetScreen! LT types are available with a resolution of up to 5080 dpi.

UV Laser Technology
The fiber-coupled laser diodes operate in the 405 nm range and are characterised by an ultra-long service life of more than 20’000 exposing hours. They are absolutely maintenance-free and are cooled by Peltier elements.

More Less

Product category: Printing forme producers, Printing forme production for flexographic printing, Computer to plate systems for flexo plates

XPose! FlexLine - The Revolution in Digital Flexo Plate Making

New Standard in Flexo Plate Making
More than 70 years of experience in machine construction and in the graphic industry have been brought into the design XPose! FlexLine. Precision engineering combined with state of the art laser technology with fiber-coupled laser diodes stands for the highest reliability in plate making and lowest cost in maintenance and operation of the equipment.

- fleXtreme! optic for multiple resolutions up to 5080 dpi
- Highest output standard in industrial applications with up to 4-5m2/h (43.1 - 53.8 ft2/h)*
- No loss of speed with any plate thickness up to 6.35 mm
- Easy loading and unloading
- Not depending on particular formats
- Fully automatic calibration during exposure
- Also suitable for letterpress / dry offset plates

More Less

Product category: Computer to plate systems for offset printing, Printing forme producers, Printing forme production for offset printing, Printing forme production for flexographic printing, Computer to plate systems for flexo plates, Printing forme production for screen printing, Computer to screen systems, Machines and equipment for organic and printed electronics

MultiDX! - The All-Rounder for High Demands

New Layout
With MultiDX! 320 and 340 we have enhanced and equipped our flatbed imagesetter with state-of-the-art technology. The most important feature of the new layout is the fact that the MultiDX! 320 can be equipped with twice the amount of lasers.

Maximum Productivity
Due to its flatbed layout, almost any flexible and inflexible printing form can be imaged in the highest quality at a resolution of up to 10’160 dpi. And doubling the number of lasers means increasing productivity by 100%.

Steady Exposure Quality
Prior to every exposure, a laser sensor checks all lasers and readjusts them if necessary. This guarantees an absolutely steady quality during the entire exposure. And prior to every exposure, the dynamic autofocus system compensates for any unevenness of the plate material during the exposure by measuring the plate material and by calibrating the optics accordingly.

More Less

Company news

Date

Topic

03 Mar 2021

Experience a live demonstration at Lüscher’s new demo and training center

In our new demo and training center in Oftringen, Switzerland, we are pleased to present to you our latest Computer-to-Screen (CtS) and Computer-to-Plate (CtP) systems.

Request either a general presentation, tailored to your particular needs, or ask for a demo where we process your own material for your preferred application. Subsequently, the material will be returned to you for internal evaluation and testing.

Even if you are currently unable to travel due to the circumstances, be assured that we are here for you: We can offer you a live video demo on MS Teams.

Are you interested? We look forward to welcoming you at our premises in Switzerland or at a live online session.

More Less

03 Apr 2020

Lüscher Technologies and Daetwyler Graphics move into a new building in Oftringen

In February 2020, Daetwyler Graphics and Lüscher Technologies relocated from their existing headquarters in Bleienbach to Oftringen with its excellent transportation links.

Taking just 12 months to complete, the companies’ new home boasts a 3’200 m² assembly hall and around 3’000 m² of offices and staff areas. The four-story building has the perfect layout for efficient process and production workflows, offering ideal, state-of-the-art working conditions for employees in all Areas.

“We’ve created the best possible conditions here to produce our equipment extremely efficiently. This move is a clear and logical step into the future for both companies,” says Dr. Rolf Pfiffner, CEO of Daetwyler Graphics AG.

More Less

About us

Company portrait

Lüscher Technologies AG
Quality, Reliability and Innovation

Originating from a small family business with products for the textile and the Graphic Arts industry, we have continuously extended our product portfolio and have been delivering excellent performance for more than 70 years for various industrial applications. To our international customers, we offer innovative technical solutions, custom-made equipment, and excellent services.

As of 2013, we manufactured technologically outstanding imaging systems for various printing technologies in Bleienbach. Always on the lookout for new fields of applications for our state-of-the-art technology, we keep expanding our business.

About 30 employees are working in a typical SME structure. Since May 2016, we are integrated into the Heliograph Holding Group, mutually benefiting from the network and the synergies. International distribution of our products and after-sales service is taken care of by us directly or by our distribution partners in more than 60 countries.

We have been operating from our new building in Oftringen since march 2020.

Company data

Number of employees 20-49
Foundation 2013