Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
Please log in
You must be logged in to send the contact request.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
The versatile Roll-to-Roll laboratory platform for printing, coating and laminating: Quick adjustment of modular coating systems.
The Smartcoater is a unique laboratory machinery that can reproduce complex processes in a variable compact form. The Smartcoater is suitable for experienced users and newcomers to coating, printing and laminating technologies.
With working widths up to 300 mm, standardised assemblies and a modular layout the Smartcoater is a fast, cost-effective laboratory or small pilot production tool.
The Smartcoater can delivery complex products with a minimal use of substrates and chemicals and a short setup time.
More than thirty modular coating and printing systems can be quickly and easily mounted. Technologies including inkjet can be exchanged using a Plug&Play system and any number of 1,000 mm dryer systems can be used. From electrically heatable dryers, NIR and infrared to UV-crosslinked systems, the Smartcoater can be fitted with the systems of your choice.
Both wet and dry lamination can be used and corona pre-treatment, web cleaning and systems for web edge control can be integrated.
Precise tension regulation, in the single-digit newton range, can be maintained using measuring rollers. Accurate start-up curves allow the use of very thin or tension-sensitive materials.
A wide range of options and equipment possibilities allow our customers to configure their optimum plant configuration.
In a standard version for technology newcomers the Smartcoater can be fitted with a 5-in-1 coating system.
The Smartcoater, like all Coatema laboratory systems and pilot machines, can be tested at the Coatema R&D centre in Dormagen, Germany.
Coating and laminating on a small scale: Precision Sheet-to-Sheet and Roll-to-Roll processing. Research and Development tools with a budget in mind.
The Test Solution S2S and R2R are compact, versatile, cost-oriented Coatema tools for single sheets and Roll-to-Roll processing. The small piece good machines enable doctor blade and slot die processes for coating.
The Test Solution S2S with a motor-driven precision granite table and a small, efficient touch panel control system, makes for a very cost-effective, high-quality entry point for coating on DIN A4 size.
The Test Solution R2R is a compact Roll-to-Roll tool with a working width of 100 mm. It comes standard with a doctor blade and electrically heated dryer. It can be fitted with a modular slot die and other advanced coating, curing and a laminating system. Standard equipment includes a touch panel control unit. This the smallest Coatema Roll-to-Roll coating machine. Details can be provided on a customer-request basis.
For Sheet-to-Sheet coating: The Easycoater (third generation) is a discontinuous high-tech coating machine for Sheet-to-Sheet coating.
The Easycoater is designed to produce high quality products or samples in DIN A4 up DIN A0 quickly and reliably. A slot die, doctor blade, and flat screen-printing unit are available and many additional coating systems can be integrated.
The Easycoater is controlled by a Siemens S7 PLC processer and can create samples or small production quantities of products using various coating and printing methods. The plant is easy to use and offers an electrically heated dryer as standard and optional UV/infrared units. The Easycoater is fully encapsulated and is available in an EEx design. Source extraction is available in the coating area and a glove box configuration with an inert atmosphere is also possible.
Both the ultra-precise granite coating table in the vacuum table variant and the modular holder for the doctor blade and slot die can be motorized. The table movement under the coating system and then under the dryer can be defined in advance, enabling the drying cycle to be precisely regulated and repeated. If the motorized coating gap adjustment option is chosen, an adjustment in the 1µ range is possible. High precision, in every function, allows usage in technologies requiring top accuracy and consistence.