Mega Elektromekanik Mak. Iml. San. Tic. Ltd. Sti of Istanbul at virtual.drupa in Düsseldorf -- drupa - April 20 to 23, 2021 - Messe Düsseldorf
Manage stand orders
Select Option

Mega Elektromekanik Mak. Iml. San. Tic. Ltd. Sti

Dudullu Osb Des-113 C-13 N.58, 34776 Istanbul
Turkey
Telephone +90 216 6124898
Fax +90 216 6124897
info@3esmega.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Contact

Fidan SARI

Managing Director

Phone
+902166124898
+905337045000

Email
fidansari@3esmega.com

Rulla Mohammed

Sales Manager, Middle East

Phone
+902166124898

Email
info@3esmega.com

ERHAN SARI

Team Leader

Phone
+902166124898

Email
info@3esmega.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.055  Copying equipment for flexo plate printing
  • 01  prepress / print
  • 01.05  Equipment & systems for printing forme production
  • 01.05.060  Washing-out units for flexographic printing

Our products

Product category: Washing-out units for flexographic printing

Flexo Plate processor for water washable plates

3ES-PRO-WF is designed as inline photopolymer flexo printing plate washing, rinsing and drying equipment and suitable for processing high-quality plates.
It is the first and only successful inline plate processor for water wash flexo plates in the market that service to largest size of plate as 1060 x 1530 mm.

• The processor is equipped with a state of art filter, which has an ecological friendly and cost effective working qualities.
The state-of-art filter removes polymer residue in washing solution and the clean washing solution is recirculated to washout tank for reuse.

• User-friendly 7" Graphic Touch Screen
• PLC controller with remote technical support by network connection
• 20 channels program memory for different plates of process conditions
• Easy to operate and maintain
• Capable of processing both analog and digital plates
• Pre-wash for LAMS-layer, washing, rinsing, and pre-dryer
• Reliable washing, high quality, and high productivity
• Automatic water and detergent replenishment
• Stainless steel washout body and external tank facility, robust, easy to support and maintain
• Automatic thickness control between 0,6 mm to 7 mm
• Back-side plate cleaning
• Integrated heater and temperature control according to plate type/brand requirement
• Permanent self-adhasive sticky board for partial small size of plate
• CE certificate

More Less

Product category: Washing-out units for flexographic printing

All -in-one flexo plate making equipment for water washable plates

All-in-One plate making equipment for the plate size of 635 x 762 mm. The equipment as a compact unit and it is a combination of PROI-WF flow-line processor and PROI-EDLFb units.
  • 3ES-PROI-WF is designed as inline photopolymer plate pre-washing for digital paltes, washing, rinsing and drying equipment and suitable for processing high quality plates up to a maximum size of 635 x 762 (25" x 30 “) mm.
The processor is equipped with a state of art filter, which has an ecological friendly and cost effective working qualities. State-of-art filter removes polymer residue in washing solution and the clean washing solution is recirculated to washout tank for reuse.

- User-friendly 7" Graphic Touch Screen
- 20 channels program memory for different  plates process conditions
- Easy to operate and maintain
- Capable of processing both analogue and digital plates
- Triple tank system for LAMS-layer cleaning main washing and rinsing
- Pre-wash for digital plates
- Stabile plate transport by pin bar
- Perfect washing result thanks to round and flat brushes combination
- Automatic water and detergent replenishment
- Stainless washout body and strong mechanical  construction
- Suitable for any thickness of plates 0,60 mm to 7,00 mm
- Back-side plate cleaning
- Integrated heater and temperature control according to plate type/brand requirement
- Permanent self-adhesive carrier board for partial small sizes of plate
- External puncher

  •  3ES-PROI-EDLFb is designed for flexo plate making equipment up to a maximum size of  635 x 762 (25" x 30 “) mm.
- Capable of exposing, drying and finishing & post-exposing plate with high quality
- Easy to operate, install and maintain
- 7” Touch screen
- End of job alert

Exposure
- Powerful and fast vacuum system and vacuum indicator on control panel*
- Lamp life calculator
- Defective lamp indicator
- Lamp temperature control and regulation

Drying
- Programmable drying temperature according to plate type/brand requirement
- 2 drying drawer
- Timer for each drawer
- Uniform temperature distribution for excellent drying and plate dimensional  stability

Light Finishing & Post Exposure
- UV-A and UV-C lamps
- Defective lamp indicator
- Fume extraction system

More Less

Product category: Copying equipment for flexo plate printing, Washing-out units for flexographic printing

Flexo Plate Making Equipment, All-in-One for Solvent washable plates /3ES-PROI-SF&EDLFb 635 x 762 mm

All-in-One plate making equipment for the plate size of 635 x 762 mm. The equipment is a compact unit and it is a combination of PROI-SF flow-line processor and PROI-EDLFb units.

3ES-PROI-SF is designed as inline high productivity photopolymer plate washing, rinsing and pre-drying equipment, suitable for processing high-quality plates
•    User-friendly 7" touch screen
•    20 channels program memory for different plates process conditions
•    PLC controller
•    Capable of processing both analogue and digital plates
•    Pre-wash for LAMS-layer, washing, rinsing and pre-drying
•    Dual tank for Pre and Main wash
•    Plate transport by pin bar, drive by chain 
•    Reliable washing, high quality and high productivity
•    Back-side plate cleaning
•    Automatic thickness control between 0,6 mm to 7 mm
•    Automatic solvent replenishment
•    Continuous solvent fume exhaust system
•    Stainless steel washout body and external tank facility, robust, easy to support and maintain
•    Integrated heater-chiller for solvent temperature control between 15°C to 35°C
•    Automatic solvent viscosity measurement and fresh solvent replenishment
•    CE certificate

 

3ES-PROI-EDLFb

- Plate making equipment for flexo plates up to a maximum size of 635 x762 mm.
- Capable of exposing, drying and   finishing & post-exposing plate with high quality
- Easy to operate, install and maintain
- 7” Touch screen
- End of job alert

Exposure
- Lamp life calculator
- Defective lamp indicator
- Lamp temperature control and regulation

Drying
- Programmable drying temperature according to plate type
- 3 drying drawers
- Timer for each drawer
- Uniform temperature distribution for excellent drying an plate dimensional stability

Light Finishing & Post Expose
- UV-A and UV-C lamps
- Defective lamp indicator
- Fume extraction system
- Lamp temperature control and regulation

More Less

Product category: Washing-out units for flexographic printing

Flexo Plate Processor EXCELSOLV

EXCELSOLV is designed as inline high productivity flexo plate washing, rinsing and pre-drying equipment, suitable for processing high-quality plates
• User-friendly 7" touch screen
• 20 channels program memory for different plates process conditions
• Capable of processing both analogue and digital plates
• Pre-wash for LAMS-layer, washing, rinsing and pre-drying
• Dual tank for Pre-wash and Main wash
• Plate transport by pin bar, drive by chain
• Reliable washing, high quality and high productivity
• Back-side plate cleaning
• Automatic thickness control between 0,6 mm to 7 mm
• Automatic solvent replenishment
• Continuous solvent fume exhaust system
• Stainless steel washout body and external tank facility, robust, easy to support and maintain
• Integrated heater-chiller for solvent temperature control between 15°C to 35°C
• Automatic solvent viscosity measurement and fresh solvent replenishment
• CE certificate

More Less

Product category: Copying equipment for flexo plate printing

TOP-LIFT Flexo Plate Exposure

3ES-PROIII/IV-ETLDi

Capable of exposing and finishing & post-exposing* all high quality photopolymer plates at high dot resolution, excellent line definition, deep reverses repeatable results for both back and main exposures to meet the highest HD Flexo standard
  • High power UV-A lamps for high quality at high speed
  • New design for lamp temperature control and regulation
  • Temperature controlled back exposure apply
  • Easy to operate, install and maintain
  • Simplified lamp and glass cleaning and lamp replacing
  • User-friendly 7” touch screen operation panel displays all necessary times and settings
  •  20 programmable channels for different plates process conditions
  • Glass bed for double side (back & main) exposure, without turning plate
  • The top lid opens/closes smoothly and completely, easy access to all four sides of the plate.
  • Suitable for all digital and analog plates
  • Lamp working hour calculator
  • Defective lamp indicator
  • Lamp temperature control and regulation with cooling fan
  • Inspection lamp
  • Electronic ballast
  • End of job alert
  • One drawer for stock/Light Finisher&Post Expose*
  • Integrated punch*
  • CE certificate

3ES-PROIII/IV-ETLCi

Capable of exposing and finishing & post-exposing* all high-quality photopolymer plates at high dot resolution, excellent line definition, deep reverse repeatable results for both back and main exposures to meet the highest HD Flexo standard
  • High power UV-A lamps for high quality at high speed
  • New design for lamp temperature control and regulation
  • Easy to operate, install and maintain
  • Simplified lamp replacing
  • User-friendly 7” touch screen operation panel displays all necessary times and settings
  • 20 programmable channels for different plates process conditions
  • Cool bed with accurate temperature cooling unit 
  • The top lid opens/closes smoothly and completely, easy access to all four sides of the plate.
  • Suitable for all digital and analog plates
  • Lamp working hour calculator
  • Defective lamp indicator
  •  Lamp temperature control and regulation with cooling fan
  • Yellow inspection lamp
  • Electronic ballast
  • End of job alert
  • With punch option

Available sizes:
1060 x 1530 mm
1320 x 2032 mm

More Less

Product category: Copying equipment for flexo plate printing

Flexo Plate Making Equipment

3ES-PROI/II/III-EDLFi
Capable of exposing, drying and finishing & post-exposing all high-quality photopolymer plates at high dot resolution, excellent line definition, deep reverses repeatable results for both back and main exposures to meet the highest HD Flexo standard

•    High power UV-A lamps for high quality at high speed
•    New design for  lamp temperature control and regulation
•    Easy to operate, install and maintain
•    7” Touch screen easily customize and setup for 20 different programs

 Exposure

•    Cool bed with accurate temperature cooling unit
•    Suitable for all digital and analog plates
•    Tube working hour calculator
•    Defective lamp indicator
•    Clamshell design lid with automatic opening-closing
•    Yellow inspection tube 

Drying

•    Programmable drying temperature according to plate type/brand requirement
•    3 drawer
•    Timer for each drawer
•    Easy accessible wide opening drawers for easy operating and high productivity
•    Uniform temperature distribution for excellent drying and plate dimensional stability

•  Automatic switch off after the last plate

Light Finishing & Post Expose

•    UV-A and UV-C lamps
•    Defective lamp indicator
•    Fume extraction system
•    Lamp working hour calculator
•    New design for lamp temperature control and regulation
•  Sequential/simultaneously/separately operating option for Light Finisher and Post Exposure

•    CE certificate  

More Less

Product category: Copying equipment for flexo plate printing

Flexo Plate Dryer

The device is designed for drying flexo plates, it is availble for plate sizes of 1320 x 2032 mm, 1060 x 1530 mm, 900 x 1200 mm.
•    7” touch panel
•    Easy designed operation panel displays all necessary times and settings
•    20 programmable channels for different plates process conditions
•    End of job alert.
•    Easy accessible wide opening drawers for easy operating and high productivity
•    Uniform temperature distribution for excellent drying and plate dimensional stability
•    High heat output for quick optimal temperature
•    Digital timer and countdown facility for each drawer
•    Maximum isolation for heat loss
•    Magnetic sealed drawers
•    Automatic switch off after the last plate
•    Programmable drying temperature according to plate type/brand requirement
•    CE certificate

Availble Sizes:
PROII-D 920X1200 mm
PROIII-D 1060x1530 mm
PROIV-D 1320X2032 mm

More Less

Product category: Copying equipment for flexo plate printing

Automatic Plate Transporting and Loading table

Photopolymer plate loading and transporting table with automatic height adjustable
* 3 programmable height channels
* Manually height adjusting push button between 73 cm to 139 cm
* Manually tilt to both direction
* Built-in, high-performance lithium-ion battery with a capacity of 2.2 Ah

Availble sizes:
900 x 1200 mm
1060 x 1530 mm
1320 x 2032 mm

More Less

About us

Company portrait

3ES is focused on offering high quality products and impressive solutions for flexographic plate making process that comply with all customer segments for Solvent and Water washable flexo plate.

3ES offers;

•Exposing Units
•Processors for Water washable plates
•Processors for Solvent washable plates
•Processors for Letterpress plates
•Dryer Units
•Light Finisher
The production principles of 3ES products are;

•High quality and performance
•Innovative ideas and solutions
•Excellent view and productivity

Company data

Sales volume 1-9 Mio US $
Export content > 75%
Number of employees 1-19
Foundation 1993