Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG
Postfach 1220,
65702
Hofheim am Taunus
Hattersheimer Str. 25, 65719 Hofheim am Taunus
Germany
Hattersheimer Str. 25, 65719 Hofheim am Taunus
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
We keep in touch
23 Apr 2021
Topics
14:00 ‐ 14:30
Cutting Without Set-Up Times
https://events.drupa.de/de/veranstaltung/cutting-without-set-up-times
Our range of products
Product categories
- 01 prepress / print
- 01.02 Workflow and data handling software
- 01.02.050 CIP4 applications
CIP4 applications
- 01 prepress / print
- 01.02 Workflow and data handling software
- 01.02.065 JDF applications
JDF applications
- 01 prepress / print
- 01.03 Software
- 01.03.030 Production and machine data processing
Production and machine data processing
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.010 Cutting machines and cutting systems
Cutting machines and cutting systems
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.015 Loading and unloading devices for high-speed cutting machines and cutting systems
Loading and unloading devices for high-speed cutting machines and cutting systems
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.025 Rear table loading
Rear table loading
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.035 Laser cutting machines
Laser cutting machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.040 Multiple-up cutting machines
Multiple-up cutting machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.045 Paper sheet counting machines
Paper sheet counting machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.060 Jogging tables and automatic jogging machines
Jogging tables and automatic jogging machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.065 High-speed cutting machines
High-speed cutting machines
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.075 Pile lifting devices
Pile lifting devices
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.210 Three-knife trimmers
Three-knife trimmers
- 03 post press / converting / packaging
- 03.01 Bookbinding machines and print finishing machines
- 03.01.375 Automatic die-cutters
Automatic die-cutters
- 03 post press / converting / packaging
- 03.03 finishing
- 03.03.040 Banding/banderoling machines
Banding/banderoling machines
- 03 post press / converting / packaging
- 03.03 finishing
- 03.03.045 Label cutting machines
Label cutting machines
- 03 post press / converting / packaging
- 03.03 finishing
- 03.03.050 Label die-cutting machines
Label die-cutting machines
- 06 equipment / services / infrastructure
- 06.19 Infrastructure
- 06.19.120 Pile turners
Pile turners
Our products
Product category: Three-knife trimmers
POLAR BC 330
Variable size bookcutter with 18.5" touch screen display
The robust and cross-linkable three-knife trimmer POLAR BC 330 is the latest development for the automatic trimming of perfect-bound or saddle-stitched products (e.g. books) and, in contrast to other three-knife trimmers, operates with only one knife.
For increased performance, several products can be cut simultaneously, stacked on top of each other.
The BC 330 is operated via an ergonomically arranged 18.5" touch screen display.
Recurring cutting dimensions can be saved and adjusted at any time.
The machine can be equipped with a barcode reader to automatically start the cutting program. This reduces set-up times to almost zero.
The robust and cross-linkable three-knife trimmer POLAR BC 330 is the latest development for the automatic trimming of perfect-bound or saddle-stitched products (e.g. books) and, in contrast to other three-knife trimmers, operates with only one knife.
- Integration into the digital workflow
- Variable format from product to product
- Easy knife change with automatic cut-off at bottom dead center and fine adjustment from the front
- Minimal maintenance due to the use of new materials
For increased performance, several products can be cut simultaneously, stacked on top of each other.
The BC 330 is operated via an ergonomically arranged 18.5" touch screen display.
Recurring cutting dimensions can be saved and adjusted at any time.
The machine can be equipped with a barcode reader to automatically start the cutting program. This reduces set-up times to almost zero.
Product category: Cutting machines and cutting systems
POLAR D 56
Programmable entry-level model for digital prints up to SRA3
POLAR D 56 cutting machines (also known as guillotine cutters, stack cutters or paper cutters in the graphic arts industry) are the robust, programmable cutting machines with hydraulic drive.
In addition to the uncomplicated operation, companies and machine operators appreciate the long service life of the cutting machine. The special cutting precision is due to the robust design and the direct dimensional cutting.
Cutting machine D 56 ECO:
The cutting machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and additional flat input keyboard. Recurring cutting sequences can be stored in one of the 198 available memory locations and adjusted at any time.
Cutting machine D 56 PLUS:
The cutting machine is operated via an 18.5" touchscreen display. For recurring cutting sequences, 1,998 memory locations are available. With the process visualization, material handling is graphically displayed to the operator and the risk of errors during cutting is significantly minimized
Optionally, the machine can be integrated into the digital workflow with Compucut®.
POLAR D 56 cutting machines (also known as guillotine cutters, stack cutters or paper cutters in the graphic arts industry) are the robust, programmable cutting machines with hydraulic drive.
In addition to the uncomplicated operation, companies and machine operators appreciate the long service life of the cutting machine. The special cutting precision is due to the robust design and the direct dimensional cutting.
Cutting machine D 56 ECO:
The cutting machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and additional flat input keyboard. Recurring cutting sequences can be stored in one of the 198 available memory locations and adjusted at any time.
Cutting machine D 56 PLUS:
The cutting machine is operated via an 18.5" touchscreen display. For recurring cutting sequences, 1,998 memory locations are available. With the process visualization, material handling is graphically displayed to the operator and the risk of errors during cutting is significantly minimized
Optionally, the machine can be integrated into the digital workflow with Compucut®.
Product category: Cutting machines and cutting systems
POLAR D 66
Robust cutting machine with up to 67 cm cutting width
POLAR D 66 cutting machines (also known as guillotine cutters, stack cutters or paper cutters in the graphic arts industry) are the robust, programmable cutting machines with hydraulic drive.
In addition to the uncomplicated operation, companies and machine operators appreciate the long service life of the cutting machine. The special cutting precision is due to the robust construction and the direct dimensional cutting.
Cutting machine D 66 ECO:
The machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and additional flat input keyboard. Recurring cutting sequences can be stored in one of the 198 available memory locations and adjusted at any time.
Cutting machine D 66 PLUS:
The cutting machine is operated via an 18.5" touch screen display. For recurring cutting sequences, 1,998 memory locations are available. With the process visualization, material handling is graphically displayed to the operator and the risk of errors during cutting is significantly minimized
Optionally, the machine can be integrated into the digital workflow with Compucut®.
POLAR D 66 cutting machines (also known as guillotine cutters, stack cutters or paper cutters in the graphic arts industry) are the robust, programmable cutting machines with hydraulic drive.
In addition to the uncomplicated operation, companies and machine operators appreciate the long service life of the cutting machine. The special cutting precision is due to the robust construction and the direct dimensional cutting.
Cutting machine D 66 ECO:
The machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and additional flat input keyboard. Recurring cutting sequences can be stored in one of the 198 available memory locations and adjusted at any time.
Cutting machine D 66 PLUS:
The cutting machine is operated via an 18.5" touch screen display. For recurring cutting sequences, 1,998 memory locations are available. With the process visualization, material handling is graphically displayed to the operator and the risk of errors during cutting is significantly minimized
Optionally, the machine can be integrated into the digital workflow with Compucut®.
Product category: Cutting machines and cutting systems
POLAR D 80
Hydraulic top model with 80 cm cutting width
POLAR D 80 cutting machines (also known as guillotine cutters, stack cutters or paper cutters in the graphic arts industry) are the robust, programmable cutting machines with hydraulic drive.
In addition to the uncomplicated operation, companies and machine operators appreciate the long service life of the cutting machine. The special cutting precision is due to the robust design and the direct dimensional cutting.
Cutting machine D 80 ECO:
The machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and additional flat input keyboard. Recurring cutting sequences can be stored in one of the 198 available memory locations and adjusted at any time.
Cutting machine D 80 PLUS:
The cutting machine is operated via an 18.5" touchscreen display. For recurring cutting sequences, 1,998 memory locations are available. With the process visualization, the material handling is graphically displayed to the operator and the risk of errors during cutting is significantly minimized.
Optionally, the machine can be integrated into the digital workflow with Compucut®.
POLAR D 80 cutting machines (also known as guillotine cutters, stack cutters or paper cutters in the graphic arts industry) are the robust, programmable cutting machines with hydraulic drive.
In addition to the uncomplicated operation, companies and machine operators appreciate the long service life of the cutting machine. The special cutting precision is due to the robust design and the direct dimensional cutting.
Cutting machine D 80 ECO:
The machine is operated via an ergonomically arranged control panel with 5.5" monochrome display and additional flat input keyboard. Recurring cutting sequences can be stored in one of the 198 available memory locations and adjusted at any time.
Cutting machine D 80 PLUS:
The cutting machine is operated via an 18.5" touchscreen display. For recurring cutting sequences, 1,998 memory locations are available. With the process visualization, the material handling is graphically displayed to the operator and the risk of errors during cutting is significantly minimized.
Optionally, the machine can be integrated into the digital workflow with Compucut®.
Product category: High-speed cutting machines
POLAR N 78
The classic entry-level model with a cutting width of 78 cm
The 11th generation of POLAR high-speed cutters starts with the POLAR N 78 and is characterized in particular by the future-oriented platform for easy network integration and the proven technology with a new design.
The high-speed cutter N 78 is available in three equipment variants.
High-speed cutter N 78 ECO:
The programmable entry-level model for industrial use with 5.5" monochrome display.
High-speed cutter N 78 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow.
High-speed cutter N 78 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a panel and distortion correction and an extended range of options.
Configure the POLAR N 78 high-speed cutter with performance-enhancing options.
The 11th generation of POLAR high-speed cutters starts with the POLAR N 78 and is characterized in particular by the future-oriented platform for easy network integration and the proven technology with a new design.
The high-speed cutter N 78 is available in three equipment variants.
High-speed cutter N 78 ECO:
The programmable entry-level model for industrial use with 5.5" monochrome display.
High-speed cutter N 78 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow.
High-speed cutter N 78 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a panel and distortion correction and an extended range of options.
Configure the POLAR N 78 high-speed cutter with performance-enhancing options.
Product category: High-speed cutting machines
POLAR N 92
The all-rounder for half-size formats
POLAR N 92 high-speed cutters are used for cutting semi-finished and finished products made of paper, cardboard, paperboard, plastic films, etc. in the half-size range.
In the graphic industry, the high-speed cutter is also known as a guillotine cutter, paper cutter or simply as a cutting machine.
Even in the basic version, this model has extensive features that can increase production by up to 20%.
Formats up to a diagonal of 920 mm can be conveniently rotated in the cutter. For larger formats, the material to be cut can only be rotated on the front table.
High-speed cutter N 92 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic automatic programming for a largely automatic workflow.
High-speed cutter N 92 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, blank and distortion correction and an extended range of options.
POLAR N 92 high-speed cutters are used for cutting semi-finished and finished products made of paper, cardboard, paperboard, plastic films, etc. in the half-size range.
In the graphic industry, the high-speed cutter is also known as a guillotine cutter, paper cutter or simply as a cutting machine.
Even in the basic version, this model has extensive features that can increase production by up to 20%.
Formats up to a diagonal of 920 mm can be conveniently rotated in the cutter. For larger formats, the material to be cut can only be rotated on the front table.
High-speed cutter N 92 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic automatic programming for a largely automatic workflow.
High-speed cutter N 92 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, blank and distortion correction and an extended range of options.
Product category: High-speed cutting machines
POLAR N 115
Worldwide best-selling high-speed cutter with a cutting width of 115 cm
The high-speed cutter POLAR 115 with a cutting width of 115 cm is the worldwide best-selling high-speed cutter from POLAR and is mainly used in the print format class 70 x 100 cm
Formats up to a diagonal of 1,150 mm can be conveniently rotated in the high-speed cutter. For larger formats, the material to be cut can only be rotated on the front table.
High-speed cutter N 115 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 115 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 115 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
The high-speed cutter POLAR 115 with a cutting width of 115 cm is the worldwide best-selling high-speed cutter from POLAR and is mainly used in the print format class 70 x 100 cm
Formats up to a diagonal of 1,150 mm can be conveniently rotated in the high-speed cutter. For larger formats, the material to be cut can only be rotated on the front table.
High-speed cutter N 115 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 115 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 115 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
Product category: High-speed cutting machines
POLAR N 137
The basis for all highly automated PACE systems
The POLAR N 137 high-speed cutter is the first step into the large-format class for cutting, for example, printed products in III b format.
If a lowerable side stop (option) is available, formats with a diagonal of 1,370 mm can be turned on the rear table. For larger formats, the material to be cut is only rotated on the front table.
The high-speed cutter can be upgraded to a core component in a PACE system with gripper transport systems.
High-speed cutter N 137 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 137 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 137 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
The POLAR N 137 high-speed cutter is the first step into the large-format class for cutting, for example, printed products in III b format.
If a lowerable side stop (option) is available, formats with a diagonal of 1,370 mm can be turned on the rear table. For larger formats, the material to be cut is only rotated on the front table.
The high-speed cutter can be upgraded to a core component in a PACE system with gripper transport systems.
High-speed cutter N 137 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 137 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 137 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
Product category: High-speed cutting machines
POLAR N 155
The successful model in the 100 x 140 print format class
The POLAR N 155 high-speed cutter is mainly used in the 100 x 140 cm print format class. Formats up to a diagonal of 1,550 mm can be conveniently rotated in the high-speed cutter. For larger formats, the material to be cut must be rotated on the front table.
The high-speed cutter can be upgraded to a core component in a PACE system with gripper transport systems.
High-speed cutter N 155 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 155 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 155 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
The POLAR N 155 high-speed cutter is mainly used in the 100 x 140 cm print format class. Formats up to a diagonal of 1,550 mm can be conveniently rotated in the high-speed cutter. For larger formats, the material to be cut must be rotated on the front table.
The high-speed cutter can be upgraded to a core component in a PACE system with gripper transport systems.
High-speed cutter N 155 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 155 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and true image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 155 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
Product category: High-speed cutting machines
POLAR N 176
The largest model of the 11th machine generation
The POLAR N 176 high-speed cutter is the largest model in the POLAR cutter range and is mainly used in the 126 x 166 cm print format class. Formats up to a diagonal of 1,760 mm can be conveniently rotated in the high-speed cutter.
For larger formats, the material to be cut must be rotated on the front table. The high-speed cutter can be upgraded with gripper transport systems to become the core component in a PACE system.
High-speed cutter N 176 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 176 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and real image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 176 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
The POLAR N 176 high-speed cutter is the largest model in the POLAR cutter range and is mainly used in the 126 x 166 cm print format class. Formats up to a diagonal of 1,760 mm can be conveniently rotated in the high-speed cutter.
For larger formats, the material to be cut must be rotated on the front table. The high-speed cutter can be upgraded with gripper transport systems to become the core component in a PACE system.
High-speed cutter N 176 PLUS:
All-round model with 18.5" color display and touch-screen operation for all standard cutting jobs with graphic programming automation for a largely automatic workflow. Equipment examples: Graphic operator guidance in various language packages. Switchable measuring system, from metric to inch or Shaku, user interface individually configurable, OptiKnife knife change and much more.
High-speed cutter N 176 PRO HD:
The programmable top model with capacitive 21.5" touch-screen display and real image display for demanding cutting jobs, thanks to job-specific programmable parameters, a blank and distortion correction as well as an extended range of options.
The equipment variant N 176 AT HD is the most effective model of this high-speed cutter type due to the automatic waste removal during cutting.
Product category: Cutting machines and cutting systems
POLAR CuttingSystem 160
Cutting system to improve performance in half and medium format
Up to 65% more output compared to a high-speed cutter without peripherals.
In half-format, i.e. for cut material sizes up to a maximum of 53 x 74 cm, the POLAR CuttingSystem 160 offers performance-enhancing components for rationalizing the processes of loading, jogging, cutting and unloading. If an operator processes an average of 10 layers of material per hour on the Solo high-speed cutter, system components increase the output to up to 16 layers per hour while at the same time reducing the physical strain.
Cutting system to improve performance, ergonomics and quality
The workflow: The material to be cut is brought to an optimum working height by means of a loading lift, placed by the operator in the automatic jogger, jogged and then pushed onto the front table of the high-speed cutter. After cutting, the material is unloaded onto a pallet using an unloading lift - also at a working height that is easy on the back.
POLAR components are optionally available with performance-enhancing features: high-speed cutter with "PRO" equipment, RA jogger with air discharge roller and quantity determination by the counting scale component.
Up to 65% more output compared to a high-speed cutter without peripherals.
In half-format, i.e. for cut material sizes up to a maximum of 53 x 74 cm, the POLAR CuttingSystem 160 offers performance-enhancing components for rationalizing the processes of loading, jogging, cutting and unloading. If an operator processes an average of 10 layers of material per hour on the Solo high-speed cutter, system components increase the output to up to 16 layers per hour while at the same time reducing the physical strain.
Cutting system to improve performance, ergonomics and quality
The workflow: The material to be cut is brought to an optimum working height by means of a loading lift, placed by the operator in the automatic jogger, jogged and then pushed onto the front table of the high-speed cutter. After cutting, the material is unloaded onto a pallet using an unloading lift - also at a working height that is easy on the back.
POLAR components are optionally available with performance-enhancing features: high-speed cutter with "PRO" equipment, RA jogger with air discharge roller and quantity determination by the counting scale component.
Product category: High-speed cutting machines
POLAR N 78
The 11th generation of POLAR high-speed cutters begins with POLAR N 78. It is distinguished by its future-orientated platform for simple network integration and well-proven technology with a new design.
High-speed cutter N 78 ECO:
The programmable economy model for industrial use with 5.5'' monochrome display
High-speed cutter N 78 PLUS:
The allrounder with 18.5“ color display and touch-screen operation. Suitable for all standard cutting jobs. Featuring automatic graphic programming to ensure a highly-automated process.
High-speed cutter N 78 PRO HD:
The programmable high performance model with a capacitive 21.5'' Touch-Screen display and real image preview for highend applications thanks to job specific programmable parameter, label and distortion correction as well as an extended range of options.
Configure your POLAR N 78 high-speed cutter with performance-enhancing options tailored to your own requirements.
High-speed cutter N 78 ECO:
The programmable economy model for industrial use with 5.5'' monochrome display
High-speed cutter N 78 PLUS:
The allrounder with 18.5“ color display and touch-screen operation. Suitable for all standard cutting jobs. Featuring automatic graphic programming to ensure a highly-automated process.
High-speed cutter N 78 PRO HD:
The programmable high performance model with a capacitive 21.5'' Touch-Screen display and real image preview for highend applications thanks to job specific programmable parameter, label and distortion correction as well as an extended range of options.
Configure your POLAR N 78 high-speed cutter with performance-enhancing options tailored to your own requirements.
Product category: Jogging tables and automatic jogging machines
POLAR CuttingSystem 160
Up to 65 % more output adverse a high-speed cutter without peripheral equipment
For half-size products, such as sizes up to max. 53 x 74 cm, POLAR CuttingSystem 160 offers performance-enhancing components which streamline the loading, jogging, cutting and unloading processes. When the operator produces an average of 10 reams per hour on a stand-alone high-speed cutter, this output can be increased to up to 16 reams per hour when system components are used, while reducing at the same time the physical working load.
Cutting System for improving the output, ergonomics and quality
The workflow: A loading lift takes the material to be cut onto the optimal working height for the operator who puts it on the automatic jogger. After jogging is completed, he pushes the material onto the front table of the high-speed cutter. After cutting, the pallet is unloaded with the help of a lift which also ensures that the operator's back will be saved.
POLAR components are also available with optional performance-enhancing features: High-speed cutter with PRO equipment, automatic jogger RA with air-removing roller and determination of quantity by a counting scale.
For half-size products, such as sizes up to max. 53 x 74 cm, POLAR CuttingSystem 160 offers performance-enhancing components which streamline the loading, jogging, cutting and unloading processes. When the operator produces an average of 10 reams per hour on a stand-alone high-speed cutter, this output can be increased to up to 16 reams per hour when system components are used, while reducing at the same time the physical working load.
Cutting System for improving the output, ergonomics and quality
The workflow: A loading lift takes the material to be cut onto the optimal working height for the operator who puts it on the automatic jogger. After jogging is completed, he pushes the material onto the front table of the high-speed cutter. After cutting, the pallet is unloaded with the help of a lift which also ensures that the operator's back will be saved.
POLAR components are also available with optional performance-enhancing features: High-speed cutter with PRO equipment, automatic jogger RA with air-removing roller and determination of quantity by a counting scale.
Product category: Three-knife trimmers
POLAR BC 330
The sturdy and networkable 3-Side Trimmer POLAR BC 330 is the latest development for automatically cutting perfect-bound or saddle-stitched products (e.g. books). In contrast to three-knife trimmers, it only has one knife for cutting three sides.
Integration into the digital workflow
Variable size options from product to product
Cutting unit – easily accessible enabling a swift and simple knife change
Minimum maintenance required due to the use of innovative materials
A gripper puts the product into the correct cutting position. The cut is hydraulic, which enables the time the knife spends in the bottom dead center to be adapted to the material. The robust cutting unit guarantees a precise cut that is gentle on the material. The applied pressure can be infinitely adjusted to every material to be cut within a large adjustment range.
To increase performance, several products, stacked on top of each other, can be cut simultaneously.
The BC 330 is operated from an ergonomically positioned 18.5" touchscreen display.
Repeat cut sizes can be saved and adapted at any time.
In order to start the cutting program automatically, the machine can be equipped with a bar-code reader. This allows setup times to be reduced to almost zero.
Integration into the digital workflow
Variable size options from product to product
Cutting unit – easily accessible enabling a swift and simple knife change
Minimum maintenance required due to the use of innovative materials
A gripper puts the product into the correct cutting position. The cut is hydraulic, which enables the time the knife spends in the bottom dead center to be adapted to the material. The robust cutting unit guarantees a precise cut that is gentle on the material. The applied pressure can be infinitely adjusted to every material to be cut within a large adjustment range.
To increase performance, several products, stacked on top of each other, can be cut simultaneously.
The BC 330 is operated from an ergonomically positioned 18.5" touchscreen display.
Repeat cut sizes can be saved and adapted at any time.
In order to start the cutting program automatically, the machine can be equipped with a bar-code reader. This allows setup times to be reduced to almost zero.
Product category: Cutting machines and cutting systems
POLAR CuttingSystem 200
Cutting system to improve performance, ergonomics and quality
In the medium format, with cutting material sizes up to a maximum of 75 x 106 cm, the POLAR CuttingSystem 200 offers performance-enhancing components to streamline the processes of loading, jogging, cutting and unloading. If an operator processes an average of 10 layers of material per hour on the Solo high-speed cutter, system components increase the output to up to 20 layers per hour while reducing the physical strain.
The workflow: The material to be cut is brought to an optimum working height with a loading lift, placed in the jogger by the operator, jogged and then pushed onto the front table of the high-speed cutter. After cutting, the Transomat E automatically places the layers on the pallet, while cutting can continue at the same time. This reduces production costs by up to 70 percent, depending on the cutting program.
POLAR components are optionally available with performance-enhancing features: high-speed cutter as equipment model "PRO" or model "AT" with automatic cutting waste removal, stacking lifts with increased load capacity of 1200 kg, automatic jogger RA with air discharge roller and quantity determination by component counting scale.
In the medium format, with cutting material sizes up to a maximum of 75 x 106 cm, the POLAR CuttingSystem 200 offers performance-enhancing components to streamline the processes of loading, jogging, cutting and unloading. If an operator processes an average of 10 layers of material per hour on the Solo high-speed cutter, system components increase the output to up to 20 layers per hour while reducing the physical strain.
The workflow: The material to be cut is brought to an optimum working height with a loading lift, placed in the jogger by the operator, jogged and then pushed onto the front table of the high-speed cutter. After cutting, the Transomat E automatically places the layers on the pallet, while cutting can continue at the same time. This reduces production costs by up to 70 percent, depending on the cutting program.
POLAR components are optionally available with performance-enhancing features: high-speed cutter as equipment model "PRO" or model "AT" with automatic cutting waste removal, stacking lifts with increased load capacity of 1200 kg, automatic jogger RA with air discharge roller and quantity determination by component counting scale.
Product category: Cutting machines and cutting systems
POLAR CuttingSystem 200 PACE
Cutting system with highly automated processes in medium and large formats
In the medium format, with cutting material sizes up to 75 x 106 cm, the POLAR CuttingSystem 200 PACE automates the finishing processes. PACE stands for "POLAR Automation for Cutting Efficiency" and requires the use of rotary gripper systems for fully automated material movement.
In the POLAR CuttingSystem 200 PACE, gripper transport systems pick up the layers from automatic joggers, air board lifts, stacking racks or a Transomat B and transport them to the rear table.
POLAR "Autoturn" rotary grippers automate the turning of undivided cutting layers on the rear table of the high-speed cutter.
Cutting systems of the "PACE" performance class increase the efficiency of POLAR CuttingSystems by up to 100 percent compared to a conventional CuttingSystem 200.
The workflow: The material to be cut is brought to an optimum working height with a loading lift, placed in the jogger by the operator, jogged and then transported to the rear table of the high-speed cutter by the Autotrans gripper system. Material movements on the rear table are automated by the Autoturn rotary gripper. After cutting, the Transomat E automatically places the layers on the pallet while the cutting process continues.
POLAR components are optionally available with performance-enhancing features: Exact quantity determination by component counting scale.
In the medium format, with cutting material sizes up to 75 x 106 cm, the POLAR CuttingSystem 200 PACE automates the finishing processes. PACE stands for "POLAR Automation for Cutting Efficiency" and requires the use of rotary gripper systems for fully automated material movement.
In the POLAR CuttingSystem 200 PACE, gripper transport systems pick up the layers from automatic joggers, air board lifts, stacking racks or a Transomat B and transport them to the rear table.
POLAR "Autoturn" rotary grippers automate the turning of undivided cutting layers on the rear table of the high-speed cutter.
Cutting systems of the "PACE" performance class increase the efficiency of POLAR CuttingSystems by up to 100 percent compared to a conventional CuttingSystem 200.
The workflow: The material to be cut is brought to an optimum working height with a loading lift, placed in the jogger by the operator, jogged and then transported to the rear table of the high-speed cutter by the Autotrans gripper system. Material movements on the rear table are automated by the Autoturn rotary gripper. After cutting, the Transomat E automatically places the layers on the pallet while the cutting process continues.
POLAR components are optionally available with performance-enhancing features: Exact quantity determination by component counting scale.
Product category: Cutting machines and cutting systems
POLAR CuttingSystem 120
Efficient cutting system for precise work without jogging process
Precise cutting results do not necessarily require jogging with exact edges: Unprinted materials with separating and all-round trim or even suitably suitable printed products can manage without a jogging process.
For paper sizes up to 53 x 74 cm (half-size), POLAR CuttingSystems 120 have been offering performance-enhancing components for cutting operations for over 55 years: If an operator processes an average of 10 layers of cutting material per hour on the Solo high-speed cutter, system components increase the performance to 120 percent while at the same time reducing the physical strain.
The workflow: The material to be cut is brought to an optimum working height with a loading lift and pushed onto the front table of the high-speed cutter by the operator. After cutting, the material is unloaded onto a pallet using an unloading lift - also at a working height that is easy on the back.
POLAR components are optionally available with performance-enhancing features: high-speed cutters with "PRO" equipment or LW stacking lifts with stacking device for edge-precise, manual stacking after cutting.
Precise cutting results do not necessarily require jogging with exact edges: Unprinted materials with separating and all-round trim or even suitably suitable printed products can manage without a jogging process.
For paper sizes up to 53 x 74 cm (half-size), POLAR CuttingSystems 120 have been offering performance-enhancing components for cutting operations for over 55 years: If an operator processes an average of 10 layers of cutting material per hour on the Solo high-speed cutter, system components increase the performance to 120 percent while at the same time reducing the physical strain.
The workflow: The material to be cut is brought to an optimum working height with a loading lift and pushed onto the front table of the high-speed cutter by the operator. After cutting, the material is unloaded onto a pallet using an unloading lift - also at a working height that is easy on the back.
POLAR components are optionally available with performance-enhancing features: high-speed cutters with "PRO" equipment or LW stacking lifts with stacking device for edge-precise, manual stacking after cutting.
Product category: Cutting machines and cutting systems
POLAR CuttingSystem 300
Efficient cutting system with semi-automated components in medium format
Unprinted or prepared materials do not require a jogging process.
The POLAR CuttingSystems 300 already operate semi-automatically in the medium format range (paper sizes up to 75 x 106 cm) when it comes to automatic loading and unloading of a high-speed cutter. The result is an increase in performance of up to 100 percent and significantly improved ergonomics.
The workflow: The material to be cut is automatically pulled by the Transomat TR 1 BL from the pile onto the Transomat pallet and from the pusher on to the high-speed cutter front table. After cutting, the Transomat E automatically places the finished layers on the pallet.
POLAR components with performance-enhancing features are available as an option: With the loading Transomat TR 3 BL, the high-speed cutter is loaded onto the rear table without crossing. This means that while the cutter is being unloaded, the new cutting layer can already be transported onto the rear table.
The POLAR "PRO" high-speed cutter model further optimizes the overall performance of the systems.
Unprinted or prepared materials do not require a jogging process.
The POLAR CuttingSystems 300 already operate semi-automatically in the medium format range (paper sizes up to 75 x 106 cm) when it comes to automatic loading and unloading of a high-speed cutter. The result is an increase in performance of up to 100 percent and significantly improved ergonomics.
The workflow: The material to be cut is automatically pulled by the Transomat TR 1 BL from the pile onto the Transomat pallet and from the pusher on to the high-speed cutter front table. After cutting, the Transomat E automatically places the finished layers on the pallet.
POLAR components with performance-enhancing features are available as an option: With the loading Transomat TR 3 BL, the high-speed cutter is loaded onto the rear table without crossing. This means that while the cutter is being unloaded, the new cutting layer can already be transported onto the rear table.
The POLAR "PRO" high-speed cutter model further optimizes the overall performance of the systems.
Product category: Cutting machines and cutting systems
POLAR CuttingSystem 300 PACE
Efficient cutting system with highly automated processes in medium and large formats
The POLAR CuttingSystem PACE 300 automates the processes of finishing unprinted or prepared materials.
PACE stands for "POLAR Automation for Cutting Efficiency" and comprises the following automation components:
The material to be cut is automatically loaded from the stack onto the Transomat pallet by the Transomat TR 3 BL and pulled onto the rear table of the high-speed cutter by the "Autotrans" gripper transport system.
The Autoturn rotary gripper with automatic feeder is the core element of the PACE cutting system. By means of the gripper system, the cutting layer is rotated on the rear table either to the right or to the left by 90 or 180 degrees and positioned with an automatic feeder. The cut is also triggered automatically. Unseparated cutting layers can thus be cut unmanned. If more cuts are required, the operator must manually rotate the individual panels during further processing of the cutting job.
The prerequisite for this highly automated cutting system PACE is a POLAR high-speed cutter Autotrim for automatic removal of the cutting waste.
The unloading Transomat facilitates the unloading of the high-speed cutter and optimizes the entire work flow. The intermediate or end products are manually pushed onto the transport pallet of the Transomat and then automatically and precisely deposited on a pallet.
The POLAR CuttingSystem PACE 300 automates the processes of finishing unprinted or prepared materials.
PACE stands for "POLAR Automation for Cutting Efficiency" and comprises the following automation components:
- Gripper transport system POLAR Autotrans for loading the high-speed cutter via the rear table
- POLAR Autoturn rotary gripper automates the turning of undivided cutting layers in the high-speed cutter
- Autotrim for automatic waste disposal
The material to be cut is automatically loaded from the stack onto the Transomat pallet by the Transomat TR 3 BL and pulled onto the rear table of the high-speed cutter by the "Autotrans" gripper transport system.
The Autoturn rotary gripper with automatic feeder is the core element of the PACE cutting system. By means of the gripper system, the cutting layer is rotated on the rear table either to the right or to the left by 90 or 180 degrees and positioned with an automatic feeder. The cut is also triggered automatically. Unseparated cutting layers can thus be cut unmanned. If more cuts are required, the operator must manually rotate the individual panels during further processing of the cutting job.
The prerequisite for this highly automated cutting system PACE is a POLAR high-speed cutter Autotrim for automatic removal of the cutting waste.
The unloading Transomat facilitates the unloading of the high-speed cutter and optimizes the entire work flow. The intermediate or end products are manually pushed onto the transport pallet of the Transomat and then automatically and precisely deposited on a pallet.
Product category: Label cutting machines
POLAR LabelSystem SC-20
Ideal for the entry into industrial cutting label production
In the LabelSystem SC-20, the POLAR 137 Autotrim M automatic cutter is the core component for the economical production of cut labels. Since both strips and panels are cut in the POLAR 137 Autotrim M automatic cutter, neither a precutting machine nor a feed table is necessary. The label material must be available as a jogged layer.
Workflow:
The material is fed either manually via the front table or automatically via the rear table. First the material is cut into strips by the operator. These are then positioned in the automatic cutter and laterally aligned on the rear table before cutting. The individual panels are then cut automatically.
After cutting, the blanks are aligned on the front table and transported into the BM-105 multi-pocket bundler by means of an ejector. The bundle pusher then pushes the complete row of blanks into the banding device. The finished bundles are pushed further onto the delivery table and can be removed manually for packing.
In the LabelSystem SC-20, the POLAR 137 Autotrim M automatic cutter is the core component for the economical production of cut labels. Since both strips and panels are cut in the POLAR 137 Autotrim M automatic cutter, neither a precutting machine nor a feed table is necessary. The label material must be available as a jogged layer.
Workflow:
The material is fed either manually via the front table or automatically via the rear table. First the material is cut into strips by the operator. These are then positioned in the automatic cutter and laterally aligned on the rear table before cutting. The individual panels are then cut automatically.
After cutting, the blanks are aligned on the front table and transported into the BM-105 multi-pocket bundler by means of an ejector. The bundle pusher then pushes the complete row of blanks into the banding device. The finished bundles are pushed further onto the delivery table and can be removed manually for packing.
Product category: Label cutting machines
POLAR LabelSystem SC-21
Efficient for the industrial production of cut labels
The POLAR LabelSystem SC-21 has the highest productivity in the production of cut labels due to its parallel production steps. First, the label material is cut into strips inline or offline in a POLAR high-speed cutter. Further processing is carried out on the automatic cutter POLAR Autocut 115, the core component in the LabelSystem SC-21.
Workflow:
The pre-cut strips are manually positioned on the POLAR LT-S loading table and then pushed onto the Autocut rear table. In the Autocut 115, the strips are aligned laterally and from the front before being cut on the rear table.
After cutting, the blanks are automatically aligned on the front table and transported into the BM-105 multi-pocket bundler by an ejector. The bundle pusher then pushes the complete row of blanks into the banding device. The finished bundles are pushed further onto the delivery table and can be removed manually for packing.
The POLAR LabelSystem SC-21 has the highest productivity in the production of cut labels due to its parallel production steps. First, the label material is cut into strips inline or offline in a POLAR high-speed cutter. Further processing is carried out on the automatic cutter POLAR Autocut 115, the core component in the LabelSystem SC-21.
Workflow:
The pre-cut strips are manually positioned on the POLAR LT-S loading table and then pushed onto the Autocut rear table. In the Autocut 115, the strips are aligned laterally and from the front before being cut on the rear table.
After cutting, the blanks are automatically aligned on the front table and transported into the BM-105 multi-pocket bundler by an ejector. The bundle pusher then pushes the complete row of blanks into the banding device. The finished bundles are pushed further onto the delivery table and can be removed manually for packing.
Product category: Label cutting machines
POLAR LabelSystem SC-25
Trendsetter in the industrial production of cut labels
The POLAR LabelSystem SC-25 features the highest productivity and cutting accuracy. By processing two strips simultaneously, new performance dimensions of up to 1,560 bundled packages in 60 minutes are achieved. It is specially designed for the industrial production of very small labels and has a modular structure. First, the label material is cut into strips inline or offline in a POLAR high-speed cutter. Further processing takes place in the POLAR Autocut 25 automatic cutter, the core component in the LabelSystem SC-25.
Workflow:
The pre-cut strips are positioned manually on the LT-S and then pushed onto the Autocut rear table. In the Autocut, the strips are aligned laterally and from the front before being cut on the rear table. Two strips are cut at a time.
After cutting, the two labels are transported via a rocker into the BSduo bundler. First, the two labels are separated, then pushed through the banding material by the inserter and finally welded together in a stable manner. The banded blanks reach the material delivery via special guides, which guarantee a gentle material transport, and can be removed there for packaging.
The POLAR LabelSystem SC-25 features the highest productivity and cutting accuracy. By processing two strips simultaneously, new performance dimensions of up to 1,560 bundled packages in 60 minutes are achieved. It is specially designed for the industrial production of very small labels and has a modular structure. First, the label material is cut into strips inline or offline in a POLAR high-speed cutter. Further processing takes place in the POLAR Autocut 25 automatic cutter, the core component in the LabelSystem SC-25.
Workflow:
The pre-cut strips are positioned manually on the LT-S and then pushed onto the Autocut rear table. In the Autocut, the strips are aligned laterally and from the front before being cut on the rear table. Two strips are cut at a time.
After cutting, the two labels are transported via a rocker into the BSduo bundler. First, the two labels are separated, then pushed through the banding material by the inserter and finally welded together in a stable manner. The banded blanks reach the material delivery via special guides, which guarantee a gentle material transport, and can be removed there for packaging.
Product category: Label die-cutting machines
POLAR Die-Cutter DC-M
Solo die cutter for small to medium runs in highest quality with manual loading
The POLAR DC-M solo die-cutter is characterized by maximum flexibility, simple operation, maximum die-cutting accuracy and wide format variability.
Workflow: First, the material to be die cut is pre-cut into stacks of labels in a high-speed cutter.The pre-cut stack of labels is then manually placed in the insertion shaft, automatically guided in front of the punch and pressed through the die by the punch (piercing principle). This gives the label its predefined shape. The die-cut end products are accurately positioned on the packaging table via an output chute.
Customer benefits
The POLAR DC-M solo die-cutter is characterized by maximum flexibility, simple operation, maximum die-cutting accuracy and wide format variability.
Workflow: First, the material to be die cut is pre-cut into stacks of labels in a high-speed cutter.The pre-cut stack of labels is then manually placed in the insertion shaft, automatically guided in front of the punch and pressed through the die by the punch (piercing principle). This gives the label its predefined shape. The die-cut end products are accurately positioned on the packaging table via an output chute.
Customer benefits
- Easy set-up of the cutting die with change frame system outside the machine
- OnePunchRegister enables positioning of the cutting die to the print image with just one package
- Motorized fine adjustment of the cutting die for tool-free operation on the machine
- Alignment of the die-cutting material on all four sides guarantees maximum die-cutting accuracy and enables greater insertion heights
- Large format range
Product category: Label die-cutting machines
POLAR LabelSystem DCC-M
Solo die cutter using the counterpressure principle for compressible materials in short to medium runs
In addition to its high flexibility, simple operation and punching accuracy, the POLAR LabelSystem DCC-M is particularly suitable for processing compressible plastic materials such as OPP films for in-mould.
Workflow:
First, the material to be punched is pre-cut to a stack of blanks in a high-speed cutter. Then the pre-cut blank stack is manually placed in the insertion chute.
As soon as the light grid of the delivery chute is free, the inserted blank is automatically transported into the punching area by two gripper fingers. An integrated device lifts the pile to prevent the bottom sheet from getting stuck. The counter-pressure punch, the exact counterpart to the die-cutter, moves through the die-cutter and presses the stack of blanks. The stack is fixed on all four sides.
Subsequently, the pressed stack is pushed through the punch by the punching punch and receives its predetermined shape. The stack is pressed out of the die cutter again by the counter-pressure punch and transported to the delivery via a shuttle.
Customer benefit
In addition to its high flexibility, simple operation and punching accuracy, the POLAR LabelSystem DCC-M is particularly suitable for processing compressible plastic materials such as OPP films for in-mould.
Workflow:
First, the material to be punched is pre-cut to a stack of blanks in a high-speed cutter. Then the pre-cut blank stack is manually placed in the insertion chute.
As soon as the light grid of the delivery chute is free, the inserted blank is automatically transported into the punching area by two gripper fingers. An integrated device lifts the pile to prevent the bottom sheet from getting stuck. The counter-pressure punch, the exact counterpart to the die-cutter, moves through the die-cutter and presses the stack of blanks. The stack is fixed on all four sides.
Subsequently, the pressed stack is pushed through the punch by the punching punch and receives its predetermined shape. The stack is pressed out of the die cutter again by the counter-pressure punch and transported to the delivery via a shuttle.
Customer benefit
- Job changeover in only 10-15 minutes thanks to OptiChange
- Motorized fine adjustment of the die-cutting tool for tool-free operation on the machine
- Highest die-cutting accuracy by aligning the stack on all four sides and pressing the stack prior to the actual die-cutting process
- Minimal material loss, as the stack is fixed between the punching and counter-pressure punches until it is unloaded
Product category: Label die-cutting machines
POLAR LabelSystem DC-11
System for highly automated inline production of die-cut labels
POLAR LabelSystem DC-11 is designed for highly automated inline production of bundled die-cut labels. The menu-guided setup of the system facilitates operation and reduces setup times.
Workflow:
First, the label material is pre-cut inline or offline as strips with a POLAR high-speed cutter. The POLAR Autocut 25 automatic cutter then takes over the strips and cuts them into label packs. An ejector on the front table of the Autocut 25 transports the pack of panels to the DC system die cutter.
After punching, the bundles of panels are automatically pushed to the BD single panel bundler and bundled. The ultrasonic welding unit in the BD requires no preheating, is always ready for use, is gentle on the material and causes no odour nuisance.
Highlights of the components
POLAR LabelSystem DC-11 is designed for highly automated inline production of bundled die-cut labels. The menu-guided setup of the system facilitates operation and reduces setup times.
Workflow:
First, the label material is pre-cut inline or offline as strips with a POLAR high-speed cutter. The POLAR Autocut 25 automatic cutter then takes over the strips and cuts them into label packs. An ejector on the front table of the Autocut 25 transports the pack of panels to the DC system die cutter.
After punching, the bundles of panels are automatically pushed to the BD single panel bundler and bundled. The ultrasonic welding unit in the BD requires no preheating, is always ready for use, is gentle on the material and causes no odour nuisance.
Highlights of the components
- Autocut 25 automatic cutter with knife changing frame for preparation outside the machine
- Systemstanze DC also has a change frame system with a patented positioning aid for preparation outside the machine. The centered change frame allows the easiest alignment to the right and to the left (patented). The format adjustment of the fence and pusher is patented tool-free and synchronous via handwheel. The punch can be extended continuously millimetre by millimetre when adjusting the register.
- Format adjustments in the POLAR BD single-pocket bundler are motorized and are made via a central operating display. This also enables fine adjustment in automatic mode.
Product category: Label die-cutting machines
POLAR LabelSystem DC-11 PLUS
Most productive system for industrial inline production of die-cut labels
POLAR LabelSystem DC-11 PLUS is designed for highly automated inline production of bundled die-cut labels. The menu-guided setup of the system facilitates operation and shortens setup times.
Workflow:
First, the label material is pre-cut inline or offline as strips with a POLAR high-speed cutter. The POLAR Autocut 25 PLUS automatic cutter takes over the strips and cuts two strips at a time into individual label packs. The two panels are separated by the automatic panel feeder and fed individually in front of the punch. The stack is then pressed through the cutting die by the punch (piercing principle) and is given its predetermined shape.
After die-cutting, the bundles of panels are automatically pushed into the BDplus single-panel bundler and bundled. The ultrasonic welding unit in the BD requires no preheating, is always ready for use, is gentle on the material and causes no odour nuisance.
Highlights of the LabelSystem DC-11 PLUS:
POLAR LabelSystem DC-11 PLUS is designed for highly automated inline production of bundled die-cut labels. The menu-guided setup of the system facilitates operation and shortens setup times.
Workflow:
First, the label material is pre-cut inline or offline as strips with a POLAR high-speed cutter. The POLAR Autocut 25 PLUS automatic cutter takes over the strips and cuts two strips at a time into individual label packs. The two panels are separated by the automatic panel feeder and fed individually in front of the punch. The stack is then pressed through the cutting die by the punch (piercing principle) and is given its predetermined shape.
After die-cutting, the bundles of panels are automatically pushed into the BDplus single-panel bundler and bundled. The ultrasonic welding unit in the BD requires no preheating, is always ready for use, is gentle on the material and causes no odour nuisance.
Highlights of the LabelSystem DC-11 PLUS:
- High output with up to 1,440 packages in 60 minutes with minimum manpower requirements
- OptiChange enables job changes in just 15 minutes
- OnePunchRegister enables positioning of the cutting die to the print image with just one package
- Highest cutting and punching accuracy by fixing the material in place
- Autocut 25 PLUS automatic cutter with knife changing frame for off-machine preparation
- System Punch DC PLUS also has a change frame system with a patented positioning aid for preparation outside the machine. The centered change frame allows the easiest alignment to the right and left (patented). The format adjustment of the fence and pusher is patented tool-free and synchronous via handwheel. The punch can be extended continuously millimetre by millimetre when adjusting the register.
- Format settings in the POLAR BDplus single-pocket bundler are made by motor via a central operating display. This also allows fine adjustment in automatic mode.
Product category: Label die-cutting machines
POLAR LabelSystem DCC-11
System based on the counterpressure principle for compressible materials for highly automated inline production
POLAR LabelSystem DCC-11 is designed for highly automated inline production of bundled die-cut labels made of compressible plastic materials such as OPP films for in-mould.
OptiChange simplifies operation and shortens set-up times. A job change is done in 15 minutes. Aligning the stack on all four sides and pressing the stack before the actual die-cutting process ensures maximum die-cutting accuracy.
Workflow:
First, the label material is precut as strips inline or offline with a POLAR high-speed cutter. The final cutting of the strips into label packs takes place on the POLAR Autocut 25 automatic cutter. The ejector on the front table of the Autocut 25 transports the label pack to the DCC system die cutter. After die-cutting, the panel packs are automatically pushed into the banding unit and bundled individually (optionally as a bar).
Highlights of the components
POLAR LabelSystem DCC-11 is designed for highly automated inline production of bundled die-cut labels made of compressible plastic materials such as OPP films for in-mould.
OptiChange simplifies operation and shortens set-up times. A job change is done in 15 minutes. Aligning the stack on all four sides and pressing the stack before the actual die-cutting process ensures maximum die-cutting accuracy.
Workflow:
First, the label material is precut as strips inline or offline with a POLAR high-speed cutter. The final cutting of the strips into label packs takes place on the POLAR Autocut 25 automatic cutter. The ejector on the front table of the Autocut 25 transports the label pack to the DCC system die cutter. After die-cutting, the panel packs are automatically pushed into the banding unit and bundled individually (optionally as a bar).
Highlights of the components
- Autocut 25 automatic cutter with knife changing frame for off-machine preparation
- Systemstanze DCC also has a change frame system with a patented positioning aid for preparation outside the machine. The centered change frame allows the easiest alignment to the right and left (patented). The punch has an interchangeable punching plate without notches, which allows punching without a base. As the punching plate has no holding ridge on the inside, welding of the material is prevented.
- The banding unit can be adjusted during automatic operation. The ultra-welding unit requires no preheating, is always ready for use, causes no odour nuisance and is gentle on the material.
Product category: Pile turners
POLAR Pile turner PW-1
Automatic and fast turning in half format
The POLAR Pile Turner PW-1 is mainly used in the half-size range. It works fast, saves costs and energy.
The POLAR Pile Turner PW-1 picks up the pile between trays on one side of the device, rotates it around a horizontal axis and sets it down upside down on the other side of the device.
Customer benefits:
The POLAR Pile Turner PW-1 is mainly used in the half-size range. It works fast, saves costs and energy.
The POLAR Pile Turner PW-1 picks up the pile between trays on one side of the device, rotates it around a horizontal axis and sets it down upside down on the other side of the device.
Customer benefits:
- Long waiting times due to manual turning are eliminated
- Gentle handling of the material to exclude damage
- Improved ergonomics, as lifting of heavy loads is avoided
Product category: Pile turners
POLAR Pile turner PW-4
Automatic and easy turning in medium format
The POLAR pile turner PW-4 is mainly used in the medium format sector. High performance in a small space and a short turning time characterize this pile turner type.
The POLAR PW-4 pile turner requires less space as it places the turned pallet back where it was picked up. The turning movement during the turning process is done manually. The PW-4 has an extremely low turning point, is easy to operate and has a short turning time of approx. 35 seconds.
Customer benefits:
The POLAR pile turner PW-4 is mainly used in the medium format sector. High performance in a small space and a short turning time characterize this pile turner type.
The POLAR PW-4 pile turner requires less space as it places the turned pallet back where it was picked up. The turning movement during the turning process is done manually. The PW-4 has an extremely low turning point, is easy to operate and has a short turning time of approx. 35 seconds.
Customer benefits:
- Long waiting times due to manual repositioning are eliminated
- Gentle handling of the material to avoid damage
- Improved ergonomics, as lifting of heavy loads is avoided
Product category: Pile turners
POLAR Pile turner PW-4 ABV
Automatic turning with aeration and alignment function in medium format
The POLAR PW-4 ABV pile turner is mainly used in the medium format sector. High performance in a small space and a short turning time characterize this pile turner type.
In addition to the turning function, the PW-4 ABV pile turner also offers an aeration and alignment function. This increases the stacking quality and has a decisive influence on the subsequent production processes.
Furthermore, the model version ABV still offers the function vibrating. In tilting position and in combination with air, this optimizes the pile conditions even more effectively.
Customer benefits:
The POLAR PW-4 ABV pile turner is mainly used in the medium format sector. High performance in a small space and a short turning time characterize this pile turner type.
In addition to the turning function, the PW-4 ABV pile turner also offers an aeration and alignment function. This increases the stacking quality and has a decisive influence on the subsequent production processes.
Furthermore, the model version ABV still offers the function vibrating. In tilting position and in combination with air, this optimizes the pile conditions even more effectively.
Customer benefits:
- Long waiting times due to manual repositioning are eliminated
- Gentle handling of the material to exclude damage
- Reduction of risks in the further production process by aligning the pile and blowing out printing powder
- Minimization of drying time after printing
Product category: Pile turners
POLAR Pile turner PW-6 ABV
Automatic turning with ventilation and alignment function in 6-format
The POLAR PW-6 ABV pile turner is mainly used in the large-format sector. High performance in a small space and a short turning time characterize this pile turner type.
In addition to the turning function, the POLAR PW-6 ABV pile turner also offers an aeration and alignment function. This increases the stacking quality and has a decisive influence on the subsequent production processes.
The ABV model also offers the vibration function. In the tilting position and in combination with air, this optimizes the stacking conditions even more effectively.
Customer benefits:
The POLAR PW-6 ABV pile turner is mainly used in the large-format sector. High performance in a small space and a short turning time characterize this pile turner type.
In addition to the turning function, the POLAR PW-6 ABV pile turner also offers an aeration and alignment function. This increases the stacking quality and has a decisive influence on the subsequent production processes.
The ABV model also offers the vibration function. In the tilting position and in combination with air, this optimizes the stacking conditions even more effectively.
Customer benefits:
- Long waiting times due to manual repositioning are eliminated
- Gentle handling of the material to exclude damages
- Reduction of risks in the further production process by aligning the pile and blowing out pressure powder
- Minimization of drying time after printing
Product category: CIP4 applications, JDF applications
Compucut
Intelligent data exchange between prepress and postpress
For more than 30 years, Compucut® has allowed cutting programs to be created outside the high-speed cutter. This completely eliminates programming times at the machine.
The POLAR software Compucut® is available in three versions:
Compucut® GO is a simple automation solution to fully automatically create cutting programs from CIP files according to a fixed cutting sequence and transfer them to a cutting machine. Go runs directly on a USB stick and is not installed on the PC. It is possible to process homogeneous shapes as well as collective shapes.
Compucut® CONTROL, on the other hand, offers the full range of software functions with real image display and the option of modifying the sheets manually. For example, the data can still be adapted to the intended processing (folding, perfect binding or saddle stitching). Cuts can be integrated or eliminated. The cutting programs are created outside the high-speed cutter on the PC and then sent either to the machine or to the External Cutting Program Management (ESPV), which can be accessed by any cutting machine integrated in the network.
Compucut® AUTO-CONTROL offers the same scope as CONTROL. In addition, it can create cutting programs completely automatically, i.e. without any manual intervention. The optimal cutting sequence with the fewest turns and cuts is automatically created by the software. Operating errors are thus completely eliminated. As with CONTROL, the finished cutting programs are sent either directly to the machine or to the ESPV.
Implemented prepress connections:
For more than 30 years, Compucut® has allowed cutting programs to be created outside the high-speed cutter. This completely eliminates programming times at the machine.
The POLAR software Compucut® is available in three versions:
Compucut® GO is a simple automation solution to fully automatically create cutting programs from CIP files according to a fixed cutting sequence and transfer them to a cutting machine. Go runs directly on a USB stick and is not installed on the PC. It is possible to process homogeneous shapes as well as collective shapes.
Compucut® CONTROL, on the other hand, offers the full range of software functions with real image display and the option of modifying the sheets manually. For example, the data can still be adapted to the intended processing (folding, perfect binding or saddle stitching). Cuts can be integrated or eliminated. The cutting programs are created outside the high-speed cutter on the PC and then sent either to the machine or to the External Cutting Program Management (ESPV), which can be accessed by any cutting machine integrated in the network.
Compucut® AUTO-CONTROL offers the same scope as CONTROL. In addition, it can create cutting programs completely automatically, i.e. without any manual intervention. The optimal cutting sequence with the fewest turns and cuts is automatically created by the software. Operating errors are thus completely eliminated. As with CONTROL, the finished cutting programs are sent either directly to the machine or to the ESPV.
Implemented prepress connections:
- Agfa - Apogee
- Creo/Kodak - Pandora 2.0 Pro and Preps 4.2 Pro and higher
- EskoArtwork - ArtPro
- Efi - Matrix
- Heidelberg - Prinect Signa Station, version 6.1 and higher
- Hewlett Packard - Direct2Finish Workflow (HP Smart Stream Production Pro Print Server)
- Krause - Krause Imposition Manager
- One Vision - Speedflow Impose, Version 4.0
- Screen - Flatworker
About us
Company portrait
The POLAR Group is an independent, family-run company with headquarters in Hofheim in the German state of Hesse and specializes in the design of innovative and future-oriented solutions in the post-press and packaging technology sectors.
The POLAR Group employs around 500 people worldwide at sites in Hofheim, Hochheim and Shanghai, and offers its employees diverse roles and good career development opportunities in administration and production.
POLAR was founded in 1906 as "Adolf Mohr, Maschinenfabrik". Since then, the company has undergone a transformation, not only in terms of the products it focuses on. It has grown from a regional provider to the world’s number one for high-speed cutters and associated peripheral equipment for the graphics industry.
POLAR develops efficient solutions for the post-print sector and is a future-oriented technology company with a global presence. The product range includes components and systems that link up and automate all processes, from loading, jogging, cutting and die-cutting through to unloading and banding.
The POLAR Group employs around 500 people worldwide at sites in Hofheim, Hochheim and Shanghai, and offers its employees diverse roles and good career development opportunities in administration and production.
POLAR was founded in 1906 as "Adolf Mohr, Maschinenfabrik". Since then, the company has undergone a transformation, not only in terms of the products it focuses on. It has grown from a regional provider to the world’s number one for high-speed cutters and associated peripheral equipment for the graphics industry.
POLAR develops efficient solutions for the post-print sector and is a future-oriented technology company with a global presence. The product range includes components and systems that link up and automate all processes, from loading, jogging, cutting and die-cutting through to unloading and banding.
Company data
Export content
> 75%
Number of employees
100-499
Foundation
1906
