Wuxi Newbinder Technology Co., Ltd

UV coating is a prints finishing process whereby a polymer resin changes from a liquid to a solid under ultraviolet(UV) light source. UV coating can be a direct replacement for lamination and provides a protective covering that adds value to any document, increasing the vibrancy and richness of its colours , providing protection from scratching and fingerprints.

The XDC400A/XDC800A UV & Aqueous flood coater machine is newly designed and made by Yutian Xindecheng Printing Machinery Co., Ltd.

UV coating, Aqueous coating and Primer coating applications in one machine.

Modular feeder and coater, modular UV lamp house and IR lamp house

Offline and inline designs.

 

Features:

It is good for digital printings, short-run color printings, PVC card, plastic media, paper pre-printing coating for HP Indigo, water-base and solvent inkjet printings etc. 

The coating will make the printings more bright and endurable, and can be waterproof, heatproof and anti-sunshine.

It is the good option for both offset printing and digital printings.

It can do UV coating, Water-base coating, primer coating.

Modular feeder and coater, modular UV lamp house and IR lamp house.

Suitable for inline and offline applications.

Automatic feeding through air suction feeder with front pick-up, advanced technology and stable performance, good for thin media and thick media.

Automatic coating supply with fluid pump, and recycle with hose.

Auto stop for over heat, good temperature control, air cooling system.

E-stop safety and limit switch device.

One UV lamp, three IR lamp. IR lamp power is adjustable.

Easy adjustment, low maintenance.

Low noise, small location, modern design, advanced technology.

 

Specifications:

 

XDC400A UV FLOOD COATER

 Model No.: XDC400A

Min. Paper size: 210x300mm

Max. paper size: 400x530mm

Paper thickness： 157~600gsm

Max. coating speed: 35m/min.

Power supply: 380V 50Hz 3Phase 9Kw

Total weight: 780Kgs

Dimension: 2600x1080x1000mm

 

XDC800A UV FLOOD COATER

 Model No.: XDC800A

Min. Paper size: 210x300mm

Max. paper size: 760x630mm

Paper thickness: 157~600gsm

Max. coating speed: 35m/min.

Power supply: 380V 50Hz 3Phase 13Kw

Total weight: 1050Kgs

Dimension: 2600x1650x1000mm

The XDC400A/XDC800A Automatic UV & Aqueous flood coating machine is newly designed and made by Yutian Xindecheng Printing Machinery Co., Ltd.
Modular feeder and coater, modular UV lamp house and IR lamp house
Suitable for inline and offline applications

Features:

• It is good for digital printings, short-run color printings, PVC card, plastic media, paper pre-printing coating for HP Indigo, water-base and solvent inkjet printings etc. 
• The coating will make the printings more bright and endurable, and can be waterproof, heatproof and anti-sunshine.
• It is the good option for both offset printing and digital printings.
• It can do UV coating, Water-base coating, primer coating.
• Modular feeder and coater, modular UV lamp house and IR lamp house.
• Suitable for inline and offline applications.
• Automatic feeding through air suction feeder with front pick-up, advanced technology and stable performance, good for thin media and thick media.
• Automatic coating supply with fluid pump, and recycle with hose.
• Auto stop for over heat, good temperature control, air cooling system.
• E-stop safety and limit switch device.
• One UV lamp, three IR lamp. IR lamp power is adjustable.
• Easy adjustment, low maintenance.
• Low noise, small location, modern design, advanced technology.

Specifications:
XDC400A UV FLOOD COATER
 Model No.: XDC400A
Min. Paper size: 210x300mm
Max. paper size: 400x530mm
Paper thickness： 157~600gsm
Max. coating speed: 35m/min.
Power supply: 380V 50Hz 3Phase 9Kw
Total weight: 780Kgs
Dimension: 2600x1080x1000mm

XDC800A UV FLOOD COATER
 Model No.: XDC800A
Min. Paper size: 210x300mm
Max. paper size: 760x630mm
Paper thickness: 157~600gsm
Max. coating speed: 35m/min.
Power supply: 380V 50Hz 3Phase 13Kw
Total weight: 1050Kgs
Dimension: 2600x1650x1000mm

The XDC330R UV & Aqueous web coater machine is newly designed and made by Yutian Xindecheng Printing Machinery Co., Ltd.
Roll to roll UV coating and primer coating application
Cold UV curing
High speed

Features:

• The XDC330R UV & Aqueous roll to roll coater system that is developed and produced by Xindecheng, covers prints with a specially formulated UV Varnish or water-base varnish and allows to achieve a bright or matte finish to the roll material such as labels, paper, plastic media etc.
• UV lamp house with shutter and quartz glass which is essential to web coating.
• Modular UV lamp house and IR lamp house.
• Six IR lamps for drying water-base varnish specially designed for web primer coating application machine.
• Automatic coating supply with fluid pump, and recycle with hose.
• The varnish finish will produce more durable labels and give more resistance to water, solvents and frequent use.
• The varnish finish will enhance the printing colors and quality and bring more value to the job.
• Unwinding and rewinding with air shaft to hold the paper reel.
• PLC control, touch screen operation mode.
• High speed, modern design, advanced technology.
• Single side coating.  Double sie coating machine is available too.
• Option: anilox roller, web guide and corona treatment.

Specifications:
XDC330R ROLL TO ROLL UV COATER
Model No.: XDC330R
Max. Web width: 330mm
Max. coating speed: 40m/min.
Paper thickness: 80~600gsm
Loading reel diameter: 500mm
UV lamp: 4Kw*1pc
IR lamp: 0.8Kw*6pcs
Power supply: 380V 50Hz 3Phase 10.8Kw
Weight: 450Kgs
Dimension: 2700x1000x1200mm

The XDC400/XDC800 manual UV & water-base roller coater machine is newly designed and made by Yutian Xindecheng Printing Machinery Co., Ltd.
Manual feeding, modular UV lamp house and IR lamp house
Suitable for inline and offline applications

Features:

• XDC400/XDC800 manual feeding UV flood coater machine is good for digital printings, short-run color printings, PVC card, plastic media, paper pre-printing coating for HP Indigo, water-base and solvent inkjet printings etc. 
• The coating will make the printings more bright and endurable, and can be waterproof, heatproof and anti-sunshine.
• It is the good option for both offset printing and digital printings.
• It can do UV coating, Water-base coating, primer coating.
• Modular UV lamp house and IR lamp house.
• Suitable for inline and offline applications.
• Manual feeding and can add separate feeder later to convert into automatic feeding model.
• Automatic coating supply with fluid pump, and recycle with hose.
• Auto stop for over heat, good temperature control, air cooling system.
• E-stop safety and limit switch device.
• One UV lamp, three IR lamp. IR lamp power is adjustable.
• Easy adjustment, low maintenance.
• Low noise, small location, modern design, advanced technology.

Specifications:
XDC400 FLAT UV COATER
 Model No.: XDC400
Max. Paper width: 400mm
Paper thickness: 157~1000gsm
Max. coating speed: 35m/min.
Power supply: 380V 50Hz 3phase 7Kw
Weight: 500kgs
Dimension: 2100x1080x1000mm

XDC800 FLAT UV COATER
Model No.: XDC800
Max. Paper width: 760mm
Paper thickness: 157~1000gsm
Max. coating speed: 35m/min.
Power supply: 380V 50Hz 3phase 10Kw
Weight: 580kgs
Dimension: 2100x1650x1000mm

This XDC390P Roller Primer coating machine is designed for A3+ HP Indigo press by Yutian Xindecheng Printing Machinery Co., Ltd.
Five IR lamps to dry the primer quickly.
Good option for Indigo preprinting treatment.

Features: 

• This Primer Coating Machine is designed on basis of Ming Station Pro XDC390A, mainly for Indigo primer coating.
• Automatic feeding through air suction feeder with top pick-up, advanced technology and stable performance. 20cm high loading quantity.
• Easy adjustment, convenient operation.
• Automatic coating supply, and recycle with hose.
• Auto stop for over heat, good temperature control, air cooling system
• E-stop safety and limit switch device
• Six IR lamps drying system, power of IR lamp is adjustable.
• Other size primer coating machines are available.
• Roller to roll primer coater machines are available.
• Good coating quality, stable performance
• Low noise, small location, modern design, advanced technology
• Optional devices: corona treatment, air knife, web guide etc.

Specifications: 
Model No.: XDC390P, Primer Coater Machine
Paper Thickness: 157-300g/m2 (may vary according to paper quality)
Max. Paper Width: 410mm
Coating speed: 25m/min. (may vary according to paper size)
Power Supply: 220V 50Hz 4.5KW
Total Weight: 255kgs
Dimension: 2280×785×1010mm

The XDC520E UV & Water-base coater machine is made by Yutian Xindecheng Printing Machinery Co., Ltd.
An entry-level model.
Low cost and simple operation design.

Feature:

• This flat UV Coating Machine XDC520E is designed for digital printings, short-run color printings, PVC card, paper pre-printing coating for HP Indigo, water-base and solvent inkjet printings etc and specially for graphic album finishing.
• The coating will make the printings more bright and endurable, and can be water-proof, heat-proof and anti-sunshine.
• It can do UV coating, Water-base coating, pre-printing primer coating.
• Low maintenance, easy set handles, preheat IR lamps before UV.
• Vacuum hold down to ensure of safety paper delivery.
• Easy adjustment, convenient operation.
• Automatic coating supply, and recycle with hose.
• Auto stop for over heat, good temperature control, air cooling system.
• E-stop safety and gurad cover with limit switch device.
• Jogging and reverse running is available.
• One UV lamp, three IR lamp. IR lamp power is adjustable steplessly.
• Good coating quality, stable performance.
• Low noise, small location, modern design, advanced technology.

Specifications:
Model No.: XDC520E, entry model Flat UV Coater
Paper Thickness: 157-600g/m2 (may vary according to paper quality)
Max. Paper Width: 520mm
Coating speed: 20m/min. (may vary according to paper size)
Power Supply: 220V 50Hz 5.3KW
UV lamp power: 3Kw
IR lamp power(3): 1.8Kw
Total Weight: 200kgs
Dimension: 1600×1000×1000mm
Package dimension: 740x870x1150mm

China first model of LED UV Coating machine developed by Yutian Xindecheng Printing Machinery Co., Ltd.
Low power consumption and environment-friendly.
Safe and cold UV curing in LED UV Coater machine.

Features:

• This high speed LED UV Flood Coater Machine is designed on basis of traditional UV Coating machine Ming Station Pro XDC390A.
• LED UV lamp for low power consumption, low temperature inside machine and safety.
• LED UV lamp wave is 395nm. Other wave options such as 385nm/365nm are available.
• Compatible with digital printings, offset printings, inkjet printings.
• Automatic feeding through air suction feeder with top pick-up, advanced technology and stable performance. 20cm high loading quantity.
• Easy adjustment, convenient operation.
• Automatic coating supply, and recycle with hose.
• E-stop safety and limit switch device.
• Small location for office use and print-shop use.

Specifications:
Model No.: LED360A, LED UV Coating Machine
Paper Thickness: 157-300g/m2 (may vary according to paper quality)
Max. Paper Width: 360mm
Coating speed: 20m/min. (may vary according to paper size)
Power Supply: 220V 50Hz 2.3KW
Total Weight: 165kgs
Dimension: 1020×735×890mm

The JetTouch B2 Digital Inkjet Spot UV Coater with Cold Foil is an updated model on basis of first generation Digital Spot UV Coater with Cold Foil machine shown in Print China 2017 Beijing. We have updated the camera registration system and more applicable varnish.
We have finalized the camera registration system and make sure of high printing precision on a mass production level. The registration system works very well for offset printings and digital printings.
Varnish is an important factor in this Inkjet Spot UV Coater project and after long time of experiment and test, we have chosen the final formula of varnish, suitable for the inkjet heads, paper and foil.
Without making any plate or die, you can do spot UV directly from the computer to the printings.
And its cold foil station can do foil stamping digitally, easy fast and without any waste, bringing touchable shining effect.
With our JetTouch B2, make your value “Touchable” and make your dream “Affordable”.

Features:
Powerful software
JetTouch B2 uses 21’’ touch screen and accessible software to ensure that you can switch between different jobs easily and quickly. Users can make balance between the cost and coating thickness easily.
Digital spot coating with 3D effect
The spot coating requires no screen or plate and it can do variable data coating digitally. The raised 3D effect adds value to your printings and differentiates your brand from others. The eye-attracting finishes will bring more customers and profit.
Cold foil stamping digitally
The cold foil stamping requires no film or dies, and allows foil stamping with variable data from one sheet to thousands of sheet in digital process. The stamping result is as good as traditional hot stamping. The shining effect is another feature to make your printings unique and profitable.
UV Curing
JetTouch B2 uses integrated UV curing system for instant drying. Sheets are completely dry before entering the stacker and can be further processed.
Registration with camera
JetTouch B2 uses camera to ensure that the sheets are adjusted in dynamic condition and positioned perfectly before coating.
Vast applications
From magazine covers, books, brochures, labels to invitation cards and packaging, it provides spot coating and foil stamping in one pass on offset printings or digital printings, and brings service and benefits to your customers in short run and long run.

Specifications:
Model No.: JetTouch B2 Digital Embellishment Equipment
Coating Technology: 
Empty the air and spray the coating for preparation before UV coating.
Spot Coating and/or Cold Foil stamping continually.
Inkjet heads move to seal covers for protection, avoid light and dust.
Coating Thickness:  Depending on the paper and file requirement, the coating thickness can vary from thinnest 20microns to thickness 100 microns.
Coating Speed: Maximum 3000 SPH of B2 sheet or 36m/min. (May vary according to different coating thickness.)
Registration system: Automatic registration with camera or mechanical registration with sensors.
Registration precision: +/-200 microns
Paper size: 
Min.: 320x464mm
Max.: 520x750mm
Max. Coating area: Up to 500x750mm
Printings thickness:
Min.: 175gsm
Max.: 450gsm
Automatic feeder: Max. loading height is 800mm
Automatic stacker: Max. collecting height is 800mm
Power supply: 380V 50Hz 17.5Kw
Dimensions: 7500x1400x1800mm
Weight: 2600kgs

3D varnish, fancy touching feel
Digital enhancement equipment: without making any plate or die, you can do spot UV directly from the computer to the printings.
And its cold foil station can do foil stamping digitally, easy fast and without any waste, bringing touchable shining effect.
With our JetTouch A3+ Inkjet Varnish Spot UV Coater with cold foil function, make your value “Touchable” and make your dream “Affordable”.

Features:
Powerful software
JetTouch A3+ Digital Inkjet Spot UV Coater with Cold Foil station uses 21’’ touch screen and accessible software to ensure that you can switch between different jobs easily and quickly. Users can make balance between the cost and coating thickness easily.
Digital spot coating with 3D effect
The spot coating requires no screen or plate and it can do variable data coating digitally. The raised 3D effect adds value to your printings and differentiates your brand from others. The eye-attracting finishes will bring more customers and profit.
Cold foil stamping digitally
The cold foil stamping requires no film or dies, and allows foil stamping with variable data from one sheet to thousands of sheet in digital process. The stamping result is as good as traditional hot stamping. The shining effect is another feature to make your printings unique and profitable.
UV Curing
JetTouch A3+ uses integrated UV curing system for instant drying. Sheets are completely dry before entering the stacker and can be further processed.
Registration with camera
JetTouch A3+ uses camera to ensure that the sheets are adjusted in dynamic condition and positioned perfectly before coating.
Vast applications
From magazine covers, books, brochures, labels to invitation cards and packaging, it provides spot coating and foil stamping in one pass on offset printings or digital printings, and brings service and benefits to your customers in short run and long run.

Specifications:
Model No.: JetTouch A3+, Inkjet Spot UV Coating Machine and Cold Foiling Machine
Coating Technology: 
Empty the air and spray the coating for preparation before UV coating.
Spot Coating and/or Cold Foil stamping continually.
Inkjet heads move to seal covers for protection, avoid light and dust.
Coating Thickness: Depending on the paper and file requirement, the coating thickness can vary from thinnest 20microns to thickness 100 microns
Coating Speed: Maximum 3000 SPH of A4 sheet or 19m/min. (May vary according to different coating thickness.)
Registration system: Automatic registration with camera or mechanical registration with sensors.
Registration precision: +/-200 microns
Paper size:
Min.: 210x297mm
Max.: 370x645mm
Max. Coating area:  Up to 350x645mm
Printings thickness: 
Min.: 175gsm
Max.: 450gsm
Automatic feeder: Max. loading height is 200mm
Power supply: 380V 50Hz 14Kw
Dimensions: 3300x1200x1800mm
Weight: 980kgs

Ad and sign industry grow very rapidly which can be seen from the appearance of more and more large format inkjet printer manufacturers.
Ad and signage printings such as flex banner, poster, vinyl sign, lightbox sign, shopfront sign, footpath signs, road signs, kerb sign, car wrap stickers etc., can be treated by UV coating finish to stand outdoor temperature and moisture and also long time usage.

We provide the web liquid laminating machine for such ad and signage applications to enhance the printing and protect the outdoor printing use.

Large format Web liquid laminating Machine
It is good for wide format and thick material coating in high speed.  
It can be used for both sheet material and roll material.
Independent unwinding system and rewinding system.
One UV lamp and three IR lamps
Cold UV curing system design with shutter
Max. web wdith: 1600mm and optional size
Max. coating speed: 25m/min