Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
G Technologies Group - Giardina Graphic
Via Maestri Comacini, 12,
22072
Cermenate (CO)
Italy
Italy
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Media files
Corporate VideoInnovation - Creativity - Flexibility
Contact
Samuele Guidolin
Chief Sales Director
Alessandro Riva
Sales Manager Italy
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.170 Coating units
Coating units
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.250 Dryers
Dryers
- DQ - High power (200 W/cm) air-fluid cooled UV curing system
- DQ-1 - High power (240 W/cm) air-fluid cooled UV curing system
- DQ-INERT and DQ1-INERT - Air/fluid cooled UV curing inert systems
- RWQ - High power (240 W/cm) fully air-cooled UV curing system
- RQW-S - High power (240W/cm) fully air-cooled UV curing system for intermittent screen printing machines
- RQN-1 - High power (200 W/cm) fully air-cooled UV curing system for narrow web machines
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.265 IR/dry air dryers, IR/hot air dryers
IR/dry air dryers, IR/hot air dryers
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.270 IR dryers, infrared dryers
IR dryers, infrared dryers
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.290 UV dryers (conventional and LED)
UV dryers (conventional and LED)
- G-LED System - High Performance LED UV curing Systems
- DQ - High power (200 W/cm) air-fluid cooled UV curing system
- DQ-1 - High power (240 W/cm) air-fluid cooled UV curing system
- DQ-INERT and DQ1-INERT - Air/fluid cooled UV curing inert systems
- RWQ - High power (240 W/cm) fully air-cooled UV curing system
- RQW-S - High power (240W/cm) fully air-cooled UV curing system for intermittent screen printing machines
- RQN-1 - High power (200 W/cm) fully air-cooled UV curing system for narrow web machines
- 06 equipment / services / infrastructure
- 06.01 Peripheral equipment
- 06.01.305 Roller finishing machines
Roller finishing machines
Our products
Product category: UV dryers (conventional and LED)
G-LED System - High Performance LED UV curing Systems
This technology is used to cure inks and coatings with UV light, offering significant potential for the printing and coating industry. Giardina Graphic provides a range of LED UV curing systems for a variety of different requirements. In addition to conventional UV systems, the Giardina Graphic product range also includes a selection of LED UV curing systems for a number of industrial solutions. What makes Giardina Graphic stand out is the delivery and integration of complete systems that are ready for operation. LED reactive chemicals are required in order to use LED technology. These LED inks and coatings can be cured in a fraction of a second but must always be tailored to the substrate in question. The compact design of the G-LED modules used makes it possible for them to be installed in a variety of machines. Once the technical requirements have been met, the G-LED curing systems offer a range of advantages compared with classic UV lamp technology. UV LED technology boasts a number of core properties, such as that it is environmentally friendly, energy saving and ready for immediate use. The G-LED modules also transmit only a small amount of heat to the substrate, enabling high quality processing even for heat sensitive substrates. The compact G-LED modules feature a particularly long service life. The G-LED systems are effective for the curing of LED inks and coatings in the following printing machines: SHEETFED OFFSET, WIDE WEB FLEXO, NARROW WEB FLEXO, METAL DECORATING OFFSET, INK-JET, SILK-SCREEN, SPECIAL.
Benefits:
Benefits:
- Significant energy saving
- Ready to use as soon as switched on (No warm-up)
- Stepless adjustment
- Low penetration of heat into the substrate
- Zero environmental impact– No mercury – No ozone
- High radiation power
- Compact design
- Long service life
- No fans required – No air ducts
- Installation both on new and existing machines
- COB (Chip on Board) modular card - dim. 21 x 60 mm.
- 40 W/cm² specific power
- Various emission spectra (365 nm to 405 nm)
- Refrigerant cooling
- 25 °C max. operating temperature
- AC operation
- > 20.000 hour average LED lifespan
- PLC – digital interface (emergency stop, LED- on, LED- off)
- “DUO SYSTEM” interchangeability (arc lamps/Led UV)
- One electronic power supplier only (arc lamps/Led UV)
- Supplied power adjustment according to press speed (0-10 V signal)
Product category: UV dryers (conventional and LED), Dryers
DQ - High power (200 W/cm) air-fluid cooled UV curing system
The new dichroic reflectors mod. DQ by Giardina Graphic have been purposely designed to dry heat-sensitive UV products by assuring high production speeds and low temperatures when printing. They are realized in special aluminium extrusions and can be installed both on C.I. drum and on stack machines.
The vacuum created by cooling fans as well as the forced circulation cooling fluid and the antireflection protection guards assure low operation temperatures and absolute safety to operators as well as safeguard of the work place.
The rotation of reflectors is synchronized with printing machine and allows its stops without putting out lamps which automatically function at reduced power.
Reflectors are easily removable both for web insertion and for maintenance.
Special quartz inserts duly treated with dielectric material multilayer deposit are interposed in order to obtain a very good UV ray reflection and a considerable infrared radiation reduction.
The reflectors mod. DQ are predisposed to be used under inert atmosphere and can be supplied with specific powers up to 200 W/cm and 2000 mm. arc.
Technical features:
The vacuum created by cooling fans as well as the forced circulation cooling fluid and the antireflection protection guards assure low operation temperatures and absolute safety to operators as well as safeguard of the work place.
The rotation of reflectors is synchronized with printing machine and allows its stops without putting out lamps which automatically function at reduced power.
Reflectors are easily removable both for web insertion and for maintenance.
Special quartz inserts duly treated with dielectric material multilayer deposit are interposed in order to obtain a very good UV ray reflection and a considerable infrared radiation reduction.
The reflectors mod. DQ are predisposed to be used under inert atmosphere and can be supplied with specific powers up to 200 W/cm and 2000 mm. arc.
Technical features:
- Mixed air-fluid cooling
- Reflector rotation on stand-by condition
- UV lamp power reduction automatic system on stand-by condition
- UV lamp power regulation synchronized with machine speed
- Dichroic system for printing on thermosensitive materials
- Quick reflector body extraction for lamp change and maintenance
- Quick coupling connectors for electrical, hydraulic and pneumatic connections
- “DUO” interchangeability (Arc lamps/UV LED)
- One only electronic power supplier (Arc lamps/UV Led)
Product category: UV dryers (conventional and LED), Dryers
DQ-1 - High power (240 W/cm) air-fluid cooled UV curing system
The new dichroic reflectors mod. DQ1 by G Technologies stand for an evolution if compared with the reflectors mod. DQ and have been purposely designed to reach high production speeds and low temperatures when printing. They are realized in sturdy aluminium extrusions and can be installed both on C.I. drum machines (spaces permitting) and on stack ones. The vacuum created by cooling fans as well as the forced circulation cooling fluid and the anti-reflection protection guards assure low operation temperatures and absolute safety to operators as well as safeguard of the work place. The rotation of reflectors is synchronized with printing machine and allows its stops without putting out lamps which automatically function at reduced power. Reflectors are easily removable both for web insertion and for maintenance. Special quartz inserts duly treated with dielectric material multilayer deposit are interposed in order to obtain a very good UV ray reflection and a considerable infrared radiation reduction. Also the reflectors mod. DQ1 are predisposed to be used under inert atmosphere and can be supplied with specific powers up to 240 W/cm and 2500 mm. arc.
Technical features:
Technical features:
- Mixed air-fluid cooling
- Reflector rotation on stand-by condition
- UV lamp power reduction automatic system on stand-by condition
- UV lamp power regulation synchronized with machine speed
- Dichroic system for printing on thermosensitive materials
- Quick reflector body extraction for lamp change and maintenance
- Quick coupling connectors for electrical, hydraulic and pneumatic connections
- “DUO” interchangeability (Arc lamps/UV LED)
- One only electronic power supplier (Arc lamps/UV Led)
Product category: Dryers, UV dryers (conventional and LED)
DQ-INERT and DQ1-INERT - Air/fluid cooled UV curing inert systems
Atmospheric oxygen reduces the effectiveness of UV curing in some inks and coatings.
The inert gas curing system can be used to overcome this problem. Inert gas (usually nitrogen gas) is used to purge the polymerisation chamber of oxygen, thereby greatly increasing the production speeds of the machines.
The inert gas curing system is applicable to the DQ and DQ1 series reflectors, which can be supplied with specific wattages up to 240 W/cm and a light arc of 2,500 mm.
The advantages of inert gas curing:
The inert gas curing system can be used to overcome this problem. Inert gas (usually nitrogen gas) is used to purge the polymerisation chamber of oxygen, thereby greatly increasing the production speeds of the machines.
The inert gas curing system is applicable to the DQ and DQ1 series reflectors, which can be supplied with specific wattages up to 240 W/cm and a light arc of 2,500 mm.
The advantages of inert gas curing:
- Allows curing of low migration inks for food quality applications
- Improves the cure rate of all free radical inks
- Enables curing of free radical silicone coatings
- Reduces ink odour
- "Laminar barrier" system for uniform introduction of nitrogen into the curing chamber
- Oxygen analyser through a special sensor located inside the curing chamber to monitor oxygen concentration in parts per million (ppm). The operator can set the desired maximum oxygen level and the system automatically adjusts the nitrogen input flow for better curing.
- Control and monitoring touchscreen for the entire process. The HMI displays real-time oxygen levels for each lamp, along with any related alerts and alarms.
Product category: Dryers, UV dryers (conventional and LED)
RWQ - High power (240 W/cm) fully air-cooled UV curing system
The new reflectors mod. RQW have been designed by G Technologies to meet the needs of particularly high powers which are present in the market of wide web printing machines. They are extremely sturdy and made by four anodized aluminium extrusions and a light outside case. Reflector inside surface is covered by special dichroic mirrors able to reflect 98% of ultraviolet radiation and to absorb more than 85% of infrared radiation. Also the reflectors RQW are inside cooled by forced air to assure an efficient and economic elimination of produced heat and ozone. The inside geometries have been purposely studied in order to reduce UV lamp contamination from ink and varnish volatile particles as well as dust. The reflectors RQW can be supplied with specific powers up to 240 W/cm and 1050 mm. arc.
Technical features:
Technical features:
- Forced air cooling
- Reflector rotation on stand-by condition
- U.V. lamp power reduction automatic system on stand-by condition
- U.V. lamp power regulation synchronized with machine speed
- Dichroic system for printing on thermosensitive materials
- Quick reflector body extraction for lamp change and maintenance
- Quick coupling connectors for electrical and pneumatic connections
- “DUO” interchangeability (Arc lamps/UV LED)
- One only electronic power supplier (Arc lamps/UV Led)
Product category: Dryers, UV dryers (conventional and LED)
RQW-S - High power (240W/cm) fully air-cooled UV curing system for intermittent screen printing machines
The new reflectors mod. RQW have been designed by Giardina Graphic to meet the needs of particularly high powers which are present in the market of wide web printing machines. They are extremely sturdy and made by four anodized aluminium extrusions and a light outside case. Reflector inside surface is covered by special dichroic mirrors able to reflect 98% of ultraviolet radiation and to absorb more than 85% of infrared radiation. Also the reflectors RQW are inside cooled by forced air to assure an efficient and economic elimination of produced heat and ozone. The inside geometries have been purposely studied in order to reduce UV lamp contamination from ink and varnish volatile particles as well as dust. The reflectors RQW can be supplied with specific powers up to 240 W/cm and 1050 mm. arc.
Technical features:
Technical features:
- Forced air cooling
- Reflector rotation on stand-by condition
- U.V. lamp power reduction automatic system on stand-by condition
- U.V. lamp power regulation synchronized with machine speed
- Dichroic system for printing on thermosensitive materials
- Quick reflector body extraction for lamp change and maintenance
- Quick coupling connectors for electrical and pneumatic connections
Product category: Dryers, UV dryers (conventional and LED)
RQN-1 - High power (200 W/cm) fully air-cooled UV curing system for narrow web machines
The new range of the reflectors mod. RQN-1 realized by Giardina Graphic joins a high lamp specific power to small dimensions which allow their installation on most of
narrow web machines which are nowadays present on the market. The new reflectors mod. RQN-1 are made of an extremely sturdy and light compact structure consisting of the assembly of four anodized aluminium extrusions. Reflector inside surface is covered by special dichroic mirrors able to reflect 98% of ultraviolet radiation and to absorb more than 85% of infrared radiation. Reflectors are inside cooled by forced air to assure an efficient and economic elimination of produced heat and ozone. The inside geometries have been purposely studied in order to reduce UV lamp contamination from ink and varnish volatile particles as well as dust. The reflectors RQN-1 can be supplied with specific powers up to 200 W/cm and 550 mm. arc.
Technical features:
narrow web machines which are nowadays present on the market. The new reflectors mod. RQN-1 are made of an extremely sturdy and light compact structure consisting of the assembly of four anodized aluminium extrusions. Reflector inside surface is covered by special dichroic mirrors able to reflect 98% of ultraviolet radiation and to absorb more than 85% of infrared radiation. Reflectors are inside cooled by forced air to assure an efficient and economic elimination of produced heat and ozone. The inside geometries have been purposely studied in order to reduce UV lamp contamination from ink and varnish volatile particles as well as dust. The reflectors RQN-1 can be supplied with specific powers up to 200 W/cm and 550 mm. arc.
Technical features:
- Forced air cooling
- Reflector rotation on stand-by condition
- U.V. lamp power reduction automatic system on stand-by condition
- U.V. lamp power regulation synchronized with machine speed
- Dichroic system for printing on thermosensitive materials
- Quick reflector body extraction for lamp change and maintenance
- Quick coupling connectors for electrical and pneumatic connections
- “DUO” interchangeability (Arc lamps/UV LED)
- One only electronic power supplier (Arc lamps/UV Led)
Product category: Coating units, Roller finishing machines
GT-COAT System - Roller Application Line
The GT-COAT roller application line was specifically designed by Giardina Graphic for the application of varnishing products on paper, cardboard and plastics substrates, summarizing all the experiences gained in more than thirty years of activity in the production of roller machines and varnishing systems for different industrial sectors. The GTECH STAR-JET roller coating machine contains all the most modern technological solutions nowadays on the market that facilitate its use, guaranteeing high production standards. Made of solid load-bearing structure so as to contain any vibration, it is able to coat supports with a basis weight from 80 to 3.500 g/m2, ensuring maximum reliability at any working speed. The entire processing cycle is monitored by a colour control touch- screen.
The advantages:
The advantages:
- Possibility of using different substrates such as paper, cardboard and plastics
- Easy adjustment of the quantity of product to be applied
- Extremely rapid cleaning system
- Possibility to combine different drying systems such as UV, UV LED and INFRARED
- Compact dimensions
- Possibility of incorporation into existing lines
- High uniformity of application
- Product application from 2 g/m2 to 20 g/m2
- Production speed up to 100 m/min
- Automatic cleaning system
- Maximum adjustment accuracy during sheet feed (0.25 mm on all four sides)
- Control and command touchscreen for the entire process
Product category: IR dryers, infrared dryers, IR/dry air dryers, IR/hot air dryers
GT-IR System
Giardina Graphic manufactures infrared drying systems that can be used in various printing processes as well as in many industrial applications such as reactivation and thermoforming.
The components used to manufacture the IR systems are of the highest quality, guaranteeing high efficiency, long life and constant performance capability over time.
Depending on the drying requirements, the IR systems are supplied with different wavelengths (short, medium-fast, long ) which will provide the right amount of energy needed for evaporation of the aqueous component present in the product to be dried in relation to the printing speed, the amount of product applied and the substrate to print on. The IR systems produced by Giardina Graphic can be installed on sheetfed offset, web flexo, tissue, flexo for direct printing on corrugated board, inkjet and other machines in general.
Technical features:
The components used to manufacture the IR systems are of the highest quality, guaranteeing high efficiency, long life and constant performance capability over time.
Depending on the drying requirements, the IR systems are supplied with different wavelengths (short, medium-fast, long ) which will provide the right amount of energy needed for evaporation of the aqueous component present in the product to be dried in relation to the printing speed, the amount of product applied and the substrate to print on. The IR systems produced by Giardina Graphic can be installed on sheetfed offset, web flexo, tissue, flexo for direct printing on corrugated board, inkjet and other machines in general.
Technical features:
- IR lamps with high radiant efficiency and special back treatment
- quartz barriers to protect the IR lamps
- Laser barriers to control accidental sheet/roll jamming in transit
- Separate lamp lightings per dryer according to printing size
- Power regulation per dryer according to press runspeed by means of (0-10V) analoge signal
- Power optimal management through HSC (Half-Single-Cycle Zero) regulator
- Quick lamp and quartz replacement for maintenance operations
- Control touch-screen with alarm-dedicated screens for easy intuition.
About us
Company portrait
Giardina Graphic was created as a spin-off from Giardina Officine Aeromeccaniche SpA and was acquired in 2009 by G Technologies Group.
Giardina Graphic has been operating for forty years in the international market of the printing industry as a leading supplier of drying systems for various types of substrates such as different types of paper, cardboard, metallised, laminated, plastics (PP, PE, PVC and PET), aluminium, tinplate, steel sheets and other materials.
Giardina Graphic manufactures UV, UV LED, EXCHIMERS, INFRARED and HOT AIR systems, with which it is able to operate in various sectors such as sheet-fed and rotary offset, flexo (wide and narrow web), rotogravure, roto-offset, metal decorating, corrugated board, screen printing, tissue, inkjet and specials, operating in different industrial environments. Moreover, it designs and manufactures ROLLER COATING lines for paper, cardboard, plastics and other supports in general.
To complete its range, Giardina Graphic manufactures modern UV systems for DISINFECTION that can be adapted to any type of environment.
Thanks to the experience gained over the years, Giardina Graphic offers innovative and reliable technological solutions.
Giardina Graphic has been operating for forty years in the international market of the printing industry as a leading supplier of drying systems for various types of substrates such as different types of paper, cardboard, metallised, laminated, plastics (PP, PE, PVC and PET), aluminium, tinplate, steel sheets and other materials.
Giardina Graphic manufactures UV, UV LED, EXCHIMERS, INFRARED and HOT AIR systems, with which it is able to operate in various sectors such as sheet-fed and rotary offset, flexo (wide and narrow web), rotogravure, roto-offset, metal decorating, corrugated board, screen printing, tissue, inkjet and specials, operating in different industrial environments. Moreover, it designs and manufactures ROLLER COATING lines for paper, cardboard, plastics and other supports in general.
To complete its range, Giardina Graphic manufactures modern UV systems for DISINFECTION that can be adapted to any type of environment.
Thanks to the experience gained over the years, Giardina Graphic offers innovative and reliable technological solutions.
Company data
Foundation
1978
