Lamina System AB of Boras at virtual.drupa in Düsseldorf -- drupa - April 20 to 23, 2021 - Messe Düsseldorf
Manage stand orders
Select Option

Lamina System AB

Vevgatan 21, 50464 Boras
Sweden
Telephone +46 33 2334-00
Fax +46 33 2334-10
sales.dept@laminasystem.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Media files

Imagefilm Lamina - Popupline ENG

Contact

Oliver Hernaez

Area Sales Manager

Phone
+46707 233460

Email
Oliver.hernaez@laminasystem.com

Martin Taylor

Area Sales Manager

Phone
+46703 233440

Email
m.taylor@laminasystem.com

Tommi Leppänen

Area Sales Manager

Phone
+46706 233410

Email
t.leppanen@laminasystem.com

Per Fransson

Sales Manager

Phone
+46708 233412

Email
per.fransson@laminasystem.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Online events

There are currently no events available.
22
Apr
14:00 ‐ 14:30
Video conference

Live Demo - Lamina machines

Go to the online event
We will live showcase our machines and after this meeting it is possible to book personal machine shows. Please contact any of our sales person.
More Less
21
Apr
14:00 ‐ 14:30
Video conference

Live Demo - Lamina machines

Go to the online event
We will live showcase our machines and after this meeting it is possible to book personal machine shows. Please contact any of our sales person.
More Less

Visit us

20 Apr 2021

Topic

all-day

Book you personal meeting today!

You can book a personal video meeting with our sales team, we can also showcase our mahines just for you. Please contact any of our sales person.

More Less

21 Apr 2021

Topic

all-day

Book you personal meeting today!

You can book a personal video meeting with our sales team, we can also showcase our mahines just for you. Please contact any of our sales person.

More Less

22 Apr 2021

Topic

all-day

Book you personal meeting today!

You can book a personal video meeting with our sales team, we can also showcase our mahines just for you. Please contact any of our sales person.

More Less

23 Apr 2021

Topic

all-day

Book you personal meeting today!

You can book a personal video meeting with our sales team, we can also showcase our mahines just for you. Please contact any of our sales person.

More Less

Our range of products

Product categories

  • 03  post press / converting / packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.420  Laminating machines
  • 03  post press / converting / packaging
  • 03.02  converting
  • 03.02.130  Fold gluing machines
  • 03  post press / converting / packaging
  • 03.02  converting
  • 03.02.225  Corrugated board converting machines

Our products

Product category: Laminating machines

FASLINE EDGE

The Lamina FASLINE EDGE is a fully automatic high speed sheet-to-sheet laminating/mounting machine. The machine is equipped with both the Lamina Edge-to-Edge register for high precision registration and the all-new Lamina on-the- y register for continuous, non-stop registration with adjustable overlap by the press of a button. The machine has a high capacity rear edge top feeder that allows for loading pallets directly in to the unit for short stops due reloading. Bottom sheets are fed in to the machine by using a servo controlled non-stop belt feeder. The feeder is equipped with a heavy duty vacuum system to assure for reliable feeding of a various of materials.
 
Lamina fully automatic laminating machine type FASLINE
A LAMINA Model 1116 FL E FULL SHEET LAMINATOR - For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated.
 
The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy of less than ± 0,2 mm when proper materials and conditions exist.
 
Lamina's laminating machine type FASLINE EDGE is equipped with:
- Automatic non-stop substrate sheet feeder
- Automatic stream feeder for top sheet
- Precision gluing unit with automatic glue application
- Laminating station with On-the-fly or Edge-to-Edge registration system
- Pressure station
- Stacking table
- PLC control system
 
Automatic substrate sheet feeder
For automatic feeding of the bottom sheet. The sheets are fed by continuous running belts. The stack is filled from the top. The feeder is designed to handle materials with a thickness from 0,6 mm up to 10 mm.

Automatic top sheet feeder
For automatic feeding of top sheets. Suction cups pick up the top sheet from the stack and transport it to the top sheet conveyor. The feeder is designed to handle materials 150-450 gm/m2.
 
Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispenser directly connected to the glue container. The glue is automatically kept under control by a sensor. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.
 
Laminating station
Here the operator can choose Edge-to-Edge register or On-the-fly.
 
Lamina on-the-fly register for continuous, non-stop registration with adjustable overlap by the press of a button.
 
In the Edge-to Edge station, the top and bottom sheets are automatically controlled by the registration system.
 
The sheets are registered automatically at the lead edge as well as at the operator side, resulting in accuracy levels less than ± 0,2 mm. Photocells prevent the lamination process unless both sheets are properly positioned.
 
Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.
 
Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.
 
PLC control system
The Lamina PLC control system includes: Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

Popupline

Popupline is an innovative and unique one-phase/one-pass fully automated production line, high speed & high capacity, non-stop gluing and folding machine incorporating ‘Pick and Place’, for the production of the display product ‘Pop-up’.
 
AUTOMATIC POPUP MACHINE
The process is achieved by an automated production line for mounting the Display product “Popup”. The idea is that the product should be 100% recyclable with minimal environmental impact as possible.
 
The fully connected machine
The machine is equipped and connected with both a web portal and a remote support assistant link directly to Lamina.
 
Connect to the machine with Any Smartphone
You can connect and check the machine status and production directly on your phone or web browser on the computer.
 
The Inlays - Pappy®
The Inlay support of the Popup display carries the brand name “Pappy®”. Pappy® is manufactured completely from corrugated cardboard based on the recommended material specification.
Furthermore, Pappy® may also be communicated in printed form. All products displaying “Pappy” must be manufactured in accordance with approved design and product quality, and be original from the outset.
 
The Popup
The two outer panels are assembled together to form a cylindrical/pillar type shape by means of a combined folding & inline gluing process along the length of each side. To create and maintain its intended cylindrical shape, interior support(s) is/are mounted/positioned (Pappy). The number of supports used is determined by the type of display produced. Variations of the interior support(s) design are available and may be procured subject to discussion and subsequent agreement. The visible surface of the Popup should also be made from recommended cardboard.

More Less

Product category: Laminating machines

BASIC SEMI-AUTOMATIC SHEET-TO-SHEET LAMINATING/MOUNTING MACHINE

The Lamina semi-automatic Basic is a sheet-to-sheet laminating/mounting machine. It is an entry level machine that can expand your nishing business for a low investment.
A wide range of ancillary equipment is available to optimise the e ciency of your machine including Automatic Feeders, Stackers, Pressure Belt, Flip-Flop, Pre-Loading Station etc.

Lamina semi-automatic laminating machine type BASIC
A Lamina Model semi-sheet laminator - For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated.

The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy up to +/- 0,2 mm when proper materials and conditions exist.

Lamina's laminating machine type BASIC is equipped with:
- Precision gluing unit wich automatic glue application
- Automatic substrate continuous sheet feeder
- Manual top sheet feeder
- Laminating station with automatic front and side registration system
- Pressure station
- Stacking table
- PLC control system

Automatic substrate continuous sheet feeder
For automatic feeding of the bottom sheet. The sheets are fed by continuous running vacuum belts. The stack is filled from the top. The feeder is designed to handle materials with a thickness from 0,6 mm up to 10 mm.

Manual top sheet feeder
The feeder is designed to handle materials from 200 mm - 1100 mm.

Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.

Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispensers directly connected to the glue container. The glue is automatically kept by a sengar. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. The sheets are registered automatically at the edge as well as at the operator side, resulting in accuracy levels less than +/- 0,5 mm. Photocells prevent the lamination process unless both sheets are properly positioned.

Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.

PLC control system
The Lamina PLC control system includes:
Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

More Less

Product category: Laminating machines

SA SEMI-AUTOMATIC SHEET-TO-SHEET LAMINATING/MOUNTING MACHINE

The Lamina SA is a sheet-to-sheet semi-automatic laminating/mounting machine. It has an automatic suction cup feeder for bottom sheets and a hand fed operation for top sheets. The machine is very operator-friendly, and because of the modular construction it allows upgrading to fully automatic with little or no disruption.
A varying amount of top and bottom sheets can be handled in the machine, and because of its compact size the machine is very easy to integrate in your working area.
A number of options such as Single Face Feeder, Down Stacker, Pressure Belt etc. can be added whenever it is required.

Lamina semi-automatic laminating machine type 1110-1620 SA, 800/-
A Lamina Model semi-sheet laminator - For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated.

The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy up to +/- 0,2 mm when proper materials and conditions exist.

Lamina's laminating machine type 1110-1620 SA is equipped with:
- Automatic substrate sheet feeder
- Precision gluing unit with automatic glue application
- Laminating station with automatic front and side registration system
- Pressure station
- Stacking table
- PLC control system

Automatic substrate sheet feeder
For automatic feeding of the bottom sheet. Suction cups pick up the top sheet from the stack and transfer it to the precision gluing unit. The feeder is designed to handle materials from 250 gm/m2 to 10 mm (0,39) 1 pts = 28,25 g/m2 corrugated from 0,6-10 mm (0,016 - 0,39).
Manual top sheet feeder
The feeder is designed to handle materials 800 mm (32)

Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispensers directly sonnected to the glue container. The film thickness of the glue is automatically kept under control irrespective of the sheet (board) thickness. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. the sheets are registered automatically at the lead as well as at the operator side, resulting in accuracy levels up to +/- 0,2 mm. Photocells prevent the lamination process unless both sheets are properly positioned.

PLC control system
The Lamina PLC control system includes:
Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.

Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

FOLDER GLUER

FOLDER GLUER
The Lamina Folder Gluer is a very compact and effective fully automatic folder gluer. The machine is equipped with a non-stop suction belt feeder and a variety of guides and belts to handle standard one-point glued boxes or three-point glued crash lock boxes.
Quick set-up is very easily achieved due to the compact construction and the machine is able to run even small quantities, maintaining a high quality.
The machine is a perfect solution to go from manual to automatic gluing operations for a low investment.

Automatic sheet feeder:

Sheets are feed by four vacuum belts with a heavy duty vacuum fan for handling various materials.

Glue equipment:

The gluing unit is hot melt standard but could be a combination of hot melt and cold glue. Programing of the glueline is easily done from the touch screen and can be saved for repeat orders.

Registration unit:

The registration unit is adjustable for different flaps and is controlled by a combination of mechanical pushing system and photocells.

Folding unit:

The folding of the box is done by a set-up guide system. The folding unit are with an easy set-up adjusted to fit for a number of different constructions of boxes.

Set-up:

All moduls are placed on tracks on the floor and are movable. This system provides the operator with full access to the machine and enables an easy and quick set-up.

Options:

The Lamina Folder Gluer can be equipped with options like Pressure belt etc.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

Displayline

Displayline is an innovative and unique one- phase/one-pass fully automated production line, high speed & high capacity, non-stop gluing and folding machine incorporating “Pick & Place” for the production of the display product.

AUTOMATIC DISPLAY MACHINE
A high speed & high capacity fully automatic non-stop gluing & folding machine incorporating “Pick & Place”, for the production of 1 to 3 part Point of Sale (POS) displays and standard displays of simple or complex configurations. The uniqueness of the Displayline is its ability to achieve a one phase / one pass production line ready for direct packing & onward distribution to the customer.

A non-stop automatic vacuum belt feeder that has the capacity to accommodate up to 3 separate parts of the display. Pick & Place phase aligns parts of the display, applies the glue string(s), while the Pick & Place simultaneously collects and positions the 3rd part of the display with pin-point accuracy. Preparation for the manual mounting of insert(s)/support(s). A final series of glue string(s) are applied with precision, in preparation for the final folding sequence. The completed display passes through a Press Station which provides effective and sufficient pressure. The robot Pick & Place automatically collects the completed display from the conveyor system and delivers it onto a pallet for final packaging and distribution directly to the customer.

The fully connected machine
The machine is equipped and connected with both a web portal and a remote support assistant link directly to Lamina (option).

Connect to the machine with Any Smartphone
You can connect and check the machine status and production directly on your phone or web browser on the computer (option).

The Display design
The innovative design and construction of the Displayline gives the customer the freedom to choose between fully automatic Pick & Place, or manual mounting/unload.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

Packline

The Packline is a fully automatic high speed & high capacity non-stop box closing machine for the internationally reconized FEFCO 410 range corrugated boxes. This unique production line incorporates pin-point precision gluing, folding/flap-folding and accurate closure of the completely packed & labelled box, producing a high quality product in ‘one-pass’ ready for direct distribution to the customer.

Estimated production: 300 completed packed boxes/phr
2 to 3-man operator production line (reduces manpower of manual line by 5 to 6 operators)
Set-up time estimated approximately 15 mins
Lamina Industry 4.0
Consistent high quality packaging
Touch screen display

The package design
The Fefco 410 is a fold-type box with tray and lid from one piece cardboard for packing items that are low in height but, with its flexibility in width and length it is ideal for signs & displays, and of course, a multitude of industry and household items. With its multi-layer corners and sides it is a strong and stable box for stacking on pallets and to protect the packed products during the transportation.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

GLUELINE

The Lamina Glueline is a fully automatic non-stop gluing and folding machine for one piece or two piece boxes. The machine works with two heavy duty vacuum controlled belt feeders which feed in the one or two pieces. By using Lamina’s registration system and non-stop feeder, the machine is extremely e ective for two piece boxes. The Glueline can work with hot-melt, cold glue or a combination of both. The machine feeds in one or two pieces into the two piece registration unit after applying glue and then continues to the next station for folding, gluing and nal nishing. The Glueline is built in modules that can be separated for full access during set-up and o ers a choice of units depending on requirements.

Automatic sheet feeder:
Sheets are fed by four vacuum belts with a heavy duty vacuum fan for handling various materials. The feeder can be set for 2 piece products or single boxes.

Glue equipment:
The gluing unit is hot melt standard but could be a combination of hot melt and cold glue. Programing of the glueline is easily done from the touch screen and can be saved for repeat orders.

Registration unit:
The registration unit is adjustable for different flaps and is controlled by a combination of mechanical pushing system and photocells.

Folding unit:
The folding of the box is done by a set-up guide system. The folding unit are with an easy set-up adjusted to fit for a number of different constructions of boxes.

Set-up:
All moduls are placed on tracks on the floor and are movable. This system provides the operator with full access to the machine and enables an easy and quick set-up.

Options:
The Glueline can be equipped with options like Pressure belt and automatic Downstacker. An extra option is needed for products where the glue flap has the same length as the material.

More Less

Product category: Laminating machines

FA 800/500

The Lamina FA is a highly accurate sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market.
The compact construction makes the machine operator-friendly with a very short set-up time. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. A number of options such as Single Face Feeder, Flip-Flop, Down Stacker, Pressure Belt etc. can be added whenever required.

A Lamina Model 1116-1620 full sheet laminator
For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated. The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy of less than +/- 0,5 mm when proper materials and conditions exist.

Lamina's laminating machine type FA is equipped with:
- Automatic substrate sheet feeder
- Automatic top sheet feeder
- Precision gluing unit with automatic glue application
- Laminating station with automatic front and side registration system
- Pressure station
- Stacking table
- PLC control system

Automatic substrate sheet feeder
For automatic feeding of the bottom sheet. Suction cups pick up the top sheet from the stack and transfer it to the precision gluing unit. The feeder is designed to handle materials from 250 gm/m2 to 10 mm (0,39) 1 pts = 28,25 g/m2 corrugated from 0,6-10 mm (0,016 - 0,39).

Automatic top sheet feeder
For automatic feeding of top sheets. Suction cups pick up the top sheet from the stack and transport it to the top sheet conveyor. The feeder is designed to handle materials 130-450 g/m2 1 pts = 28,25 g/m2.

Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispenser directly connected to the glue container. The glue is automatically kept under control by a sensor. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. the sheets are registered automatically at the lead as well as at the operator side, resulting in accuracy levels less than +/- 0,5 mm. Photocells prevent the lamination process unless both sheets are properly positioned.

Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.

Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.

PLC control system
The Lamina PLC control system includes: Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

More Less

Product category: Laminating machines

BLACKLINE - HIGH CAPACITY

The Lamina FA Blackline 1600/800 is a fully automatic, high speed sheet-to-sheet laminating/mounting machine designed for one operator. The machine model is constructed with high capacity feeders for top and bottom sheets that can be reloaded directly on pallets.
Because of the compact construction it is a very operator friendly machine with quick set-ups and easy handling. The machine can handle most of the materials on the market with a high output and
perfect registration. Lamina FA Blackline can be upgraded with several options such as Pressure Belt, Downstacker, Flip-Flop, Single Face Feeder etc.

A Lamina Model BLACKLINE FA sheet laminator
For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated.

The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy of less than ± 0,5 mm when proper materials and conditions exist.
Lamina's laminating machine type FA is equipped with:
- Automatic substrate rear edge sheet feeder
- Automatic top sheet rear edge feeder
- Precision gluing unit with automatic glue application
- Laminating station with automatic front and side registration system
- Pressure station
- Stacking table
- PLC control system

Automatic substrate sheet feeder
For automatic feeding of the bottom sheet. Suction cups pick up the bottom sheet from the rear edge of the stack and transfer it to the precision gluing unit. The full line of suction cups is easy to move on a guide for a quick set-up. The feeder is designed to handle materials from 250 gm/m2 with a thickness of 0,6 - 10 mm.

Automatic top sheet feeder
For automatic feeding of top sheets. Suction cups pick up the top sheet from the rear edge of the stack and transport it to the top sheet conveyor. The full line of suction cups is easy to move on a guide for a quick set-up. The feeder is designed to handle materials 130-450gm/m2.

Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispensers directly connected to the glue container. The film thickness of the glue is automatically kept under control irrespective of the sheet (board) thickness. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. The precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. The sheets are registered automatically at the edge as well as at the operator side, resulting in accuracy levels less than +/- 0,5 mm. Photocells prevent the lamination process unless both sheets are properly positioned.

Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.

Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.

PLC control system
The Lamina PLC control system includes: Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

More Less

Product category: Laminating machines

FASLINE

The high speed laminating/mounting machine FASLINE is a one operator machine, especially developed for thicker bottom sheet material, such as open or double faced corrugated, foam board, cardboard etc.
The machine is equipped with a rear edge feeder for the top sheets and a suction belt feeder for the bottom sheets, which increases the loading capacity for the topsheets and provides a non-stop function for the bottom feeder. The machine can be upgraded with Pressure Belt, Flip-Flop unit and Automatic Stacker.

Lamina fully automatic laminating machine type FASLINE
A Lamina Model full sheet laminator - For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated. The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy of less than +/- 0,75 mm when proper materials and conditions exist.

Lamina's laminating machine type FASLINE is equipped with:
- Automatic non-stop substrate sheet feeder
- Automatic stream sheet feeder for the top sheet
- Precision gluing unit with automatic glue application
- Laminating station with automatic front and side registration system
- Pressure station
- Stacking table
- PLC control system

Automatic substrate sheet feeder
For automatic feeding of the bottom sheet. The sheets are fed by continuous running belts. The stack is filled from the top. The feeder is designed to handle materials with a thickness from 0,6 mm up to 10 mm.

Automatic top sheet feeder
For automatic feeding of top sheets. Suction cups pick up the top sheet from the stack and transport it to the top sheet conveyor. The feeder is designed to handle materials 180-400 gm/m2.

Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispenser directly connected to the glue container. The glue is automatically kept under control by a sensor. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. The sheets are registered automatically at the edge as well as at the operator side. Photocells prevent the lamination process unless both sheets are properly positioned.

Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.

Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.

PLC control system
The Lamina PLC control system includes: Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

More Less

Product category: Laminating machines

FASLINE+

The Lamina FASLINE+ is a fully automatic high speed sheet-to-sheet laminating/mounting machine. The machine is equipped with a high capacity rear edge top feeder allowing loading of pallets directly in to the unit to shorten stops due to reloading.
Bottom sheets are fed in to the machine by using a servo controlled non-stop belt feeder. The feeder is equipped with a heavy duty vacuum system to assure reliable feeding of various substrates.
Set-ups are quick and easily done because of the compact construction and easy operation. Lamina FASLINE+ is performing a high quality registration accuracy combined with an high output and non-stop production.

Lamina fully automatic laminating machine type FASLINE+
A Lamina Model FASLINE+ full sheet laminator - For sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated. The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy of less than +/- 0,5 mm when proper materials and conditions exist.

Lamina's laminating machine type FASLINE+ is equipped with:
- Automatic non-stop substrate sheet feeder
- Automatic stream sheet feeder for the top sheet
- Precision gluing unit with automatic glue application
- Laminating station with automatic front and side registration system
- Pressure station
- Stacking table
- PLC control system

Automatic substrate sheet feeder
For automatic feeding of the bottom sheet. The sheets are fed by continuous running belts. The stack is filled from the top. The feeder is designed to handle materials with a thickness from 0,6 mm up to 10 mm.

Automatic top sheet feeder
For automatic feeding of top sheets. Suction cups pick up the top sheet from tha stack and transport it to the top sheet conveyor. The feeder is designed to handle materials 180-350 gm/m2.

Precision gluing unit
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispenser directly connected to the glue container. The glue is automatically kept under control by a sensor. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. The sheets are registered automatically at the edge as well as at the operator side. Photocells prevent the lamination process unless both sheets are properly positioned.

Press station
This unit consists of an adjustable press roller system ensuring perfect lamination.

Stacking table
For the stacking of finished products. the table can be turned and pulled out acc to requirements.

PLC control system
The Lamina PLC control system includes: Touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

GLUER

The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials.
The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc.

The Lamina gluer is a straight line gluing machine constructed on a sturdy frame of extruded, anodized aluminium profiles. the machine is designed for manual feeding of diecut, creased and slotted materials. The blanks are positioned by the operator and the hot melt unit applies the glue during the passage through the machine. the length and the exact position of the glue line are easily pre-set - PLC + Touch screen.
A system of press rollers ensures perfect adhesion and guides the glued blanks to a stacking unit wich is easily adjustable for different sizes. the machine is equipped with adjustable and interchangeable side guides also allowing gluing of 2-piese boxes. Tha Lamina Gluer is delivered ready-made for connection to the electrical and pneumatical systems.

More Less

Product category: Fold gluing machines, Corrugated board converting machines

WS and FWS

WS and FWS
The Lamina Working Station is a free standing module or an option for the Hot-Melt Gluer. As an option the free standing module can be equipped with its own programmable Hot-Melt unit for up to 4 glue guns.

Transport:
The Material is transported by four vacuum belts, witch bring the sheets to the stop bar for further operations.

The vacuum is created by a fan, that controls the sheets for easy handling and perfect registration.

During production the operator has full access above the sheets for further mounting due to the vacuum belt system.

Pressure rollers:
The material is passing two pressure rollers in the end of the machine for a perfect tack.

Registration:
The registration is +/- 1 mm and is done with a combination of a photocell and a pusher guide. The operator is using side lays to get an easy mounting procedure in the station.

WS
The Lamina Working Station is an option for the Lamina Gluer. The product is fed through the Gluer that will apply the programmed glue lines and continue into the Working Station where it is positioned on the vacuum belts. The second piece is mounted and positioned by using side lays and pneumatic stops for high quality finishing. The unit is adjustable to suit a range of products from single to multi part displays, boxes, large back supports, shelves and many more.

FWS
The Lamina Free Standing Working Station is a highly exible machine for hot-melt gluing where cold gluing could be added as an option. The Working Station is equipped with its own progammable glue unit for up to four glue guns.
The material is fed manually directly into the Working Station. After applying the glue the sheet is controlled by four vacuum belts for perfect registration.
The Working Station is epecially developed for larger multi-part displays, shelves, large back supports etc.

More Less

Product category: Corrugated board converting machines

Tape Table

The Lamina Tape Table is a manual or automatic fed taping machine.
By the genius construction it is able to handle various sizes of different materials.

The tool free set-up allows a quick change over even for a short run.

The Lamina Tape Table is a straight line taping machine constructed on a sturdy frame of extruded aluminium pro les. The machine is designed for manual feeding of diecut, creased and slotted materials. The blanks are positioned by the operator and the tape applicator applies the tape as it passes through the machine. The length and the exact position of the tape lines are easily set with its simple to use touch screen.
A system of press rollers ensures perfect adhesion and guides the taped blanks to a stacking unit which is easily adjustable for different sizes. The Lamina Tape Table is delivered ready-made for connection to the electrical and pneumatical systems.

More Less

About us

Company portrait

Lamina System AB is a world leading supplier of sheet to sheet laminating/mounting and gluing machines.

Lamina is famous worldwide for it's innovative approach to all of it's product range, for building compact and operator friendly machines.