TECTUPRINT SL of Sant Quirze Del Vallés (Barcelona) at virtual.drupa in Düsseldorf -- drupa - April 20 to 23, 2021 - Messe Düsseldorf
Manage stand orders
Select Option

TECTUPRINT SL

ZI Casablancas, C/Empordà, 29, 08192 Sant Quirze Del Vallés (Barcelona)
Spain
Telephone +34 937 221664
Fax +34 937 310588
info@tectuprint.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Contact

Josep Cánovas

Phone
+34690853445

Email
j.canovas@tectuprint.com

Cesar Barajas

Phone
+34653673248

Email
cesar@tectuprint.com

Isaac Jiménez

Phone
629743711

Email
maquinariayequiposgraficos@gmail.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 01  prepress / print
  • 01.07  Web-fed offset printing machines
  • 01.07.015  Continuous stationery printing machines

Our products

Product category: Continuous stationery printing machines

Stacker 520 ST

This 520 DP-, is designed to work with non-perforated paper in continuous line. The speed of the unit is controlled by a dancer. The document then passes the piercing section where the cross bones, and (optionally) vertical holes are added.

Designed to be connected to Digital Printers and integrated into “finishing on demand” applications: the Dynamic Perf. Are able to make cross and length dynamic perforations, variable on the sheet.

Each perforation is separately controlled independently by reading an optical cell.
The drilling position is doubled, is equipped with cylinders of variable size, from 11 "to 14", allowing to produce perforations on one side in position 1 and position 2 can produce perforations on the other side independently. The perforator cylinders are either horizontal magnetic type for steel plates or conventional type cutting pipe character, which are mounted in supports rapid change. Vertical perforations for continuous drilling is done in a separate position on the inlet side of the unit and can be equipped with any number of wheels drills, for drilling vertical selective recommended magnetic plates.

Each horizontal drilling is controlled separately by reading marks on the edge of the paper in a free field.

More Less

Product category: Continuous stationery printing machines

MultiCut MU-520

Is a variable module output level, designed to be adaptable to the vast majority of rotating machinery market, with new generation of digital software, allows you to vary the cut in the format needed, to beams of a cell reading.

This cut will be in size from 8 "to 24" variable, with the possibility of flying cutting, allowing as speeds, we can make different cutting formats without changing the cylinder.

The flying cutting, makes the cutting cylinder, stays at rest while the paper moves and when the signal comes, the cylinder speeds to make the cut.

The feed may be via paper web continuously, with tension, or by drag (tractors) and even without tension by a dancer allowing, place the cutter to the output from any Collector, Continues or Rotary Offset machines.

The dancer girders connection or encoder is fast and accurate, and position changes in different lines are a matter of few minutes, allowing having this equipment according to the needs of manufacturing.

The output of the court toward the tee, sometimes served in a High pile stack.
The drilling position is doubled, is equipped with cylinders of variable size, from 11 "to 14", allowing to produce perforations on one side in position 1 and position 2 can produce perforations on the other side independently. The perforator cylinders are either horizontal magnetic type for steel plates or conventional type cutting pipe character, which are mounted in supports rapid change. Vertical perforations for continuous drilling is done in a separate position on the inlet side of the unit and can be equipped with any number of wheels drills, for drilling vertical selective recommended magnetic plates.

Each horizontal drilling is controlled separately by reading marks on the edge of the paper in a free field

More Less

Product category: Continuous stationery printing machines

Star Cut 520

The machine allows to cut from reel to sheet. The electronic gear allows cut any size and adpats to the register mark by the tactile touch screen.
Speed is taken from the Host System by means of an encoder or dancer.
It can be moved very easly from one to another one machine in a few minuts.

More Less

Product category: Continuous stationery printing machines

STAR CUT 520

The electronic edge allows cutting any size and adapts to the register mark by the tactile touch screen.
The spped is taken from the host system by means of an encoder or dancer. 
It ca be moved easly from one to another one machine in a few minuts

Maximum web width: 520 mm ( 20")
Minimum web width: 200 mm ( 8")
Paper weight: 60 - 180 g/m2
Variable size: 6-16 "
Double cut from 12" to DIN A4 format
Maximal speed : 180 m/min ( 160 with a double cut )

More Less

About us

Company portrait

Now, arrive new times and new needs that make us develop new concepts and new ways of producing and printing finishes, we are specialists in providing finishing lines, peripheral equipment for offset printing industry and adding digital web finishing components , cutting, stacking, processing, infeed and perforation units are, some of the modules that we develop, but also manufacture digital heads holders groups and transport paper groups.
With a staff of 12 workers, very agile and flexible with a good investment in R & D.
We have representatives in different countries we also, TECTUPRINT is fully aimed at the modernization and adaptation to the needs of each client.